• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.914-917
• /
• 2002

We have obtained high performance and low voltage driving OCB panel by reducing the critical voltage and retardation matching between liquid crystal layer and compensation films. The critical voltage in the panel has been minimized by flattening color filter layer and optimizing a rubbing process. In addition, an appropriate retardation of the film and LC layer has scanned to achieve low driving voltage and high transmission. The proto-type 17" WXGA OCB panel has demonstrated with less than 5V drive and over 80 degree for all viewing direction except for rubbing direction with over 90% of TN light efficiency.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.459-462
• /
• 2002

We report viewing angle characteristics of the Ultra-FFS TFT-LCD. The FFS mode is known to exhibit both a wide viewing angle and high transmittance, owing to the approximated in-plane rotation of the LC director. Nevertheless, in the bright state, the device shows bluish and yellowish color parallel and perpendicular to the LC director at off-normal directions since the LC director rotates onl.v in one direction, and in addition, the grey scale inversion exists in large oblique viewing angle. However, the Ultra-FFS shows no grey scale inversion and no color shift in wide viewing angle range.

• Proceedings of the Korea Crystallographic Association Conference
• /
• 2002.11a
• /
• pp.11-11
• /
• 2002

K(H/sub 0.34/D/sub 0.66/)₂PO₄는 KH₂PO₄(KDP)의 수소원자를 중수소가 일부 치환한 결정이다. 실험에 사용한 시료는 KDP 원료시약을 중수(D₂O)에서 성장시킨 것으로, 단결정 구조해석을 통해 D와 H의 점유율을 정련하였다. 본 연구에서는 상전이에 따른 결정구조의 변화를 연구하기 위하여 한국원자력연구소의 연구용 원자로인 하나로에 설치된 고분해능 분말회절장치(HRPD)로 상온에서부터 10K 까지 온도를 변화시켜가며 회절패턴을 측정하였다. 그 결과 190-l95K 사이에서 상전이가 일어났으며, 이것은 DSC(Differential Scanning Calorimetry) 측정결과와 상온에서 단결정 분석결과 D의 점유도로 계산한 상전이 온도와도 잘 일치한다. 10K와 298K에서 측정한 회절패턴에 대해 프로그램 FullProf를 사용하여 각각 리트벨트 구조정련을 수행한 결과, 상온에서는 정방정계이며 공간군은 I-42d 이고 저온에서는 사방정계인 Fdd2로 변한다. 온도변화에 따른 핵밀도 분포를 측정한 결과 상온에서 D/H는 2회 대칭축을 중심으로 50％ 점유도의 두 가지 가능한 위치를 갖는 무질서(disorder) 상태로 존재하나 온도가 내려갈수록 한 쪽으로 치우쳐 상전이 온도 아래에서는 하나의 산소와 결합하여 질서(order) 상태를 보이며 다른 하나와는 수소결합을 이룬다.

• Kyungpook Mathematical Journal
• /
• v.63 no.1
• /
• pp.37-43
• /
• 2023

Let 𝔞 and 𝔟 be ideals of a commutative Noetherian ring R and M be a finitely generated R-module of dimension d > 0. We prove some results concerning the top local cohomology and top formal local cohomology modules. Among other things, we determine Supp_R(𝔟 H^d_𝔞(M)) and Supp_R(𝔟𝔉^d_𝔞(M)). Also, we obtain some relations between Ann_R(𝔟 H^d_𝔞(M)), Att_R(𝔟 H^d_𝔞(M)) and Supp_R(𝔟 H^d_𝔞(M)) and we get similar results for 𝔟𝔉^d_𝔞(M).

• Honam Mathematical Journal
• /
• v.33 no.4
• /
• pp.557-573
• /
• 2011

Let G be a compact and connected semisimple Lie group, H a closed subgroup, g (resp. h) the Lie algebra of G (resp. H), B the Killing form of g, g the normal metric on the homogeneous space G/H which is induced by -B. Let D be an invarint connection with Weyl structure (D, g, ${\omega}$) in the tangent bundle over the normal homogeneous Riemannian manifold (G/H, g) which is projectively flat. Then, the affine connection D on (G/H, g) is a Yang-Mills connection if and only if D is the Levi-Civita connection on (G/H, g).

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1161-1165
• /
• 2009

Safety of workers and productivity in construction site are affected according to the conflict status of work spaces which are performed at a time. The interference among the work spaces in construction site should be minimized because it becomes a blocking factor that causes construction delay and low productivity. Those factors can be managed by reasonable H&S (Health & Safety) practice. This research suggests the requirements of H&S practice and rules to establish the strategy of H&S management based on the literature reviews related to H&S rule. The suggested H&S rule can be visualized for searching space conflict point if the rule is linked with visual simulation tool. Accordingly the research results can be used for improving and visualizing construction productivity by work space control in 4D/nD CAD system.

• 한국가스학회:학술대회논문집
• /
• 2002.05a
• /
• pp.105-110
• /
• 2002

• 한국가스학회:학술대회논문집
• /
• 2003.05a
• /
• pp.31-36
• /
• 2003

• Journal of the Korean Mathematical Society
• /
• v.45 no.4
• /
• pp.1075-1087
• /
• 2008

We study a class of KMS-symmetric quantum Markovian semigroups on a quantum spin system ($\mathcal{A},{\tau},{\omega}$), where $\mathcal{A}$ is a quasi-local algebra, $\tau$ is a strongly continuous one parameter group of *-automorphisms of $\mathcal{A}$ and $\omega$ is a Gibbs state on $\mathcal{A}$. The semigroups can be considered as the extension of semi groups on the nontrivial abelian subalgebra. Let $\mathcal{H}$ be a Hilbert space corresponding to the GNS representation con structed from $\omega$. Using the general construction method of Dirichlet form developed in [8], we construct the symmetric Markovian semigroup $\{T_t\}{_t_\geq_0}$ on $\mathcal{H}$. The semigroup $\{T_t\}{_t_\geq_0}$ acts separately on two subspaces $\mathcal{H}_d$ and $\mathcal{H}_{od}$ of $\mathcal{H}$, where $\mathcal{H}_d$ is the diagonal subspace and $\mathcal{H}_{od}$ is the off-diagonal subspace, $\mathcal{H}=\mathcal{H}_d\;{\bigoplus}\;\mathcal{H}_{od}$. The restriction of the semigroup $\{T_t\}{_t_\geq_0}$ on $\mathcal{H}_d$ is Glauber dynamics, and for any ${\eta}{\in}\mathcal{H}_{od}$, $T_t{\eta}$, decays to zero exponentially fast as t approaches to the infinity.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.6
• /
• pp.106-112
• /
• 2015

Many researchers have proposed analytical methods to measure the adsorption of di-sulpho fluorescent whitening agents (D-FWAs), but practical methods for D-FWA utilization in an actual paper mill have not been established. In particular, the D-FWA adsorption behavior must be monitored in paper mills to ensure the effective use of D-FWAs. This study used the zeta-potential of pulps as an indicator of the adsorption behavior of a D-FWA. We identified the relationship between the actual adsorption of the D-FWA and the zeta-potential of the pulps as a function of D-FWA addition. zeta-potential measurements were then used to analyze the D-FWA adsorption behavior under different conditions of pulp type, conductivity, and pH. The actual adsorption of a D-FWA was proportional to the ${\Delta}zeta-potential$ of the pulps (i.e., the difference between the zeta-potential of a pulp containing no D-FWA and one containing the D-FWA). The ${\Delta}zeta-potential$ of the pulps was therefore adopted for adsorption analysis. A higher adsorption of the D-FWA was observed onto Hw-BKP than onto Sw-BKP because of the shorter fiber length and higher fines content of Hw-BKP. A high conductivity and an acidic pH decreased the D-FWA adsorption because of direct effects of high ion concentrations and low pH on the D-FWA solubility. Therefore, a D-FWA must be added to Hw-BKP under low conductivity conditions and at neutral or alkaline pH to optimize the D-FWA adsorption.