• 한국전기전자재료학회논문지
• /
• 제27권9호
• /
• pp.589-593
• /
• 2014

AlNO multi-layer thin films on aluminum substrates were prepared by DC reactive magnetron sputtering method. $Al_2O_3$/AlNO(LMVF)/AlNO(HMVF)/Al/substrate of 4 multi-layer has been prepared in an Ar and ($N_2+O_2$) gas mixture, and $Al_2O_3$ of top layer is anti-reflection layer on double AlNO(LMVF)/AlNO(HMVF) layers and Al metal of infrared reflection layer. In this study, the roughness and surface properties of AlNO thin films were estimated by field emission scanning electron microscopy(FE-SEM). The grain size of AlNO thin films increased with increasing sputtering power. The composition of thin films has been systematically investigated using electron probe microanalysis(EPMA). The optical properties with wavelength spectrum were recorded by UV-Vis-NIR spectrophotometry at a range of 200~1,500 nm. The absorptance of AlNO films shows the increasing trend with swelling ($N_2+O_2$) gas mixture in HMVF and LMVF deposition. The excellent optical performance showed above 98% of absorptance in visible wavelength region.

• 한국환경농학회지
• /
• 제29권2호
• /
• pp.165-175
• /
• 2010

A gas chromatographic (GC) method was developed to determine residues of captan, folpet, captafol, and chlorothalonil, known as broad-spectrum protective fungicides for the official purpose. All the fungicide residues were extracted with acetone containing 3% phosphoric acid from representative samples of five agricultural products which comprised rice, soybean, apple, pepper, and cabbage. The extract was diluted with saline, and dichloromethane partition was followed to recover the fungicides from the aqueous phase. Florisil column chromatography was additionally employed for final cleanup of the extracts. The analytes were then determined by gas chromatography using a DB-1 capillary column with electron capture detection. Reproducibility in quantitation was largely enhanced by minimization of adsorption or thermal degradation of analytes during GLC analysis. Mean recoveries generated from each crop sample fortified at two levels in triplicate ranged from 89.0~113.7%. Relative standard deviations (RSD) were all less than 10%, irrespective sample types and fortification levels. As no interference was found in any samples, limit of quantitation (LOQ) was estimated to be 0.008 mg/kg for the analytes except showing higher sensitivity of 0.002 mg/kg for chlorothalonil. GC/Mass spectrometric method using selected-ion monitoring technique was also provided to confirm the suspected residues. The proposed method was reproducible and sensitive enough to determine the residues of captan, folpet, captafol, and chlorothalonil in agricultural commodities for routine analysis.

• 조명전기설비학회논문지
• /
• 제19권7호
• /
• pp.39-44
• /
• 2005

고연료 중 대부분이 수소와 탄소의 결합물이다. 연료들은 엔진 내부에서 완전 연소되었을 경우는 수분인 증기와 $CO_2$가 발생된다. 그러나 대개 불완전 연소가 일어나 $NO_x$나 Smoke가 발생되어진다. 그리고 이 물질은 인해에 매우 해로운 물질들이다. 본 논문에서는 EGR과 상용주파수를 이용한 플라즈마 장치를 조합하여 배기가스 유해물질 제거 특성을 연구하였다. $NO_x$의 경우에는 전압과 EGR율이 증가할수록 유해물질 제거 특성이 우수하였고, Smoke의 경우에는 EGR 율이 증가하게 되면 Smoke의 발생율이 증가하였으나 전압이 증가하게 되면 발생율이 감소하였다.

• 한국자동차공학회논문집
• /
• 제18권6호
• /
• pp.53-62
• /
• 2010

An airbag is composed of housing assembly, door assembly, cushion assembly, and an inflator. The inflator is the essential part that generates gas for airbag. When an airbag is activated, it effectively absorbs the crash energy of the passenger by inflating a cushion. In this study, tank tests were performed with newly synthesized propellants with various compositions, and the results are compared with the numerical results. In the simulation of inflator, a zonal model has been adopted which consisted of four zones of flow regions: combustion chamber, filter, gas plenum, and discharge tank. Each zone was described by the conservation equations with specified constitutive relations for gas. The pressure and temperature of each zone of the inflator were calculated and analyzed and the results were compared with the tank test data. In the zone of discharge tank the pressure quickly rose, the pattern of pressure curve was very similar to the pressure curve of real test. And in zone 1 & 2 & 3 the mass of products was increased and decreased with time. In zone 4, the mass of products was increased with time like real inflator. From the similarity of pressure curve in zone 4 and closed bomb calculation the modeled results are well correlated with the experimental values.

• 환경위생공학
• /
• 제24권4호
• /
• pp.112-115
• /
• 2009

This research was performed to purify water quality through removing T-N, and T-P and to estimating rate of $NO_x$ by the response of photocatalyst using ceramics. The ceramics was a mixtures of Titanium Diboride($TiB_2$) which is used to develop armored cars with excellent protective power and lightness, Olivine, and Hwangto with water and was furnaced for an hour at $1160^{\circ}C$. Hwangto and Olivine used in the study are produced at Haenam-gun, Jeonnam, and Andong-city, Gyeongsangbuk-do, respectively. The ground Hwangto and Olivine were seived through PR $100{\times}200$, and $TiB_2$ was a product of SIGMA ALDRICH. The experiment was performed under the sunlight, Mass flow controller was used for constant flow to pass through the pyrex reactor which was fully charged with furnaced ceramics. The concentration of $NO_2$ gas passed through the pyrex reactor was measured by Multi Gas Monitor. The reaction took for 60 minutes, The material was exposed to sunlight for 40 minutes. The sunlight was interrupted before and after the exposure for 10 minutes. The result showed that the concentration of $NO_2$ gas of the ceramics with $TiB_2$ and without $TiB_2$ became reduced and then maintained the same concentration under the sunlight, and became increased when the sunlight is interrupted. The $NO_2$ removing efficiency of the ceramics mixed with $TiB_2$ was 14~43% higher than that of the ceramics without $TiB_2$ under the sunlight. The study showed that the removing rate of $NO_2$ was 80% when the mixture rate of Hwangto, Olivine, and $TiB_2$ was 68%, 30% and 2%.

• 유기물자원화
• /
• 제7권2호
• /
• pp.93-104
• /
• 1999

본 연구는 기존의 소멸화장치를 개선하여 에너지절감과 동시에 탈취효과를 극대화시키면서 유기물의 분해능력을 극대화시키는 장치를 개발하기 위하여 실시되었다. 기존의 장치와 비교하여 3차에 걸친 열교환을 통하여 백금촉매탑에서 발생하는 폐열을 회수하여 이용하게 하였으며, 배기가스의 65%정도를 재순환하게 하였다. 또한 장치전체에 대해서는 감압을 유지하게 하여 수분의 증발을 원활하게 하였다. 미생물제재에 의하여 반응을 안정적으로 유지하는 것이 가능했으며, 또한 분해매체제는 기존의 처리용량의 20배용적을 사용했으나, 본장치에서는 15배용적에 있어서도 미생물활성화가 가능하며, 호기성분위기를 효율적을 유지하는 것이 가능했다. 배기가스의 내부순환을 시스템을 사용함에 따라 얻어지는 효과에 대하여 검토한 결과, 내부의 악취물질인 암모니아가스농도를 감소시키는 것이 가능했으며, 탈취탑으로 유입되는 배기가스가 경감됨에 따라 전력비가1/3선으로 절감되는 효과가 확인되었다. 이러한 내순환에 따라 최적공기량은 100kg처리용량에 대하여 $0.44m^3$로, 이 공기량의 변화에 따라 전력비가 비례하여 변화하는 현상이 확인되었다.

• 대한교통학회지
• /
• 제32권6호
• /
• pp.694-702
• /
• 2014

국가 온실가스를 산정, 보고, 검정을 관장하는 온실가스종합정보센터가 2010년에 출범된 후, 주요 업무의 집합체인 국가 온실가스 인벤토리 보고서가 2012년부터 해마다 발간되었다. 보고서에는 부문별 온실가스 배출량 및 불확도가 보고되고 있지만, 대부분의 부문에서 불확도의 기입은 단순히 IPCC 가이드라인의 기본값으로 대체되고 있는 실정이다. IPCC 가이드라인은 부문별 온실가스 배출량을 산정함에 있어 Tier 수준에 따른 구체적인 산정식을 제시하고 있지만, 불확도의 경우 확률밀도함수 추정 또는 몬테카를로 방법 등을 적용한 국가고유 방법론의 개발을 권고하고 있다. 도로교통부문도 배출량이 Tier 1수준으로 산정되고 있지만 불확도는 보고되지 못하고 있는 실정이다. 본 연구는 도로교통부문에서 일반자가용자동차대형을 대상으로 활동자료인 연간 주행거리, 연비 그리고 배출계수를 이용하여 연간 배출량을 산정하는데 국한하지 않고 불확도 산정에 적용되는 여러 통계적 기법 중에 한 가지인 붓스트랩 및 몬테카를로 방법을 소개하는데 있다.

• 품질경영학회지
• /
• 제48권1호
• /
• pp.13-27
• /
• 2020

Purpose: The purpose of this study is to present a recoil measurement and analysis of K2 rifle for the development of a virtual reality marksmanship training in the Republic of Korea Army. Methods: For the recoil measurement, a test-bed is built by a barrel that has exact dimensions of K2 rifle and three piezoelectric pressure sensors mounted on the barrel. Data of over 200 rounds of 5.56mm M193 and K100 bullets are collected and analyzed from live fire experiments. For the recoil analysis, both the free recoil method and the gas exhaust aftereffect method are used to calculate a recoil velocity, momentum and kinetic energy of K2 rifle by applying the law of conservation of momentum. In addition, a new method is proposed that uses the third law of motion and the chamber pressure model for the recoil measurement Results: The results show how different between the previous and proposed methods with respect to M193 and K100 bullets of K2 rifle. In M193, the free recoil method demonstrates 1.113, 4.197, and 2.335, the gas exhaust aftereffect method computes 1.698, 6.407, and 5.441, and the proposed method calculates 0.990, 3.734, and 1.848 in recoil velocity, momentum and kinetic energy, respectively. In K100, the free recoil method demonstrates 1.190, 4.487, and 2.669, the gas exhaust aftereffect method computes 1.776, 6.699, and 5.949, and the proposed method calculates 1.060, 3.998, and 2.119 in recoil velocity, momentum and kinetic energy, respectively. Conclusion: This study implements live fire experiments to provide recoil velocity, momentum, and kinetic energy of K2 rifle using both M193 and K100 bullets. For the development of the army virtual reality marksmanship, the results in this paper would be useful to design and produce a gun and/or a rifle of virtual reality.

• 에너지공학
• /
• 제24권1호
• /
• pp.42-50
• /
• 2015

신형 원전의 피동격납건물냉각계통(PCCS: Passive Containment Cooling System)을 구성하는 단일 전열관의 열제거 성능을 평가하기 위해, 비응축성 기체 존재 시 수직 튜브 외벽에서 발생하는 증기의 응축 열전달에 대한 실험을 수행하였다. 외경 40 mm, 길이 1.0 m의 전열관 외벽에서 증기-공기 혼합물의 평균 열전달계수를 측정하였으며, 압력 2-4 bar, 공기의 질량분율 0.1-0.7의 범위에서 실험데이터를 수집하였다. 이를 통해 압력과 비응축성기체의 농도가 응축 열전달계수에 미치는 영향을 평가하였다. 실험결과를 기존의 열전달모델인 Uchida와 Dehbi의 상관식과 비교하였으며, 이들 상관식은 실험결과에 비해 상대적으로 열전달계수를 낮게 예측함을 확인하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.988-995
• /
• 2020

Air gun shock systems are commonly used as alternative explosion energy sources for underwater explosion (UNDEX) shock tests owing to their low cost and environmental impact. The airbag inflator of automotive airbag systems is also very useful to generate extremely rapid underwater gas release in labscale tests. To overcome the restrictions on the very small computational time step owing to the very fine fluid mesh around the nozzle hole in the explicit integration algorithm, and also the absence of a commercial solver and software for gas UNDEX of airbag inflator, an idealized airbag inflator and fluid mesh modeling technique was developed using nozzle holes of relatively large size and several small TNT charges instead of gas inside the airbag inflator. The objective of this study is to validate the results of an UNDEX response analysis of one and two idealized airbag inflators by comparison with the results of shock tests in a small water tank. This comparison was performed using the multi-material Arbitrary Lagrangian-Eulerian formulation and fluid-structure interaction algorithm. The number, size, vertical distance from the nozzle outlet, detonation velocity, and lighting times of small TNT charges were determined. Through mesh size convergence tests, the UNDEX response analysis and idealized airbag inflator modeling were validated.