• 한국군사과학기술학회지
• /
• 제14권6호
• /
• pp.1031-1036
• /
• 2011

In this paper, we have proposed a methodology which can test and evaluate on system level in development phase of command guided missile system. Test and evaluation play a significant role in the development of weapon system, providing the means for determining to what extent the weapon system satisfies its requirements, whether it functions normally in the operational environment. In case of command guided missile having seeker, the missile communications link provides data to allow the missile to fly an efficient trajectory toward target. Therefore, it is very important to test and evaluate for data link between missile and radar on whole system aspect. we introduce the concept and devices for system level test and evaluation of command guided missile system.

• 한국군사과학기술학회지
• /
• 제14권1호
• /
• pp.39-48
• /
• 2011

This study describes a range sensitivity of a canard controlled missile. An investigation was conducted into the relative importance of aerodynamic parameters on a guided missile. Also this study was analyzed by quantifying their effects on the missile range. To analyze the range sensitivity of a guided missile, a trajectory analysis program of a guided missile was developed. The range sensitivity analysis was conducted on a thrust, weight, drag and lift. The result of the range sensitivity analysis shows that the design parameters with the greatest effect on the missile range are thrust, drag, weight, and lift, in descending order of importance. The thrust on range extension is quite obvious to extend a range of a guided missile. In particular, the drag exhibited greater range sensitivity than lift at a guided flight. The result also shows that missile range could be maximized by applying the appropriate launch angle and canard pitch-up control.

• 한국정밀공학회지
• /
• 제33권10호
• /
• pp.781-787
• /
• 2016

We introduce FEST (Flight Environment Simulation Test) procedures for precise guided missiles to reliably improve systems. Flight vibration specification was established based on power spectral density curves calculated from flight test data of a high speed precise guided missile. A FEST pre-profile was developed according to flight vibration specification and delivered to a precise guided missile assembly. Vibration responses were measured by installing accelerometers on electronic components vulnerable to dynamic forces. The FEST profile was adjusted by comparing the vibration responses and the flight vibration specification. Subsequently, the FEST profile was repeatedly modified through trial and error, because the responses were similar to the flight environment. The modified FEST profile enabled performance testing of assembled precise guided missiles under simulated flight conditions on the ground, where unexpected errors could be corrected before the flight tests, leading to cost and risk reduction in the development of the precise guided missile system.

• 대한기계학회논문집A
• /
• 제23권11호
• /
• pp.1912-1921
• /
• 1999

The equipments mounted on guided-missile undertake heavy vibrational disturbance. Sometimes the equipments mounted on guided-missile go wrong so that the guided-missile flies over unintended place. For the vibration isolation of the equipments mounted on guided-missile, active vibration control was performed. In the case of active vibration technique, the stiffness matrix and the mass matrix are derived based on FEM (ANSYS5.0). Model reduction was carried out and, as a result, we got 7 DOF mass and stiffness matrix. For the sake of FEM model identification, modal experiment was carried out. With the help of Sensitivity Analysis, the natural frequencies of FEM were tuned to those of Experiment. In this work, the Sky Hook and the LQG control theory were adopted for v iteration control using stacked piezoactuator. Experiments were performed with changing excitation frequency from 10 Hz upto 200 Hz and we got frequency response function of guided-missile equipments. The magnitude of 3rd mode of guided-missile equipments is 8.6 % that of Uncontrolled in Skyhook controller and is 3.4 % that of uncontrolled in LQG controller.

• 한국군사과학기술학회지
• /
• 제13권1호
• /
• pp.91-98
• /
• 2010

At present, advanced countries are focusing on the study of Demilitarization Method of Conventional Ammunitions. In this paper, we will report the current trends of Demilitarization of Conventional and Guided Missile ammunitions, and present the efficient Demilitarization Methods of new development of Guided Missile ammunitions in Korea.

• 시스템엔지니어링학술지
• /
• 제16권1호
• /
• pp.9-17
• /
• 2020

Currently, Storage Reliability is analyzed when predicting the reliability of guided missile. However, Mission Reliability and Logistics Reliability should be analyzed according to the definition of reliability in MIL-STD-785B. Therefore, it is necessary to accurately predict the reliability of guided missile based on the definition of reliability. In this paper, we proposed improved the reliability procedure and model for guided missile based on which the definition of reliability considering the mission profile. The proposed model can calculate the final failure rate by applying the ratio of the dormant and storage according to the mission profile. The proposed model has been confirmed to be more accurate than the existing model compared to the actual failure rate value. The results of this study can be useful for applying the reliability prediction to any guided missile.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제17권2호
• /
• pp.83-91
• /
• 2017

Purpose: The purpose of this study is to develop a quality assurance model and to determine appropriate warranty period for a guided missile using its field data. Methods: 10 years of actual firing data is collected from the defense industry company and military. Parametric maximum likelihood estimation for a reliability function is determined with the data. Results: The reliability function estimates average lifetime of the missile. That function shows a user requirement, 80% reliability (lifetime) is come up when 8 years have passed, which is longer than the estimates in the missile's development phase. Conclusion: Quality assurance warranty for a guided missile must be established with actual test data. It is necessary to update and modify the reliability prediction and the warranty period with actual field test data.

• 한국항행학회논문지
• /
• 제27권4호
• /
• pp.453-456
• /
• 2023

전투기는 적의 공대공 위협에 대응하기 위해 탐색기(seeker)가 탑재된 유도탄을 운용한다. 단거리 유도탄(SRM; short range missile)은 주로 IR 탐색기를 탑재하고 시계 거리 밖의 표적에 대응하는 중거리 유도탄(MRM; medium range missile)은 대개 RF 탐색기를 장착한다. 중거리 유도탄은 발사되더라도 탐색기의 탐지범위에 도달할 때까지 탐식기가 작동하지 않으며 항공기에 탑재된 레이다로 중거리 유도탄을 일정 거리만큼 유도해야 한다. 이런 유도 방식을 MDL (missile data link)이라 하며, 유도탄의 통신 방식에 따라 단방향 방식과 양방향 방식이 있다. 본 논문에서는 이 두 가지 통신 방식에 따른 MDL과 이를 위한 레이다, 임무컴퓨터 및 유도탄 간의 연동에 대해 논하고자 한다.

• 한국멀티미디어학회논문지
• /
• 제23권8호
• /
• pp.1066-1074
• /
• 2020

High Level Architecture/Run-Time Infrastructure (HLA/RTI) is used to connect individual simulators on networks in order to interoperate heterogeneous simulators. In defense domain, Ship Air Defense Model (SADM) and Extended Air Defense Simulation (EADSIM) are two of most advanced simulation tools. To interoperate these SADM and EADSIM, this paper attempts to use HLA/RTI that helps to support a Composite Combat Mission Planning Simulation Environment (CCMPSE). The CCMPSE allows us to analyze a group of simulations for comprehensive and accurate experiments. For the first time, this paper analyzes guided missile simulations in EADSIM and SADM by comparing related simulation models in their parameters and considerations. It presents characteristics of these models in view of guided missile simulation perspectives. For the contributions of this paper, it provides insights to select guided missiles between SADM and EADSIM on the CCMPSE according to specific simulation purposes.

• 한국항행학회논문지
• /
• 제25권5호
• /
• pp.313-319
• /
• 2021

본 논문에서는 MIL-HDBK-344A 기반의 ESS(environmental stress screening) 시험 에 대해 소개하고, 유도탄 내부 케이블의 ESS 시험에 대한 목적과 규격 설정 및 시험 방안에 대하여 확인하였다. ESS 시험구성은 온도 순환과 랜덤 진동의 환경 자극으로 이루어져 있으며, 핸드북의 절차를 기반으로 유도탄 내부 케이블의 ESS 시험 규격 설정과 시험 구성을 제시하고, 진동 시험을 위한 유도탄 내부 케이블의 ESS 시험을 위한 치구를 제작하였다. 스크린 강도(SS; screening strength)를 통해 결정되는 결함 감지 확률은 일회성으로 사용되는 유도탄의 신뢰성에 부합되도록 선정하였고, 또한 ESS 시험 중 유도탄 내부 케이블의 검사방법과 고려해야 할 점에 대하여 소개하였다.