• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.131-134
• /
• 2005

This paper presents a computer-aided simulation and robotic-assisted execution technology of external fixation method to achieve fracture reduction and deformity correction in long bones. Combining the kinematic analysis with a graphic model of the tibia and the fixator allowed 3D simulation and visualization of the adjustments required to reduce fracture or correct bone deformity as a pre-operative planning tool. The developed robot model provided accurate deformity correction with small residual deformity based on the results of the planning. By incorporating the robot model with image-guided system and computer-aided planning, the integrated system could be useful for computer-aided pre-operative planning and robotic-assisted execution in fracture treatment and bone deformity surgery.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.643-648
• /
• 1989

This paper presents a theoretic study and computer simulation of models and approaches for dynamical obstacle avoidance by mobile robots. The movement of obstacles in unknown environment is described by any one or a combination of three models. The control strategy of the mobile robots is formulated based on one of three approaches. A trajectory-guided control strategy for dynamical obstacle avoidance has been developed. The method greatly simplifies the control process of mobile robots, and is computationally attractive.

• 한국CDE학회논문집
• /
• 제20권3호
• /
• pp.263-268
• /
• 2015

Due to an increased sitting time in work, lumbar disc disease is one of the most frequent diseases in modern days, and this occasionally requires surgery for treatment. Endoscopic disc surgery, one of the common disc surgeries, requires a process of inserting a guide needle to the target disc for which the insertion path is manually planned by drawing lines on the patient's skin while monitoring the fluoroscopic view of the lumbar. Such procedure inevitably exposes both surgeon and patient to the fluoroscopy radiation emitted from the c-arm for a long time. To reduce the radiation exposure time, this study proposes a computer assisted method of calculating the 3D guide needle path by using 2D c-arm images of the disc in 3 different angles. Additionally, a method of the guide robot control based on the 3D needle path was developed by implementing the Hand-eye Calibration method to calculate the transformation matrix between the c-arm and robot base coordinate systems. The proposed system was then tested for its accuracy.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제15권4호
• /
• pp.305-314
• /
• 2015

The work presented in this paper deals with a navigation problem for multiple mobile robot system in unknown indoor environments. The environment is completely unknown for all the robots and the surrounding information should be detected by the proximity sensors installed on the robots' bodies. In order to guide all the robots to move along collision-free paths and reach the goal positions, a navigation method based on the combination of a set of primary strategies has been developed. The indoor environments usually contain convex and concave obstacles. In this work, a danger judgment strategy in accordance with the sensors' data is used for avoiding small convex obstacles or moving objects which include both dynamic obstacles and other robots. For big convex obstacles or concave ones, a wall following strategy is designed for dealing with these special situations. In this paper, a state memorizing strategy is also proposed for the "infinite repetition" or "dead cycle" situations. Finally, when there is no collision risk, the robots will be guided towards the targets according to a target positioning strategy. Most of these strategies are achieved by the means of fuzzy logic controllers and uniformly applied for every robot. The simulation experiments verified that the proposed method has a positive effectiveness for the navigation problem.

• International Journal of Automotive Technology
• /
• 제6권5호
• /
• pp.545-554
• /
• 2005

Passive velocity field control (PVFC) was previously developed for fully mechanical systems, in which the motion task was specified by behaviors in terms of a velocity field and the closed-loop was passive with respect to the supply rate given by the environment input. However, the PVFC was only applied to a single manipulator. The proposed control law was derived geometrically and the geometric and robustness properties of the closed-loop system were also analyzed. In this paper, we propose a virtual passivity-based algorithm to apply decentralized control to multiple 3­wheeled mobile robotic systems whose subsystems are under nonholonomic constraints and convey a common rigid object in a horizontal plain. Moreover, it is shown that multiple robot systems ensure stability and the velocities of augmented systems converge to a scaled multiple of each desired velocity field for cooperative mobile robot systems. Finally, the application of proposed virtual passivity-based decentralized algorithm via system augmentation is applied to trace a circle and the simulation results is presented in order to show effectiveness for the decentralized control algorithm proposed in this research.

• 대한기계학회논문집A
• /
• 제34권11호
• /
• pp.1741-1747
• /
• 2010

본 연구에서는 원격 조정 매니퓰레이터에 적용할 수 있는 보급형 서비스 로봇 암을 개발하였다. 생체 모방학을 활용하여 새로운 형태의 로봇 손에 대한 개념을 도출하였다. 손가락과 손목은 인체 팔의 근골격에 분석을 통하여 상박에 설치된 와이어와 액추에이터에 의하여 구동된다. DC 모터에 의해 구동되는 스크류-너트 매커니즘을 통하여 구동 케이블에 높은 장력을 발생시킨다. 파지력의 쉬운 제어를 위하여 스크류-너트 메커니즘에 조합 스프링을 적용하였다. 첫 번째 설계에서 손가락 제어 문제, 손가락과 손목 운동의 간섭 문제가 발견되었다. 트리즈의 모순 분석을 통하여 이러한 문제에 대한 해결안을 도출하였다. 두 번째 설계에 대하여 다양한 형태와 무게의 물체에 관하여 파지와 동작 테스트를 시행하였다.

• 한국컴퓨터정보학회논문지
• /
• 제27권2호
• /
• pp.9-14
• /
• 2022

본 연구에서는 유연성을 가지는 공기 조형물과 같은 기구물이 사용자가 원하는 자세를 안정적으로 유지하며 이동하기 위한 방안을 제안한다. 이를 수행하기 위해 IMU를 이용한 수평 유지 자세 제어와 PI 알고리즘을 적용하여 주어진 궤적에 따라 주행이 가능한 이동로봇의 구조를 가지는 로봇 시스템을 연구하였다. 본 연구에서 사용된 공기 조형물은 고정된 자세로 얇은 끈을 이용하는 경우가 많다. 다른 방법으로는 무게 중심부에 하중을 실어 자세를 유지며 공기의 압력을 사용하므로 유연성을 가지는 시스템이다. 이러한 구조물은 디지털 센서 기술의 융합과정을 통해 유연한 형태의 구조물과 이동로봇의 결합으로 다양한 성과를 얻을 수 있을 것으로 기대한다. 본 연구는 로봇의 한 분야인 AGV(무인 반송차)의 주행 기술과 다양한 센서를 응용한 기술들을 융합하여 자세제어를 수행하였다. 검증은 공인인증시험을 통해 주어진 성능 평가를 수행하였으며 실험을 통해 그 타당성을 검증하였다.

• 제어로봇시스템학회논문지
• /
• 제21권1호
• /
• pp.65-69
• /
• 2015

A vision-based blank alignment unit for a press automation line is introduced in this paper. A press is a machine tool that changes the shape of a blank by applying pressure and is widely used in industries requiring mass production. In traditional press automation lines, a mechanical centering unit, which consists of guides and ball bearings, is employed to align a blank before a robot inserts it into the press. However it can only align limited sized and shaped of blanks. Moreover it cannot be applied to a process where more than two blanks are simultaneously inserted. To overcome these problems, we developed a press centering unit by means of vision sensors for press automation lines. The specification of the vision system is determined by considering information of the blank and the required accuracy. A vision application S/W with pattern recognition, camera calibration and monitoring functions is designed to successfully detect multiple blanks. Through real experiments with an industrial robot, we validated that the proposed system was able to align various sizes and shapes of blanks, and successfully detect more than two blanks which were simultaneously inserted.

• 한국기계가공학회지
• /
• 제16권4호
• /
• pp.113-118
• /
• 2017

As the demand for industrial robots and Automated Guided Vehicles (AGVs) increases, higher performance is also required from them. Fuzzy controllers, as part of an intelligent control system, are a direct control method that leverages human knowledge and experience to easily control highly nonlinear, uncertain, and complex systems. This paper uses a $LabVIEW^{(R)}-based$ fuzzy controller with gain scheduling to demonstrate better performance than one could obtain with a fuzzy controller alone. First, the work area was set based on forward kinematics and inverse kinematics programs. Next, $LabVIEW^{(R)}$ was used to configure the fuzzy controller and perform the gain scheduling. Finally, the proposed fuzzy gain scheduling controller was compared with to controllers without gain scheduling.

• 한국의학물리학회지:의학물리
• /
• 제27권3호
• /
• pp.117-124
• /
• 2016

Intrafractional motion of patients, such as respiratory motion during radiation treatment, is an important issue in image-guided radiotherapy. The accuracy of the radiation treatment decreases as the motion range increases. We developed a control system for a robotic patient immobilization system that enables to reduce the range of tumor motion by compensating the tumor motion. Fusion technology, combining robotics and mechatronics, was developed and applied in this study. First, a small-sized prototype was established for use with an industrial miniature robot. The patient immobilization system consisted of an optical tracking system, a robotic couch, a robot controller, and a control program for managing the system components. A multi speed and position control mechanism with three degrees of freedom was designed. The parameters for operating the control system, such as the coordinate transformation parameters and calibration parameters, were measured and evaluated for a prototype device. After developing the control system using the prototype device, a feasibility test on a full-scale patient immobilization system was performed, using a large industrial robot and couch. The performances of both the prototype device and the realistic device were evaluated using a respiratory motion phantom, for several patterns of respiratory motion. For all patterns of motion, the root mean squared error of the corresponding detected motion trajectories were reduced by more than 40%. The proposed system improves the accuracy of the radiation dose delivered to the target and reduces the unwanted irradiation of normal tissue.