• 제목/요약/키워드: Guided

검색결과 3,972건 처리시간 0.029초

배열 탐촉자를 사용한 유도초음파의 모드선정 기법 (Dynamic Mode Tuning of Ultrasonic Guided Wave Using an Array Transducer)

  • 김영환;송성진;박준수;김재희;엄흥섭
    • 비파괴검사학회지
    • /
    • 제25권1호
    • /
    • pp.20-26
    • /
    • 2005
  • 유도초음파는 판, 봉 또는 관과 같은 구조물의 장거리 탐상에 사용되고 있다. 그러나, 유도초음파에는 그 모드가 많고 전파속도가 달라서, 원하는 모드를 선택적으로 발생시키고 수신하는 기법이 유도초음파를 응용하는데 핵심적인 기술 중 하나이다. 본 연구에서는 배열형 탐촉자의 위상을 조절하여 유도초음파를 발생시키는 방법에 대하여 연구하였다. 이를 위하여 8채널 초음파 펄서/리시버, 그리고 각각의 채널을 일정한 시간간격으로 구동할 수 있는 회로를 개발하였다. 8개의 탐촉자를 만들어서 배열형으로 사용하여 유도 초음파를 발생시켰다. 이웃한 요소 탐촉자 사이의 구동시간 간격을 제어하여 이에 맞는 위상속도를 지닌 유도초음파를 선택적으로 발생시켰고, 발생된 유도초음파의 군속도를 측정하였으며, 배열탐촉자에서 수신된 신호를 시간지연을 가지고 합성하여 유도초음파의 모드를 선택적으로 수신하였다. 그 결과, 이웃한 요소 탐촉자 사이의 구동시간 간격을 바꿈으로서 원하는 모드의 유도초음파를 선택적으로 발생시킬 수 있었다.

Piezo-activated guided wave propagation and interaction with damage in tubular structures

  • Lu, Ye;Ye, Lin;Wang, Dong;Zhou, Limin;Cheng, Li
    • Smart Structures and Systems
    • /
    • 제6권7호
    • /
    • pp.835-849
    • /
    • 2010
  • This study investigated propagation characteristics of piezo-activated guided waves in an aluminium rectangular-section tube for the purpose of damage identification. Changes in propagating velocity and amplitude of the first wave packet in acquired signals were observed in the frequency range from 50 to 250 kHz. The difference in guided wave propagation between rectangular- and circular-section tubes was examined using finite element simulation, demonstrating a great challenge in interpretation of guided wave signals in rectangular-section tubes. An active sensor network, consisting of nine PZT elements bonded on different surfaces of the tube, was configured to collect the wave signals scattered from through-thickness holes of different diameters. It was found that guided waves were capable of propagating across the sharp tube curvatures while retaining sensitivity to damage, even that not located on the surfaces where actuators/sensors were attached. Signal correlation between the intact and damaged structures was evaluated with the assistance of a concept of digital damage fingerprints (DDFs). The probability of the presence of damage on the unfolded tube surface was thus obtained, by which means the position of damage was identified with good accuracy.

테트라싸이클린 함유 차폐막을 이용한 골조직 유도 재생에 관한 연구 (Effects of Tetracycline-loaded Poly(L-lactide) Barrier Membranes on Guided Bone Regeneration in Beagle Dog)

  • 최광수;김탁;양대승;김은철;유형근;신형식
    • Journal of Periodontal and Implant Science
    • /
    • 제31권2호
    • /
    • pp.299-315
    • /
    • 2001
  • Application of membranes for guided tissue regeneration(GTR) have been confined to the subgingival barrier functions; however, many studies have provided evidence that some drugs, including tetracycline, initially can promote the growth of periodontal ligament or alveolar bone in peridontal therapy. Osseous regeneration in periodontal defects is increased by local administration of tetracycline due to its anti-collagenolytic effect, which enhances bone-forming ability via osteoblast cell chemotaxis and reduced bone resorption. The aim of this study was to evaluate effects of tetracycline loaded poly-L-lactide(PLLA) barrier membranes for guided bone regenerative potential. Tetracycline was incorporated into the PLLA membrane with the ratio 10% to PLLA by weight. Ability to guided bone regeneration of the membranes were tested by measuring new bone in the tibial defects($7{\times}10{\times}5\;mm^3$) of the beagle dog for 4,5, and 6 weeks. In control, drug-unloaded PLLA membranes were used in same size of defect. In histologic finding of the defect area, a few inflammatory cells were observed in both groups. These membrane were not perforated by connective tissue and maintained their mechanical integrity for the barrier function for 4-6 weeks. New bone formation was greater in defects covered by tetracycline-loaded membrane than in defects covered by drug- unloaded membranes. In bone regeneration guiding potential test, tetracycline-loaded membrane was more effective than drug- unloaded membranes(p<0.05). These results suggest that tetracycline-loaded PLLA membranes potentially enhance guided bone regenerative efficacy and might be a useful barrier for GTR in periodontal treatment.

  • PDF

배관 진단을 위한 배열형 유도초음파 검사시스템 개발 (A Development of an Array Guided Wave Ultrasonic Testing System for pipe inspection)

  • 조현준;이동훈;강토;박진호;한성진
    • 한국가스학회지
    • /
    • 제19권5호
    • /
    • pp.29-35
    • /
    • 2015
  • 국내 에너지, 석유화학 산업분야에서 주로 사용되는 배관은 다양한 요인에 의해 발생하는 결함들에 대한 검출과 평가가 상시적으로 이슈화되곤 한다. 에너지와 석유화학 배관은 특성상 비교적 긴 거리에 걸쳐 시공되는 경우가 많고 다양한 부위에 여러 형태의 결함이 존재하게 되는데, 본 연구를 통해 국내 배관에 주로 발생하는 보온재 아래의 부식을 보다 효율적으로 검출하기 위한 방법으로 유도초음파 검사기법을 활용하는 시스템과 신호개선방법을 개발했다. 배관 내 결함의 검출능을 높일 수 있는 수단으로 초음파 탐촉자를 배열화하여 유도초음파를 발생시키고 신호대잡음비를 개선할 목적으로 송신 집속기법이 가능하도록 했다. 본 논문에서는 배열 유도초음파 검사시스템의 개발과 송신 집속을 통한 신호대잡음비 개선에 관해 기술한다.

원전 기기 건전성의 온라인 검사를 위한 유도 초음파의 실험적 연구 (Experimental Studies on Ultrasonic Guided Waves for the On-Line Inspection of Structural Integrity of Nuclear Power Plants)

  • 엄흥섭;김재희;송성진;김영환
    • 비파괴검사학회지
    • /
    • 제24권4호
    • /
    • pp.331-340
    • /
    • 2004
  • 기기 건전성의 온라인 검사 및 감시 기술은 기존의 원전의 가동 중 검사의 효율적 수행에 필요한 정보를 제공한다. 유도 초음파는 온라인 검사와 감시에 활용 가능성이 있는 기술 중의 하나로 알려져 있다. 본 연구에서는 온라인 검사 겐 감시 기술 개발의 일환으로 유도초음파를 이용하여 파이프의 건전성을 검사/감시하는 기술을 개발하고자 한다. 이를 위해 증기 발생기 세관을 실험 대상으로 하여 분산 선도 덴 특정 모드에 대응하는 초음파 입사각을 계산하였다. Short time Fourier transform을 이용한 시긴-주파수 분석을 통하여 유도초음파 모드를 확인하였으며, 유도 초음파가 증기발생기 세관의 곡관 부분을 통과할 때 모드 변환이 발생하지 않는 것을 실험적으로 확인하였다. 유도 초음파를 이용한 증기발생기 세관의 최적 검사 모드를 제안하고 실험에 의하여 이를 확인하였다.

Air-coupled 트런스듀서를 이용한 발전설비 배관에서의 유도초음파 모드 규명 (Identification of Guided-Wave Modes in Pipings of Power Plants by using Air-coupled Transducer)

  • 박익근;김현묵;김용권;송원준;조용상;장경영;조윤호
    • 비파괴검사학회지
    • /
    • 제24권4호
    • /
    • pp.341-347
    • /
    • 2004
  • 발전설비의 중요한 요소인 배관의 효율적인 비파괴검사를 위해, 배관내에 유도초음파를 comb 트랜스듀서를 이용하여 발생시켰으며, 유도초음파를 비접촉 방식으로 수신하기 위해 An(air-coupled transducer)를 적용하였다. comb 트랜스듀서의 요소간격과 이론적인 분산선도로부터 발생가능 한 유도초음파 모드가 예측되었다. 또한 예측된 모드를 수신하기 위해 각 모드의 이론적인 위상속도를 이용하여 ACT의 수신 각도를 결정하였다. 수신모드의 특성을 규명하기 위해 웨이블릿 변환과 2D-FFT를 이용한 시간-주파수해석을 수행하여 이론적인 분산선도와 비교한 결과, 수신된 보드는 이론적으로 예측된 모드와 일치하는 것으로 나타났다.

MIL-HDBK-344A 기반의 유도탄 내부 케이블 ESS 시험 방안 (Test Method for Guided Missile Cable ESS(Environmental Stress Screening) Based on MIL-HDBK-344A)

  • 이대현;이정민;오택근;이홍범;정준영
    • 한국항행학회논문지
    • /
    • 제25권5호
    • /
    • pp.313-319
    • /
    • 2021
  • 본 논문에서는 MIL-HDBK-344A 기반의 ESS(environmental stress screening) 시험 에 대해 소개하고, 유도탄 내부 케이블의 ESS 시험에 대한 목적과 규격 설정 및 시험 방안에 대하여 확인하였다. ESS 시험구성은 온도 순환과 랜덤 진동의 환경 자극으로 이루어져 있으며, 핸드북의 절차를 기반으로 유도탄 내부 케이블의 ESS 시험 규격 설정과 시험 구성을 제시하고, 진동 시험을 위한 유도탄 내부 케이블의 ESS 시험을 위한 치구를 제작하였다. 스크린 강도(SS; screening strength)를 통해 결정되는 결함 감지 확률은 일회성으로 사용되는 유도탄의 신뢰성에 부합되도록 선정하였고, 또한 ESS 시험 중 유도탄 내부 케이블의 검사방법과 고려해야 할 점에 대하여 소개하였다.

Computer guided implant surgery와 CAD/CAM을 활용한 전악 수복 증례 (Full mouth rehabilitation utilizing computer guided implant surgery and CAD/CAM)

  • 김성진;한중석;김성훈;윤형인;여인성
    • 대한치과보철학회지
    • /
    • 제57권1호
    • /
    • pp.57-65
    • /
    • 2019
  • Computer guided implant surgery와 computer-aided design/computer-aided manufacturing, computer guided implant surgery (CAD/CAM) 기술의 발전은 수복 기반 임플란트 치료의 완성도를 한층 더 높였으며, 3D printing을 통한 국소의치의 제작도 빈도가 늘고 있다. 본 증례는 디지털 치의학의 작업 흐름을 따라서 콘빔컴퓨터단층촬영을 통한 치료 계획 수립 및 수술용 스텐트의 제작과 그를 바탕으로 한 임플란트 식립을 하였으며, 맞춤 지대주와 보철물을 제작하였다. 그 후 전자 서베잉과 3D printing을 통한 국소의치 금속 구조물 및 최종적으로 지르코니아 온레이의 제작을 통해 전악 수복을 완성하여 기능과 심미적으로 만족스러운 결과를 얻을 수 있었다.

Clinical and radiological outcomes of ultrasound-guided barbotage using a spinal needle and subacromial steroid injection for calcific tendinitis of the shoulder

  • Lee, Jun Pyo;Kim, Doo Sup;Han, Jin Young;Baik, Seung Hoon;Kwak, Ji Woong;Kim, Sung Hwa
    • Clinics in Shoulder and Elbow
    • /
    • 제25권2호
    • /
    • pp.140-144
    • /
    • 2022
  • Background: Ultrasound (US)-guided techniques reported for the treatment of calcific tendinitis have mostly demonstrated good results. This study investigates the effect of US-guided barbotage using a spinal needle in patients with calcific tendinitis of the shoulder. Methods: Thirty-six patients with calcific tendinitis of the shoulder treated by US-guided barbotage with a spinal needle and subacromial steroid injection were included in the study. We evaluated clinical outcomes based on American Shoulder and Elbow Surgeons (ASES) score, Constant score, and visual analog scale (VAS) for pain score. Radiological outcomes were assessed by X-ray imaging at each visit. Results: Our results showed that US-guided barbotage and subacromial steroid injection produced good clinical and radiological outcomes in patients with calcific tendinitis of the shoulder. Of the 36 patients, only one required surgical treatment, while the others showed improvement without any complications. Compared to values before the procedure, calcific deposit size and VAS, ASES, and Constant scores showed significant improvement 6 weeks after the procedure. No significant correlation was found between the initial calcific deposit size and clinical outcomes at each time point. Conclusions: In patients with calcific tendinitis of the shoulder, US-guided barbotage using a spinal needle and subacromial steroid injection can yield satisfactory clinical and radiological results.

Puncture needle with a hard plastic sheath and plastic wings minimizes repuncture attempts in ultrasound-guided paracentesis: a retrospective case-control study

  • Son, Il Wan;Kim, Suk;Hong, Seung Baek;Lee, Nam Kyung;Jeong, Mi Ri;Han, Sung Yong;Woo, Hyun Young
    • Journal of Yeungnam Medical Science
    • /
    • 제39권1호
    • /
    • pp.18-23
    • /
    • 2022
  • Background: This study was performed to evaluate periprocedural factors, complications, and repuncture rate of the newly developed puncture needle and compare it with the routinely used puncture needle for ultrasound (US)-guided paracentesis. Methods: We retrospectively identified 137 patients who underwent US-guided paracentesis between July 2018 and March 2019. Among them, 82 patients underwent US-guided paracentesis with a newly developed puncture needle. The other 55 patients underwent US-guided paracentesis with a routinely used puncture needle. The periprocedural factors, complications, and repuncture rate were compared between the two groups using the Mann-Whitney U test and Fisher exact test. The repuncture-associated factors were assessed using logistic regression analysis. Results: There were no major or minor complications in either group. The rate of repuncture was significantly lower in the group using the newly developed puncture needle compared with the group using the routinely used puncture needle (p=0.01). The duration of the procedure was significantly shorter with the newly developed puncture needle compared with the routinely used puncture needle (p=0.01). In univariate analysis, the thickness of the abdominal wall (p=0.04) and the use of the newly developed puncture needle (p=0.01) were significantly associated with the rate of repuncture. In multivariate analysis, only the use of the newly developed puncture needle was significantly associated with the rate of repuncture. Conclusion: Using this novel puncture needle with a hard plastic sheath and plastic wings, the rate of repuncture and the duration of the procedure were decreased without complications of US-guided paracentesis.