• 한국자동차공학회논문집
• /
• 제18권5호
• /
• pp.56-61
• /
• 2010

This paper presents dynamic clearance verification considering engine movement for vehicle engine room package and validates through physical vehicle test. Traditionally, static clearance guide has been used for engine room package, but it's only 2-dimension criteria that results in requiring unnecessary space and it's not possible to conduct engine movement with real driving conditions. Thus, the dynamic DMU considers engine movement based on 28 load cases that are Roll Data analyzed by CAE for maximum engine movement and visualizes part-to-part dynamic clearance into virtual space. The dynamic DMU enables to develop compact engine room package without unnecessary space. The result of comparison between simulation and physical test has 0.892 correlation coefficient.

• 한국정밀공학회지
• /
• 제26권2호
• /
• pp.71-77
• /
• 2009

In the automotive industry, aluminum is widely used to reduce the vehicle weight. Aluminum curved extruded components are used for the design of frame parts. This study investigates the curvature extrusion process to produce the aluminum curved suspension arm. In the curvature extrusion process, the bending process is simultaneously carried out with the extrusion process. Firstly, porthole extrusion was investigated by using FE analysis to produce aluminum suspension arm. And then the bending process condition was determined to produce the final suspension arm with the required curvature. In this research, the guide roll movement causes the bending of extruded product. The moving distance and velocity of guide roll were controlled to meet the required curvature of suspension arm. Finally, the curved suspension arm was manufactured by the curvature extrusion experiment under the proposed curvature extrusion condition.

• 한국생산제조학회지
• /
• 제19권6호
• /
• pp.867-874
• /
• 2010

RFID printing technology has emerged recently as an important tool for leading future IT. Therefore, many manufacturers concerning on low cost and mass production of the related products pay close attention to the printing technology. In order to realize printed electronics, the technologies for fine line-width/gap printing and registration are essential work. This study proposes a precise Roll to Roll control system that is capable of tilting two posts. Two controllable tilting posts can adjust film position at traverse direction for the precision registration. A mathematical model for representing the geometric features of each posts in Roll to Roll printing system is established first. Then an operating program is built to implement the system and to control film movement. For experimental test, a hard ware system is fabricated which is consisted of two AC servo motors, two posts tilting mechanisms, several guide rolls, and so on. The test results show the proposed system can control the film position precisely at transverse direction.

• 대한방사선치료학회지
• /
• 제29권1호
• /
• pp.7-18
• /
• 2017

목 적: 영상유도를 통한 6DoF Couch의 이동 정확성의 검증을 위해 QA Set을 제작하였고, 그 유용성을 평가하였다. 대상 및 방법: 6DoF Couch와 CBCT가 설치된 두 대의 선형가속기를 대상으로 하였으며, 자체 제작한 YCC QA Set을 이용하여 수평수직(Translation; TX, TY, TZ)과 회전(Rotation, Pitch; RX, Roll; RY, Yaw; RZ) 여섯방향의 Off-Set 값이 설정된 Penta-Guide Phantom의 CBCT영상을 각각 15회에 걸쳐 획득하였다. 이를 통해 기준영상(Reference Image)과 보정영상(Registration Image)을 비교하였으며, 보정된 6DoF Couch의 이동정확성을 실측하여 오차를 분석하였다. 결 과: 기준영상과 보정영상의 Air Cavity에 해당하는 Pixel들은 모두 30에서 66 사이에 포함되어 보정정확도가 높게 나타났다. 6DoF Couch의 Off-set의 보정 결과 값과 실측치의 비교에서 수평수직방향의 오차는 TX방향은 $0.25{\pm}.18mm$ TY방향은 $0.25{\pm}.25mm$ TZ방향에서 $0.36{\pm}.2mm$로 나타났다. 그리고 회전방향의 오차는 RX방향은 $0.18{\pm}.08^{\circ}$ RY방향은 $0.26{\pm}.09^{\circ}$ RZ방향에서 $0.11{\pm}.08^{\circ}$로서, 임의의 값에 대하여 정확하게 보정되었다. 결 론: YCC QA Set을 이용해 매우 간단한 방법으로 6DoF Couch의 수평수직방향뿐 아니라 회전방향의 오차에 대한 검증을 할 수 있었으며, 이는 6DoF Couch의 Daily IGRT QA를 수행함에 있어서 유용할 것이라 사료된다.