• Journal of the Korean Ceramic Society
• /
• v.39 no.1
• /
• pp.21-25
• /
• 2002

Effect of abnormal grain growth and heat treatment time on the electrical properties of donor-doped semiconductive BaTiO$_3$ceramics was examined. La-doped BaTiO$_3$ceramics was sintered at 134$0^{\circ}C$ for different times from 10 to 600 min in order to change the volume fraction of the abnormal grains in samples. As a result, samples with different volume fraction of abnormal grain growth from 22 to 100% were prepared. The samples were annealed at 120$0^{\circ}C$ for various times. The resistivity of the sam-ples at room and above Curie temperature was examined. The complex impedance measurement as functions of the volume fraction of abnormal grains and annealing time was conducted. Separation of complex impedance semicircle was observed in a sample in which abnormal and fine grains coexist. The results are discussed from a viewpoint of microstructure-property relationship.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.2
• /
• pp.134-138
• /
• 2000

Most parts of alfalfa plant have been reported to contain autotoxic substances that inhibit seed germination and early seedling growth, however, the chemical(s) is not still studied much. Effect of seed leachates of 'Vernal' alfalfa (Medicago sativa L.) was evaluated for inhibition of alfalfa germination and root growth through bioassay. Alfalfa seeds were extracted in 1 L deionized water for 1 h after soaking and the leachates caused to reduce root length of alfalfa significantly as the soaking time increased. Crude seeds at 4 g L$L^{-1}$ exudated autotoxins that reduce significantly root length by 34 % compared to the control, when the seeds soaked in deionized water for 24 h. However, the extracts did not affect final germination as well as speed of germination. Extracts from ground seeds significantly reduced speed of germination (GT 50) and root length. The results indicate that release of autotoxic substances from seeds during seed imbibition was increased with increase of soaking time and seed amount, and that autotoxicity was more occurred in ground seeds than in crude seeds.

• Bulletin of the Korean Mathematical Society
• /
• v.54 no.6
• /
• pp.2065-2079
• /
• 2017

This paper is devoted to the minimal and maximal bounded solutions for general time interval quadratic backward stochastic differential equations with stochastic conditions. A general existence result is established by the method of convolution, the exponential transform, Girsanov's transform and a priori estimates, where the terminal time is allowed to be finite or infinite, and the generator g is allowed to have a stochastic semi-linear growth and a general growth in y, and a quadratic growth in z. This improves some existing results at some extent. Some new ideas and techniques are also applied to prove it.

• The Journal of Korean Physical Therapy
• /
• v.6 no.1
• /
• pp.109-119
• /
• 1994

The study was carried out to investigate the change of bacterial growth in vitro according to polarity, current intensity and time, to prepare the basic data for electrotherapy and clinical research. The Gram positive Staphylococcus aureus and Gram negative Escherichia coli 1mm infect wound were cultured in Trypticase Soy Brath and Trypticase Soy Agar. The results were as followings. 1. The current stimulated group was changed in bacterial growth according to polarity, current intensity and time respectively. 2. The bacteriolytic effect revealed in the anode but the inhibitory effect of bacterial growth revealed in the cathode. 3. The lumber of E. coli reduced after 6-hours but the numbers of S. aureus reduced after 2 hours in Trypticase Soy Brath. 4. The anode showed acid reaction and cathode showed alkaline reaction in Trypticase Soy Agar.

• Journal of the Korean Vacuum Society
• /
• v.8 no.3B
• /
• pp.327-332
• /
• 1999

High speed real-time spectroscopic ellipsometry was employed in order to characterize the growth of chromium thin film. This instrument can collect 512 points of {$\Delta$(hv), $\Psi$(hv)} spectra from 1.3 to 4.5 eV with acquisition and repetition rates of 20 msec or less. When this instrument was integrated into the chromium thin film growth, we could obtain not only the information on film properties but also the details of the processes. We deduced the growth rates and the evolution of the optical properties of chromium thin films under several preparation conditions. We also demonstrated the contamination process of chromium thin films caused by air exposure.

• The Journal of the Korean dental association
• /
• v.22 no.12 s.187
• /
• pp.1067-1073
• /
• 1984

In the treatment of functional orthodontic problems, timing is not an issue. All orthodontists start as soon as the condition is recognized. However, there is an active dialogue concerning treatment timing for structure problems. The major points in contention center around the operator's ability is to control the growth of the facial bones and to maintain post-treatment tooth position through the maturation period (especially when this position was gained by techniques involving arch expansion or distal driving of posterior segments). Factors taken into account to determine the best time of orthodontic treatment include diagnosis, interception, growth rate, patient cooperation, eruptive state and treatment period. With those exceptions of all functional problems, mild dental discrepancies and skeletal deficiencies with a predictably excellent growth potential (early treatment), the period immediately following the eruption of the permanent second molars is the period during which most orthodontic treatment should be initiated. At this time the full volume of tooth substances is present, the individual growth pattern in well established, there are sufficient teeth to receive nearly any type of appliances and the patient can easily tolerate the wearing of appliances.

• The Journal of Korean Physical Therapy
• /
• v.12 no.3
• /
• pp.311-317
• /
• 2000

The puroose of the study was carried out to investigate the change of bacterial growth in vitro according to intensities and exposure time. to basic data far ultrasound and clinical research. The Staphylococcus aureus which are commonly isolated from open wound were incubated in an incubator for 24 hours following expoure 1MHz continuous ultrasound(CUS). Then quantitative bacterial counts were obtained. The results were as following. 1. The groups CUS was appied changed in bacterial growth according to intensities and time respectively. 2. The groups CUS was appied showed the inhibitory effect of bacterial growth. 3. The number of S. aureus significantly reduced to fellowing expoure $3.0w/cm^2$ CUS during 20min.

• Journal of Korea Society of Industrial Information Systems
• /
• v.3 no.1
• /
• pp.67-77
• /
• 1998

Reliability growth testing used to evaluate reliability in the automobile industry have not always been able to correctly address reliability concerns with increased confidence. The demand to confirm to all product performance requirements under various operating environments has added to the complexity of accurately assessin theproduct's reliability in the required development time. In addition, it is often desired to determine the relationship of a product's reliability to cost, development time, design, manufacturability and assembly. This paper presents the methods for reliability growth modeling to evaluate and interpret reliability concerns to support the reliability analysis of automobile assemblies and systems. This reliability growth modeling process is a mechanism to help "build in" reliability during early phases in the vehicle devleopment stage.

• The Korean Journal of Food And Nutrition
• /
• v.12 no.6
• /
• pp.569-574
• /
• 1999

Response surface methodology(RSM) was applied to determine the optimum heating conditions(tem-perature and time) for the inactivation of bacteria associated with food hygiene. Coefficients of determinations(R2) for the cell growth were 0.9155(P<0.05) in Pseudomonas aeruginosa 0.8997(P<0.05) in Escherichia coli 0.9690(P<0.01) in Salmonella typhimurium 0.9393(P<0.05) in Enterobacter aerogenes and 0.7905 in Vibrio parahaemolyticus. The growth of strains was significantly affected by the temperature and time and reaction to temperature was most closely correlated to the inhibition of growth. On the basis of superimposed contour maps of cell growth the optimum range of heating conditions were 55.62-6$0^{\circ}C$ and 19.25-30 min.

• Korean System Dynamics Review
• /
• v.1 no.1
• /
• pp.29-56
• /
• 2000

During the past few years, cyberspace and electronic commerce has been expanding throughout the world rapidly. The purpose of this paper is to find out policy leverages for boosting up cyberspace and electronic commerce using system dynamics simulation modeling approach. The system dynamics simulation model developed in this paper allows analysis of both the effect of factors on dynamic growth pattern of cyberspace as well as the effect of time delay in information processing, money transfer and delivery on model behavior. Finding of this study is that capacity of information infrastructure and size of cyberspace population are key factors of cyberspace growth. Also, reducing time delay in information flow, money flow, and delivery flow is an important policy leverages for growth of electronic commerce.