• Journal of Welding and Joining
• /
• 제14권1호
• /
• pp.38-46
• /
• 1996

High temperature low cycle fatigue crack growth behavior is investigated over a range of two temperatures and various frequencies in SUS 304 stainless steel. It is found that low frequency and temperature can enhance time-dependent crack growth. With high temperature, low frequency and long crack length, ${\Delta}J_c/{\Delta}J_ f$, the ratio of creep J integral range to fatigue J integral range is increased and time-dependent crack growth is accelerated. Interaction between ${\Delta}J_f$ and ${\Delta}J_c$ is occured at high frequency and low temparature and ${\Delta}J_c$, creep J integral range is fracture mechanical parameter on transition from cycle-dependent to time dependent crack growth in creep temperature region.

• Journal of Chest Surgery
• /
• 제6권1호
• /
• pp.15-22
• /
• 1973

The definition of cancer, its diagnosis and its prognosis all depend upon description of growth. To the layman a synonym for cancer is a "growth". There are no quantitative terms for the description of growth or growth rate in clinical use. There has been no attempt to assign values that would define "rapidly" or "slowly" growing. Estimates of growth potentiality are implied in the descriptive phrases "poorly differentiated" or "well differentiated", "highly malignant" or "low grade malignancy". and in systems of grading. These qualifying terms represent a personal impression, clinically useful in prognosis, but relative in nature. They do not lend themselves to uniform application or precise measurement for purpose of comparison. Growth is related to size and time. The volume of tumor depends upon the duration of the period of growth and the rate of growth. If the interval and change in volume are known. the average growth rate can be determined. If the growth rate is determined, and assumed to be constant., the duration of a given tumor and the time of inception can be estimated. The commonest concept of the origin of cancer is that as a result of a mutation involving a single cell, succeeding divisions of cells establish a colony with the characteristics recognizable as cancer. If the growth rate of the hypothetical tumor were constant it could be described in terms of "tumor volume doubling time". In the department of thoracic surgery of St. Mary hospital in Catholic Medical College, a clinical evaluation for the growth rate, degree of malignancy, resectability and prognosis was done on a total 24 cases of primary bronchogenic carcinoma which contour was significant on the chest X-ray film as possible estimating the tumor volume doubling time. The following results were obtained: 1. In the cases of 6.0cm or more in diameter of minor size at operation the resectability rate was lower and in the cases of 60 days or more in the tumor or volume doubling time the resectability rate was higher. 2. If differentiation of cancer cells was lower graded in tissue pathology, the tumor volume was shorter and the resectability rate was lower. 3. The tumor volume doubling time of the primary bronchogenic carcinoma occured more over 60 years of age was slightly shorter than under 60 years of age. 4. The tumor size at operation was more important to evaluate the survival time and prognosis than the tumor volume doubling time because the tumor growth was not always constant, we presume.mor volume doubling time because the tumor growth was not always constant, we presume.

• 무역학회지
• /
• 제46권6호
• /
• pp.191-209
• /
• 2021

In this paper, various time series analysis models and machine learning models are presented for long-term prediction of export growth rate, and the prediction performance is compared and reviewed by RMSE and MAE. Export growth rate is one of the major economic indicators to evaluate the economic status. And It is also used to predict economic forecast. The export growth rate may have a negative (-) value as well as a positive (+) value. Therefore, Instead of using the ReLU function, which is often used for time series prediction of deep learning models, the PReLU function, which can have a negative (-) value as an output value, was used as the activation function of deep learning models. The time series prediction performance of each model for three types of data was compared and reviewed. The forecast data of long-term prediction of export growth rate was deduced by three forecast methods such as a fixed forecast method, a recursive forecast method and a rolling forecast method. As a result of the forecast, the traditional time series analysis model, ARDL, showed excellent performance, but as the time period of learning data increases, the performance of machine learning models including LSTM was relatively improved.

• Communications for Statistical Applications and Methods
• /
• 제14권3호
• /
• pp.497-506
• /
• 2007

Coverage-based NHPP SRGMs have been introduced in order to incorporate the coverage growth behavior into the NHPP SRGMs. The coverage growth function representing the coverage growth behavior during testing is thus an essential factor of the coverage-based NHPP SRGMs. This paper proposes a class of discrete time coverage growth functions and illustrates its application to real data sets.

• 미생물학회지
• /
• 제29권4호
• /
• pp.263-266
• /
• 1991

The growth of T. novellus in auto trophic and geterotrophic media was studied to determine the time required for cells to enter stationary phase and relative percentage of ribosomal proteins. When T. novellus was grown autotrophically, growth proceeded at a slow rate characteristic of autotrophs and did not enter log phase until the end of the first day. Logarithmic growth proceeded for 3-4 days at which time the cells entered the stationary phase. In particular, logarithmic growth was accompanied by decreasing pH of culture media and in the stationary phase the pH levelled off at 6.0, a decrease of 1.6 pH value compared to original pH of media. The pH decrease was greatest during log phase when cells oxidized thiosulfate to $H_{2}$$SO_{4}$. The doubling time was about 26h. In heterotrophic media growth proceeded at a much faster rate and cells entered stationary phase 20-22h after inoculation. The doubling time was 3h. The protein content of the ribosomes in T. novellus grown heterotrophically was 4.2% greater than those from the organism grown autotrophically.

• International Journal of Automotive Technology
• /
• 제1권2호
• /
• pp.71-77
• /
• 2000

High temperature materials in service are subjected to mechanical damage due to operating load and metallurgical damage due to operating temperature. Therefore, when designing or assessing life of high temperature components, both factors must be considered. In this paper, the effect of tensile hold time on high temperature fatigue crack growth and long term prior thermal aging heat treatment on creep rupture behavior were investigated using STS 316L and STS 316 austenitic stainless steels, which are widely used for high temperature components like in automotive exhaust and piping systems. In high temperature fatigue crack growth tests using STS 316L, as tensile hold time increased, crack growth rate decreased in relatively short tensile hold time region. In long term aged specimens, cavity type microcracks have been observed at the interface of grain boundary and coarsened carbide.

• 한국자동차공학회논문집
• /
• 제10권4호
• /
• pp.136-140
• /
• 2002

High temperature fatigue crack growth behavior of P92 and STS 316L steel were investigated under four load conditions using CT type specimens. Loading and unloading times for the low wave forms were combinations of 1 sec. and 50 sec., which were two symmetric wave forms and two unsymmetric wave forms. Their behaviors are characterized using ΔK parameter. In STS 316L, Crack growth rate generally increases as frequency decreases. However, sensitivity of the loading rate to crack growth rate was fecund to be far greater than that of the unloading time. It is because as loading time increases, creep occurs at crack tip causing the crack growth rate to increase. However creep does not occur at the crack tip even if the unloading time is increased. In P92 steel, crack growth rate showed same behavior as in STS 316L. But the increase in loading or unloading time made almost no difference in crack growth rate, suggesting that no significant creep occurs in P92 steel even though loading time increases. After conducting high temperature tensile tests and comparing high temperature fatigue crack growth rates under various wave forms, it was proved that P92 steel has not only good high temperature properties but also improved, better high temperature fatigue properties than STS 316L.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권5호
• /
• pp.21-27
• /
• 2021

The financial sector is one of the most important building blocks of the economy. When this sector efficiently implemented a well-crafted program on banking and financial system to translate financial activities to income-generating activity, economic growth will be realized. Hence, this study analyzed the effect of financial intermediation on economic growth and the existence of cointegrating relationship using time-series data from 1986 to 2015. The influence of financial intermediation in terms of bank credit to bank deposit ratio, private credit, and stock market capitalization and time trend to economic growth was estimated using ordinary least squares (OLS) multiple regression. The results showed that all the financial intermediation indicators and time trend exert significant effect on Gross Domestic Product (GDP) per capita. The positive sign of the time trend indicates that there is an upward trend in GDP per capita averaging approximately 0.06 percent annually. Furthermore, the cointegration test using the Johansen procedure revealed that there is a presence of long-term equilibrium relationship between financial intermediation and time trend and economic growth, and rules out spurious regression results. This study established the idea that financial intermediation in the Philippines has a significant and vital role in stimulating growth in the economy.

• 통합자연과학논문집
• /
• 제14권1호
• /
• pp.1-5
• /
• 2021

라디오 진동수 스퍼터를 이용하여 실리콘(110) 기판위에 증착시간을 60분, 120분 그리고 180을 변화시켜서 산화아연 박막을 만들었다. ZnO₂ 박막의 입자 성장면을 X선 회절 장치를 써서 분석한 결과 박막의 주 성장면(002)면과 (103)면의 방향이 증착 시간의 영향을 많이 받았다. 전자 주사 현미경을 통하여 ZnO₂박막의 입자 성장을 관찰 한 결과 ZnO₂박막이 증착 초기에는 성장이 정체되는 인큐베이션 시간이 필요하다가 일정 시간이 지나면 다시 입자 성장이 일어나는 현상이 관찰 되었다. ZnO₂박막의 화학 분석을 한 결과는 증착 시간의 증가가 ZnO₂박막내의 산소의 양과는 변화가 없었지만 Zn의 성분에 변화가 관찰 되어서 박막의 증착 시간이 박막내의 Zn성분에는 영향을 미침을 알 수 있었다.

• 한국진공학회지
• /
• 제19권5호
• /
• pp.365-370
• /
• 2010

분자선 에피택시 방법을 이용하여 GaAs 기판 위에 GaAs 및 AlGaAs 에피층을 성장하면서 성장 멈춤 효과를 연구하였다. 성장 멈춤 시간에 따른 에피층 성장 과정은 반사 고에너지 전자회절로 측정하였다. 성장 멈춤 시간은 0, 15, 30, 60초로 하였다. 그리고 성장 멈춤 시간을 달리하여 GaAs/$Al_{0.3}Ga_{0.7}As$ 다양자우물을 성장한 후 양자우물의 특성을 조사하였다. 반사 고에너지 전자회절의 강도 진동은 성장 멈춤 시간에 영향을 받고 있었다. 그리고 양자우물의 광특성도 성장 멈춤 시간에 의존하고 있었다. 성장 멈춤 시간이 30초일 때 우물과 장벽층 사이에 급준한 계면을 가지는 에피층을 얻을 수 있었다.