• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.1
• /
• pp.59-63
• /
• 1999

Yield and growth characteristics were compared for five rice cultivars; a new Tongil-type, so called "super-rice", Dasanbyeo, an old Tongil-type Milyang 23, two japonicas Dongjinbyeo and Ilpumbyeo, and a new plant type (NPT)line IR65600-27-1-2. The objective of this stusy was to clarify the high yielding capacity of Dasanbyeo in terms of growth characteristics. The average grain yield (9 t/ha) of Dasanbyeo was higher than that of Milyang 23 by ca. 9% that of japonicas by 20 to 30%, and that of NPT line by ca. 100%. The higher grain yield of Dasanbyeo was attributable not only to the greater dry matter production but also to the higher harvest index (HI). Dasanbyeo showed the greatest dry matter at harvest owing not only to the rapid leaf expan-sion at early growth stage and the resulting high LAI through the entire growth stage but also to the high NAR despite the high LAI. The rapid leaf expansion of Dasanbyeo at early growth stage seemed to be related in part to the profuse tillering capacity. HI was 0.53 in Dasanbyeo, 0,51 in Milyang 23, 0.41 in japonicas, and 0.35 in NPT line. Dasanbyeo was indebted for its higher HI to the relatively high grain filling ratio in spite of a much greater sink size than the other cultivars. Dasan had a greater source to sink ratio during grain ripening as measured by LAD/spikelet and dry matter production/spikelet which showed positove correlations with the grain ripening ratio. New plant type (NPT) line showed the lowest grain yield owing to the small sink size and the low grain filling ratio which seemed to have resulted from the abundant occurrence of weak-strength spikelets. The weak sink strength, in turn, seemed to have suppressed photosynthesis during the grain ripening stage.

• Proceedings of the KWS Conference
• /
• 2001.05a
• /
• pp.224-227
• /
• 2001

In this study, CT specimens were prepared hem ASTM SA516 which was used for pressure vessel plates for room and low temperature service. And we got the following characteristics from fatigue crack growth test carried out in the environment of room and low temperature at $25^{\circ}C$, -3$0^{\circ}C$, -6$0^{\circ}C$, -8$0^{\circ}C$, -l$0^{\circ}C$ and -l2$0^{\circ}C$ and in the range of stress ratio of 0.1, 0.3 by means of opening mode displacement. At the constant stress ratio, the threshold stress intensity factor range $\Delta K_{th}$ in the early stage of fatigue crack growth ( Region I ) and stress intensity factor range $\Delta$K in the stable of fatigue crack growth ( Region II) was increased in proportion to descend temperature. It assumed that the fatigue resistance characteristics and fracture strength at low temperature is considerable higher than that of room temperature in the early stage and stable of fatigue crack growth region. The straight line slope relation of logarithm da/dN - $\Delta$K in Region II, that is, the fatigue crack growth exponent m increased with descending temperature at the constant stress ratio. It assumed that the fatigue crack growth rate da/dN is rapid in proportion to descend temperature in Region H and the cryogenic-brittleness greatly affect a material with decreasing temperature.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.03a
• /
• pp.178-183
• /
• 1998

This paper examines the crack growth behavior of 7075-T651 and 5052-H32 aluminum alloys for variable load within tensile load range condition. The cantilever beam type specimen with a chevron notch is used in this study. The crack growth and closure are investgated by compliance method. The applied initial stress ratio is R=0.3 and variable load are R=0.65, 0.46. Crack length, stress intensity factor range, ratio of effective stress intensity factor range and crack growth rate etc. are inspected with fracture mechanics estimate.

• Animal Bioscience
• /
• v.34 no.5
• /
• pp.895-903
• /
• 2021

Objective: The objective of this study was to investigate the effects of various dietary unsaturated to saturated fatty acids ratios (UFA to SFA ratios) on growth performance, carcass traits, blood lipid parameters, tissue fatty acid (FA) composition, and meat quality of finishing pigs. Methods: A total of 45 crossbred pigs ([Duroc×Landrace]×Yorkshire), with an average initial body weight of 60.3±2.4 kg, were randomly allocated to three treatment groups of 1:1, 2:1, and 3:1 dietary UFA to SFA ratios. Results: Both average daily gain and average daily feed intake of pigs were decreased linearly (p<0.05), whereas backfat thickness was decreased linearly (p<0.05) with increasing of dietary UFA to SFA ratio. Serum triglyceride and low density lipoprotein cholesterol were decreased quadratically or linearly (p<0.05) respectively, whereas high density lipoprotein cholesterol was increased quadratically (p<0.05) with increasing dietary UFA to SFA ratio. In M. longissimus thoracis, the proportion of C18:1 and monounsaturated FA was decreased linearly (p<0.05), whereas the proportion of C18:2n-6, C20:4n-6 and polyunsaturated FA (PUFA) were increased linearly (p<0.05) as dietary UFA to SFA ratio increased. In the subcutaneous adipose tissue, the proportion of SFA was decreased linearly (p<0.05), whereas the proportion of n-6 PUFA, n-3 PUFA, and the UFA to SFA ratios were increased linearly (p<0.05) with increasing of dietary UFA to SFA ratio. Meat color scores and shear force of pigs were decreased linearly (p<0.05), whereas drip loss and cooking loss were increased linearly (p<0.05) with increasing of dietary UFA to SFA ratio. Conclusion: Appropriately boosted dietary UFA to SFA ratio could be conductive to optimize blood lipid parameters and tissue FA composition. However, when the ratio is too high or too low it tends to have negative effects on growth performance and meat quality.

• Journal of the Korean Society of Safety
• /
• v.16 no.1
• /
• pp.18-24
• /
• 2001

The fatigue crack growth behavior of the SA516/70 steel which is used for pressure vessels was examined experimentally at room temperature, $-60^{\circ}C$,$-80^{\circ}C$ and $-100^{\circ}C$ with stress ratio of R=0.05, 0.1 and 0.3. Fatigue crack propagation rate da/dN related with stress intensity factor range ${\Delta}K$ was influenced by stress ratio in stable of fatigue crack growth (Region II) with an increase in ${\Delta}K$. The resistance of fatigue crack growth at low temperature is higher compared with that at room temperature, which is attributed to the extent of plasticity-induced by compressive residual stress according to the cyclic loads. Fractographic examinations reveal that the differences of the fatigue crack growth characteristics between room and low temperatures are mainly explained by the crack closure and the strengthening due to the plasticity induced and roughness induced.

• International Journal of Costume and Fashion
• /
• v.5 no.1
• /
• pp.75-89
• /
• 2005

The purpose of this study is to empirically ascertain how the fitness between marketing strategy each firm chooses and environment facing each firm affects the performance of firms measured by the growth rate of market share and the growth rate of profit/sales ratio. In doing so, firms are divided into three groups. With regard to the marketing strategy, firms are classified into three groups based on marketing strategy type; prospector, analyzer, and defender. The main result of this study are as follows: First, responding firms are classified into prospector, analyzer, and defender following Miles & Snow's marketing strategy types. This classification is made using a self typing method and further confirmed by a factor analysis using a number of variables relating marketing objectives and marketing mix. Second, the results show that there are significant differences across marketing strategies in the performance measures of the growth rate of market share and profit/sales ratio. It seems, however, that there is no straight forward relationship between the marketing strategy and the performance measures. This strongly implies that the type of marketing strategy to be adopted by each firm should depend on the environment facing each firm. Third, the result indicates that the growth rate of market share tends to depend only on the marketing strategy type regardless of sufficiency and variation of environment, but profit/sales ratio tends to depend on the fitness between marketing strategy type and environment. It implies that a firm should adopt different marketing strategies for different environment characteristics, in order to enhance the efficiency of resources used reflected in the profit/sales ratio.

• Asian-Australasian Journal of Animal Sciences
• /
• v.9 no.1
• /
• pp.31-35
• /
• 1996

An experiment was conducted on rainbow trout(Oncorhynclus mykiss) for eight weeks to investigate the growth performance of the fish fed with different dietary protein with constant diet energy of $20kJg^{-1}$. Four diets containing 25, 30, 35 and 40% crude protein were used. The highest mean final weight was obtained for the fish fed with diet having 35% protein. Growth performance in terms of Specific Growth Rate (SGR), Food Conversion Ratio (FCR) and Protein Efficiency Ratio (PER) were calculated for each diet. There were no significant differences in SGR but the highest value was exhibited by fish fed with 35% protein diet. Significant differences were found among FCR of different diets. Diets with 35 and 40% crude protein gave better FCR value than that of 25 and 30% crude protein. Although significant differences were not found between PER of different diets but PER of diet with 35% protein was found to be better than PER of both high and low protein diets (diets of 40 and 30% crude protein). It is concluded that diet having 35% protein with protein energy ratio of $17.53mgkJ^{-1}$ was suitable for rainbow trout (O. mykiss) among the protein spectrum used.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2001.11a
• /
• pp.80-87
• /
• 2001

The fatigue crack growth behavior of the SA516/60 steel which is used for pressure vessels was examined experimentally at room temperature $25^{\circ}C, -30^{\circ}C, -60^{\circ}C, -80^{\circ}C, -100^{\circ}C$ and -l2$0^{\circ}C$ with stress ratio of R=0.05, 0.1 and 0.3. Fatigue crack propagation rate da/dN related with stress intensity factor range ΔK was influenced by stress ratio in stable of fatigue crack growth (Region II) with an increase in ΔK. The resistance of fatigue crack growth at low temperature is higher compared with that at room temperature, which is attributed to the extent of plasticity-induced by compressive residual stress according to the cyclic loads. Fractographic examinations reveal that the differences of the fatigue crack growth characteristics between room and low temperatures are mainly explained by the crack closure and the strengthening due to the plasticity induced and roughness induced.

• The Korean Journal of Food And Nutrition
• /
• v.34 no.6
• /
• pp.568-575
• /
• 2021

The purpose of this study was to investigate the effects of extract mixture of C. wilfordii and P. umbrosa (IPLUS-CWPU) on bone growth in 4-week old young male SD rats. To confirm the effect of IPLUS-CWPU, we measured the length of bone growth plate, the ratio of proliferative zone to the length of growth plate and the expression level of insulin-like growth factor, IGF-1. The IPLUS-CWPU treatment shows a significant increase of tibial and femoral growth plate and the ratio of proliferative zone in growth plate. Especially, the length increased by 13.9% and 25.3% in the tibia and femur, respectively, in the high-dose group compared to the normal group. Moreover, the expression of IGF-1 gene in liver was upregulated in IPLUS-CWPU treated groups. These results indicated that IPLUS-CWPU administration could increase the proliferative zone of bone growth plate in early developmental stage by upregulation of IGF-1 gene.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.6
• /
• pp.1990-2001
• /
• 1991

The fatigue life and crack penetration behavior of high strength steel have been studied in detail both experimentally and analytically. The fatigue crack shape of a smooth specimen is almost semicircular, while a specimen with stress concentration becomes semielliptical according to stress concentration shape. The aspect ratio of smooth specimens calculated using the Newman-Raju's formular is smaller than the value obtained from the experiment. On the other hand, the aspect ratio of the stress concentration specimen shows a good agreement with experimental results. It is found that the crack growth behavior on the back surface after the penetration is unique and can be divided into three stages ; rapid growth region, constant growth region and acceleration growth region. By using the K value suggested in this study, the particular crack growth behavior and crack shape can be estimated quantitatively.