• 한국해양바이오학회지
• /
• 제15권2호
• /
• pp.41-48
• /
• 2023

The objective of the present study was to improve the biomass productivity of newly isolated freshwater green microalga Parachlorella sp. This was accomplished by culture conditions optimization, including CO₂ concentration, superficial gas velocity, and light intensity, in 0.5 L bubble column photobioreactors. The supplied CO₂ concentration and gas velocity varied from 0.032% (air) to 10% and 0.02 m/s - 0.11 m/s, respectively, to evaluate their effects on growth kinetics. Next, to maximize the production rate of Parachlorella sp., a lumostatic operation based on a specific light uptake rate (q_e) was applied. From these results, the optimal CO₂ concentration in the supplied gas and the gas velocity were determined to be 5% and 0.064 m/s, respectively. For the lumostatic operation at 10.2 µmol/g/s, biomass productivity and photon yield showed significant increases of 83% and 66%, respectively, relative to cultures under constant light intensity. These results indicate that the biomass productivity of Parachlorella sp. can be improved by optimizing gas properties and light control as cell concentrations vary over time.

• 한국정보처리학회논문지
• /
• 제2권4호
• /
• pp.477-486
• /
• 1995

본 논문에서는 이산수학에서 많이 다루고 있는 Galois-격자를 이용하여 객체지향 분석 모델을 구축하고 이를 유지 보수하기 위한 방법들을 제시하고, 예를 통해 객체 지향분석 모델을 구축하는 것에 대해 분석하였다. 클래스 객체들과 그들 사이에 형성 된 속성을 이항관계로 표현한 Galois-격자를 이용하여 관계(relation)를 정립하고, 분 석단계의 클래스 계층구조에 새로운 클래스 노드를 추가할 때마다 Galois-격자구조를 점증적으로 갱신하는 알고리즘을 제안하였다. 이러한 제안은 실험을 통하여 새로운 클 래스 노드의 추가는 일정한 시간내에 수행됨을 알았으며, 격자구조의 성장 속도는 클 래스 노드수와 비례하며, 클래스 노드에 관련된 속성의 수가 상한치를 갖을 때 알고리 즘의 최악경우 복잡도는 객체수에 따라 선형적으로 증가함을 보였다. 이 결과는 객체 지향 분석 모델의 이해도와 모델의 유지수하는 추적도를 높이고, 객체지향 시스템의 장점인 클래스의 재사용 가능성을 향상시키고 클래스 계층 유지보수를 실질적으로 지 원한다.

• 대한치과보철학회지
• /
• 제31권4호
• /
• pp.482-505
• /
• 1993

The purpose of this study was to evaluate the fracture characteristics and the effect of resin bonding of laminate porcelain. In order to characterize the indentation-induced crack, Young's moduli and characteristic indentation dimensions were measured. The fatigue life under three point flexure test was measured using the electro-dynamic type fatigue machine, and the crack propagation with thermocycling was investigated on the condition of 15 second dwell time each in $5^{\circ}C\;and\;55^{\circ}C$ bath. The Vickers indentation pattern and the fracture surface were examined by an optical microscope and a scanning electron microscope (SEM). The results obtained were summarized as follows ; 1. Young's moduli(E) of the laminate porcelain and the resin cement used in this experiment were $62.56{\pm}3.79GPa$ and $15.01{\pm}0.12GPa$, respectively. 2. The initial crack size of the laminate porcelain was $69.19{\pm}5.94{\mu}m$ when an indentation load of 9.8N was applied, and the fracture toughness was $1.065{\pm}0.156MPa\;m^{1/2}$. 3. The fatigue life of laminate porcelain showed the constant fracture range at the stress level 27.46-35.30MPa. 4. When a cyclic flexure load was applied, the fatigue life of resin-bonded laminate porcelain was more decreased than that of laminate porcelain. 5. When a thermocycling was conducted, the crack growth rate of resin-bonded laminate porcelain was more increased than that of laminate porcelain. 6. Fracture surface showed the radial crack, the lateral crack, and the macroscopic crack branching region beneath the plastic deformation region when an indentation load of 9.8N was applied.

• 한국해양공학회지
• /
• 제6권1호
• /
• pp.131-139
• /
• 1992

The understanding and appllication of fatigue crack propagation mechanism in variable amplitude loading is very important for life prediction of the air travel structures. Particularly, the retardation and arrest behavior of fatigue crack propagation by single tension overloading is essential to the understanding and appllication of fatigue crack propagation mechanism in variable amplitude loading. Numerous studies of the retardation behavior have been performed, however investigations of the arrest behavior have not been enough yet. As for the arrest behavior, Willenborg had reported that the overload shut-off ratio $[R_{so}=(K_{OL})/K_{max})_{crack arrest}]$ had been the material constant, but recently several investigators have reported that the overload shut-off ratio depends upon the stress ratio. In this study, authors have investigated the effect of stress ratio on the threshold overload shut-off ratio to generate arrest of fatigue crack growth in high tensile aluminum alloy 7075-T735 which have used in material for air travel structures, It has been $-0.4\leqqR\leqq0.4$ till now, the region of stress ratio investigated. The threshold overload shut-off ratio has decreased as stress ratio has increased in overall region of -$-0.4\leqqR\leqq0.4$ and the linearity has been seen in this material. Moreover, the experimental equation between $R_{so}$ and R has been made; The relation has been $R_{so}=-R+2.6$.

• 한국세라믹학회지
• /
• 제40권5호
• /
• pp.441-446
• /
• 2003

ZnO 미세 분말을 sol-gel법으로 제조하였다. Gel분말의 형상은 하소 열 처리 온도에 따라 판상, 침상,그리고 구형으로 변화하였고, $700^{\circ}C$ 이하 하소 온도에서는 온도에 따른 입자 성장 속도가 낮았지만, $700^{\circ}C$ 이상의 온도부터 급격한 입자 성장 속도를 나타내었다. 입자 사이즈가 커질수록 결정화 정도는 더 커졌고, gel분말의 유기 화합물들은 30$0^{\circ}C$ 이하 온도에서 휘발되었다. 열 처리 온도에 따른 ZnO 분말은 S자형(sigmoidal shape)의 전기전도성 거동을 보였고, gel분말의 열처리 온도가 감소할수록 일정한 전도성이 일정한 온도 구간이 좁게(narrow) 나타났다. 최적의 CO 기체 센싱 특성은 50$0^{\circ}C$의 하소 열처리한 시편에서 나타났고, 열처리 온도가 올라갈수록 센싱 특성은 감소하였다.

• 대한기계학회논문집B
• /
• 제41권6호
• /
• pp.389-395
• /
• 2017

본 연구는 정적 연소 조건에서 Octane 단일 연료 액적의 매연 생성 거동에 관한 정보를 제공하기 위해 수행하였다. 이를 위해 동일한 분위기 압력($P_{amb}$) 1.0 atm과 산소 농도($O_2$) 21%, 질소 농도($N_2$) 79% 조건에서 초기 액적 직경($d_0$) 변화에 따른 Octane 액적의 매연 생성 특성 실험 결과를 제시하였다. Octane 액적 연소 가시화는 초고속 카메라를 사용하여 촬영하였고, 분위기 조건은 제어 시스템에 의해 동일한 조건을 유지하였다. Octane 액적 연소 결과, 매연 생성량은 동일한 분위기 조건에서 초기 액적 직경 변화의 영향이 크게 나타나지 않았다. 또한, 매연 체적 분율 최댓값($f_{vmax}$)은 $135^{\circ}{\sim}315^{\circ}$ 측정 방향에서 높은 결과를 보였다. 이는 액적 점화 이후 Igniter의 이동 과정에서 생성된 Soot-tail로 인해 매연 체적분율 결과가 증가된 것으로 나타났다.

• 수산해양기술연구
• /
• 제24권2호
• /
• pp.94-100
• /
• 1988

평면 굽힘부식피로 시험기를 사용하여 선박용 알루미늄합금재의 부식피로파양에 관한 연구를 한 결과 다음과 같은 결론을 얻었다. 1. 비저항이 증가함에 따라서 초기 부식피로균열발생까지의 반복회수는 지연되고, 그 부식감수성은 감소하는 양상을 나타낸다. 2. 비저항이 감소할수록 Paris rule의 실험상수 m 값은 작아지면서 응력강도 계수값에 비해 부식에 의한 영향이 더욱 민감해 진다. 3. 알루미늄 5086 합금의 부식피로균열은 입계균열파양의 양상을 보이고 있다. 4. 응력강도계수값이 증가함에 따라 부식감수성은 감소되어지고 응력강도계수값이 40kg.mm super(-3/2) 이상일 때 부식감수성은 거의 균일하게 된다.

• The Korean Journal of Ecology
• /
• 제14권4호
• /
• pp.449-455
• /
• 1991

The water striders, gerris paludum insularis larvae which were fed with the drosophila melanogaster cultured on the appli diet and artificial diet, were reared in the growth cabinet controlled as the two constant temperature regimes of 25 c and 30 c under the condition of photoperiod 16l : 8d, light intensity 510 240 lux, relative humidity 65 3%, and in the natural state. The effects of temperature and diet on the devolopment of g. paludum insularis were analyzed and the results were summarized as follows. 1. The total developmental period of the water strider larvae fed with the d. melanogaster reared on the apple diet at the natural stste was the longest 40 days, and the total devopmental periods at 25 c and 30 c were 35 days and 27 days respectively. The tolal developmental period of larvae fed with d. melanogaster reared on the artifical diet at 25 c was the longest 42 dats, and the total developmental periods at natural stste and 30 c were 32 days and 27 days, respectively. 2. In the larval developmental stages, the fifth stage was longer than that of any stage. The duration of egg stage which was not influenced by diet at 25 c was the longest. 3. The water strider larvae fed which the d. melanogaster reared on the artificial diet at 25 c did not complete their devolopment. 4. No significant difference was odserved in the developmentperiod for diet at 30 c. but, there were significant differences in developmental periods for diet at 25 c and natural state. 5. The rate of adult emergence on the apple diet was higher than that of the artificial diet was higher than of the artificial diet. 6. The shapes of the survivorship curve were convex-curve. 7. The development periods of the larval stages of water striders might be affected to temperature and diet dependently.

• Journal of the Korean Wood Science and Technology
• /
• 제46권6호
• /
• pp.656-669
• /
• 2018

Tropical bamboo species, which have a very rapid growth rate, are considered as a promising non-timber forest product capable of exhibiting new functionality by carbonization technology. This study was conducted to compare the characteristics of carbonized bamboos from Andong (G. pseuudoarundinacea (Steudel) Widjaja), Hitam (G. atrovialacea), Tali (G. apus), Kuning (B. vulgaris Var. striata (Lodd. Ex Lindl)), and Ampel (B. vulgaris Scharad. ex Wendland), and Betung (D. asper). Each bamboo was carbonized at 200, 400, 600, 800, and $1,000^{\circ}C$, respectively, and their physical and anatomical characteristics were investigated. The result showed that the volume and weight of carbonized bamboo decreased with increasing carbonization temperature and showed the substantial changes of volume and weight between 200 and $400^{\circ}C$. The highest and the lowest density of carbonized samples were found in Ampel bamboo and Betung bamboo, respectively. The density of all carbonized bamboos tended to decrease after carbonization at 200 and $400^{\circ}C$ and relatively become constant afterwards. The carbonized bamboo prepared at 800 and $1,000^{\circ}C$ showed better refining degree. The results of the anatomical observation showed that the vascular diameter of carbonized bamboo decreased with increasing carbonization temperature, and the shrinkage in radial and tangential direction showed similar tendency. Statistical analysis showed that there was significant correlation between physical contraction and anatomical contraction. Based on the results of this study, comprehensive data about Indonesian bamboo charcoals could be obtained and it will be useful for future application studies.

• 한국재료학회지
• /
• 제12권6호
• /
• pp.493-498
• /
• 2002

$Al_2O_3$ is a promising gate dielectric because of its high dielectric constant, high resistivity and low leakage current. Since $OH^-$ radical in $Al_2O_3$ films deposited by ALD using TMA and $H_2O$ degrades the good properties of $Al_2O_3$, TMA and $O_3$ were used to deposite $Al_2O_3$ films and the effects of $O_3$ on the properties of the $Al_2O_3$ films were investigated. The growth rate of the $Al_2O_3$ film under the optimum condition was 0.85 $\AA$/cycle. According to the XPS analysis results the $OH^-$ concentration in the $Al_2O_3$ film deposited using $O_3$ is lower than that using $H_2O$. RBS analysis results indicate the chemical formula of the film is $Al_{2.2}O_{2.8}$. The carbon concentration in the film detected by AES is under 1 at%. SEM observation confirms that the step coverage of the $Al_2O_3$ film deposited by ALD using $O_3$ is nearly 100%.