• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.158-158
• /
• 2009

This paper focuses on improving organic thin film transistor (OTFT) characteristics by controlling the self-organization of pentacene molecules with an alignable high-dielectric-constant film. The process, based on the growth of pentacene film through high-vacuum sublimation, is a method of self-organization using ion-beam (IB) bombardment of the $HfO_2/Al_2O_3$ surface used as the gate dielectric layer. X-ray photoelectron spectroscopy indicates that the IB raises the rate of the structural anisotropy of the $HfO_2/Al_2O_3$film, and X-ray diffraction patterns show the possibility of increasing the anisotropy to create the self-organization of pentacene molecules in the first polarized monolayer. An effective mobility of $2.3{\times}10^{-3}cm^2V^{-1}s^{-1}$ was achieved, which is significantly different from that of pentacene films that are not aligned. The proposed OTFT devices with an ultrathin $HfO_2$ structure as the gate dielectric layer were operated at a gate voltage lower than 5 V.

• 농촌지도와개발
• /
• 제25권2호
• /
• pp.71-83
• /
• 2018

This study aims to analyze the competitiveness of agricultural products in Korea, China and Japan and the effect of increasing imports from Korea and China. and then we discussed how to cooperate in the agricultural trade field between the three countries. The results are summarized as follows. First, The intra-industry trade of agricultural products was the most active in Korea and China, followed by the intra-industry trade index between Korea and Japan. The intra-industry trade between China and Japan were the lowest. Second, The mutual complementarity of agricultural products trade between Korea, China and Japan is mostly high. Among them, Korea and Japan are the highest, while Japan and China have the lowest complementarity. Third, it was found that in tariff elimination, imports of rice and meat products increased the most, while the import growth rate of green tea, meat products and ginseng increased the most. Finally, the three countries in Korea, China, and Japan can consider the way to increase the trade of agricultural products in the region by internalizing the trade of complementary items while maintaining a constant level of production of mutually competitive products.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.116-116
• /
• 2009

This paper focuses on improving organic thin film transistor (OTFT) characteristics by controlling the self-organization of pentacene molecules with an alignable high-dielectric-constant film. The process, based on the growth of pentacene film through high-vacuum sublimation, is a method of self-organization using ion-beam (IB) bombardment of the $HfO_2/Al_2O_3$ surface used as the gate dielectric layer. X-ray photoelectron spectroscopy indicates that the IB raises the rate of the structural anisotropy of the $HfO_2/Al_2O_3$ film, and X-ray diffraction patterns show the possibility of increasing the anisotropy to create the self-organization of pentacene molecules in the first polarized monolayer.

• 수산해양기술연구
• /
• 제26권2호
• /
• pp.204-212
• /
• 1990

The SMC composite, now being considered in certain structural applications, is anticipated to experience repeated loading during service. Thus, understanding of the fatigue behavior is essential in proper use of the composite material. In this paper, using the SMC composite composed of E-glass chopped strand and unsaturated polyester resin three point bending fatigue tests are carried out to investigate the fatigue crack propagating behavior under various cyclic stresses and fatigue damage of various microcrack forms. The following results are obtained from this study; 1) Most of the total fatigue life of the SMC composite is consumed at the initial extension or the growth of the macroscopic crack. 2) A Paris' type power-law relationship between the crack propagation rate and stress intensity factor range is obtained, and the value of material constant m is much higher (m=9~11)than that of other metals. 3) In case of high cyclic stress the fatigue damage show high microcrack density and short crack length, but in case of low cyclic stress does it vice versa. 4) Fatigue damage is characterized by microcrack density, crack length and distribution of crack orientation.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제14권4호
• /
• pp.225-247
• /
• 2010

In this paper, we establish a two-competitive-prey and one-predator Holling type II system by introducing a proportional periodic impulsive harvesting for all species and a constant periodic releasing, or immigrating, for the predator at different fixed time. We show the boundedness of the system and find conditions for the local and global stabilities of two-prey-free periodic solutions by using Floquet theory for the impulsive differential equation, small amplitude perturbation skills and comparison techniques. Also, we prove that the system is permanent under some conditions and give sufficient conditions under which one of the two preys is extinct and the remaining two species are permanent. In addition, we take account of the system with seasonality as a periodic forcing term in the intrinsic growth rate of prey population and then find conditions for the stability of the two-prey-free periodic solutions and for the permanence of this system. We discuss the complex dynamical aspects of these systems via bifurcation diagrams.

• 한국가시화정보학회지
• /
• 제14권3호
• /
• pp.51-58
• /
• 2016

New concept spark plug was developed to study its influence on the combustion characteristics of SI engine. It has pre-ignition chamber at the lower end of spark plug and flame hole, in which fresh mixture gas can be put in through the flame hole without any fuel supply system. This spark plug was tested in a single cylinder engine dynamometer for different air fuel ratio to measure the fuel consumption rate, emission gases, and MBT timing. And constant volume combustion chamber was made to understand flame characteristics of spark plug. New spark plug induced fast burn compared to the conventional spark plug and its effects were increased in lean air fuel ratio. Pre-ignition chamber spark plug with 5 holes which had adjusted size was more stable and effective in combustion performance than pre-ignition chamber spark plug with 1 hole. And its effects showed larger differences in lean air fuel ratio than stoichiometric condition. Flame kernel and flame growth process of conventional spark plug and pre-ignition chamber spark plug studied by flame visualization of schlieren method.

• Journal of Welding and Joining
• /
• 제6권4호
• /
• pp.16-26
• /
• 1988

The effect of carbon content on hot cracking of welded carbon steel was investigated Eight steel plates whose carbon content range from 0.02 to 0.23 percent were welded by autogeous gas tungsten are process. Constant strain was applied to the hot crack test specimen under the strain rate of 0.15 mm per second during welding. The hot cracking susceptibility ws high in the rnage of 0.02-0.05 and 0.12-0.23 percent carbon contents. The critical carbon content immune to hot cracking is in the range from 0.07 to 0.12 percent carbon. By electron probe microanalyser, amanganese segregation was not seen significantly in the whole carbon range. But segregation of silicon was higher in the region of low carbon contents. However, sulphur was segregated remarkably in the region betwen 0.18 and 0.23 percent carbon by peritectic reaction. Very smal lamount of dnedritic structure was observed in the region from 0.02 to 0.05 percent carbon by peritectic reaction. Very small amount of dendritic structure was observed in the region from 0.02 to 0.05 percent carbon but the predominant solidification structure was smooth by cellular growth. The higher the carbon content is, the more the columnar dendritic structure was observed.

• 대한소아치과학회지
• /
• 제21권2호
• /
• pp.577-585
• /
• 1994

The Twin Blocks technique was developed by Dr. William Clark of Scotland during the early 1980's. Twin Blocks are an uncomplicated system that incorporates the use of upper and lower bite blocks. These blocks reposition the mandible and redirect occlusal forces to achieve rapid correction of malocclusions. They are also comfortable and the patients wear them full-time-inducing eating time. Occlusal forces transmitted through the dentition provide a constant proprioceptive stimulus to influence the rate of growth and the trabecular structure of the supporting bone. The features of Twin Blocks mean easier and quicker treatment. The occlusal inclined plane is the fundamental functional mechanism of the natural dentition. Twin blocks are bite blocks that effectively modify the occlusal inclined plane to induce favorably directed occlusal forces by causing a functional mandibular displacement. Upper and lower bite blocks interlock at a $45^{\circ}$ angle and are designed for full-time wear to take advantage of all functional forces applied to the dentition including the forces of mastication. The patients who were treated with modified Twin Blocks, and following results were observed: 1. Large overjet and deep overbite were corrected. 2. Class II molar relationship was changed into Class I. 3. Labial inclination of upper incisors was corrected by adjustment of labial bow of upper bite block. 4. The profiles of two patients were improved by anterior displacement of mandible.

• 콘크리트학회논문집
• /
• 제19권5호
• /
• pp.577-584
• /
• 2007

Steel microfiber (SMF)가 알칼리-실리카 반응 (ASR)에 미치는 영향을 두 가지 종류 (부순 오팔과 직경이 일정한 pyrex 막대)의 반응 골재를 사용하여 알아보았다. ASR에 의한 균열은 기준 모르타르에서 쉽게 발견되었으나 SMF 모르타르의 균열은 아주 제한적이었다. SMF의 균열 진전 제어 메커니즘을 통하여 ASR에 의한 모르타르의 강도 저하와 팽창을 효과적으로 막을 수 있었고, ASR 생성물들의 유동성이 저하됨을 알 수 있었다. ASR 생성물의 성분을 microprobe 분석과 ICP 분광계를 이용하여 알아보았다. SMF의 구속 효과는 액체상태인 ASR 생성물의 높은 나트륨이 온과 규소이온의 농도를 초래하였으며, 높은 이온의 농도는 ASR 알칼리-실리카 반응성을 저하하는 원인으로 생각되어 진다.

• 한국해양공학회지
• /
• 제6권2호
• /
• pp.76-84
• /
• 1992

In this study, corrosion fatigue test of SAPH45 steel was performed by the use of plane behavior of base metal (BM) and heat affected zone (HAZ) of SAPH45. The main results obtained are as follows: 1) The more aspect ratio (b/t) of corner crack decreases, the more aspect ratio (b/a) takes greatly effect by corrosion. 2) The correlation between the stress intensity factor range ($\Delta$k) and crack growth rate (da/dN) for weldment in seawater is given by Paris rule as follow: da/dN=C($\Delta$K) super(m). Where m is constant, and the value is 3.82-3.84. 3) The accelerative factor ($\alpha$) of BM and HAZ under seawater is about 1.1-1.9, and ($\alpha$) of HAZ increases more and more under the low $\Delta$K region. 4) HAZ is more susceptible to corrowion than BM because of potential of electrode (E sub(c)) of HAZ becomes more less noble potential than that of BM.