• The Korea Journal of Herbology
• /
• v.24 no.1
• /
• pp.121-131
• /
• 2009

Objectives：This study was designed to investigate the effects of herbal composition and fermented Cervi Pantotrichum Cornu on the growth of longitudinal bone in the adolescent male rats. Methods： Longitudinal bone growth was measured by fluorescence microscopy. To examine the effects on the growth plate metabolism, the total height of growth plate and the induction of local insulin-like growth factor-1 (IGF-1) and bone morphogenetic protein-2 (BMP-2) were measured. Results： The herbal composition treatment enhanced longitudinal bone growth and total heght of growth plate and promoted the induction of local IGF-1 and BMP-2 of growth plate. Conclusions： This study showed that the herbal composition have the effect of bone growth in adolescent rats and might be used for the growth delayed adolescent and inherent growth failure patient.

• The Korea Journal of Herbology
• /
• v.24 no.3
• /
• pp.69-77
• /
• 2009

Objectives : This study was designed to investigate the effects of horse bone powder extract on the growth of longitudinal bone in adolescent male rats. Methods： Longitudinal bone growth was measured by fluorescent microscopy. To examine the effects on the growth plate metabolism, the total height of growth plate, the induction of local insulin-like growth factor-1 (IGF-1), and bone morphogenetic protein-2 (BMP-2) were measured. Results： Horse bone powder extract enhanced longitudinal bone growth and total height of the growth plate. Also, it promoted the induction of local IGF-1 and BMP-2 of the growth plate. Conclusions： This study shows that the horse bone powder extract effects longitudinal bone growth in adolescent rats and might be used for both stunted adolescents and inherent growth failure patients.

• The Korea Journal of Herbology
• /
• v.24 no.4
• /
• pp.149-157
• /
• 2009

Objectives : This study was designed to investigate the effects of Cheunggyeongsamul-tang extract on the growth of longitudinal bone in adolescent female rats. Methods : Longitudinal bone growth was measured by fluorescent microscopy. To examine the effects on the growth plate metabolism, the total height of growth plate, the induction of local insulin-like growth factor-1 (IGF-1), IGF-1 receptor, bone morphogenetic protein-2 (BMP-2), BMPR-1A, indian hedgehog (IHH), and parathyroid hormone-related protein (PTH-rP) were measured. Results : Cheunggyeongsamul-tang extract enhanced longitudinal bone growth and total height of the growth plate. Also, it promoted the induction of local IGF-1, BMP-2, IHH and PTH-rP of the growth plate. Conclusions : This study shows that the Cheunggyeongsamul-tang extract effects longitudinal bone growth in adolescent rats and might be used for both stunted adolescents and inherent growth failure patients.

• Clinical and Experimental Pediatrics
• /
• v.61 no.7
• /
• pp.226-230
• /
• 2018

Purpose: This pilot study assessed changes in the growth plate and growth rates in children during a 6-month period. Methods: The study included 31 healthy children (17 boys, 14 girls) under evaluation for growth retardation. Height, weight, bone age, insulin like growth factor-1 (IGF-1), and insulin like growth factor binding protein 3 (IGF-BP3) were measured at baseline and after 6 months. In addition, the diameter, thickness, and volume of the femoral and tibial growth plates were measured using magnetic resonance imaging. Results: The mean bone age in boys and girls was 11.7 and 10.7 years, respectively. In boys, height (z score) (-0.2 vs. 0.0), weight (z score) (0.8 vs. 1.1), body mass index (BMI) (z score) (1.27 vs. 1.5), IGF-1 (ng/mL) (343.6 vs. 501.8), and IGF-BP3 (ng/mL) (5,088.5 vs. 5,620.0) were significantly higher after 6 months. In girls, height (z score) (-1.0 vs. -0.7), weight (z score) (-0.5 vs. 0.1), BMI (z score) (-0.02 vs. 0.3), IGF-1 (ng/mL) (329.3 vs. 524.6), and IGF-BP3 (ng/mL) (4,644.4 vs. 5,593.6) were also significantly higher after 6 months. In both sexes, the mean diameter and volume of the femoral and tibial growth plates were significantly increased 6 months later. Conclusion: No significant correlation was found between changes in the growth plate and clinical parameters in children with growth retardation in this study, other than correlations of change in femoral diameter with weight and BMI. A larger, long-term study is needed to precisely evaluate the correlation between change in the growth plate and growth.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.4
• /
• pp.440-447
• /
• 1999

The frosting characteristics on the vertical parallel plates with three cooling plates were experimentally investigated. The experimental parameters were the cooling plate temperature, the air humidity, the air temperature, the air Reynolds number, and the location. The frosting conditions were limited to air temperatures from 10 to $15^{\circ}C$ , air Reynolds numbers from 1600 to 2270, air humidity ratios from 0.00275 to 0.0037kgw/kga and cooling plate temperatures from -10 to $-20^{\circ}C$. Frost growth and density toward the front of the plate were more thick and dense than toward the rear. Frost growth increased with decreasing plate temperature and increasing humidity. In the conditions of the laminar flow, dew point below $0^{\circ}C$and non-cyclic frosting period, frost thickness increased with increasing air temperature. The reason of increasing frost thickness with increasing air temperature was sublimation-ablimation process. The average growth thickness along the locations showed little dependence on the Reynolds numbers.

• Journal of the Korean Ceramic Society
• /
• v.24 no.5
• /
• pp.461-469
• /
• 1987

Single crystals of Mn-Zn Ferrite were grown by slow cooling method using Na2B4O7 as flux agent. The effects of flux content and cooling rate on the types of crystals, and the relation between supersaturation and growth mechanism were studied. As a result, the types of grown crystals occurred as plate, hopper and octahedral crystals. The occurrence of these crystal types was dependent on flux content. The habit was found to correlate with the growth rate and supersaturation. The lateral growth of a dendritic crystal is related to the twin layer. The growth of crystals from borax melts mainly occurred by the layer-spreading growth following corner and edge nucleation caused by high supersaturation in the melt. Especially, the plate crystals were produced on top of the melts. The hopper and octahedral crystals occurred at lower supersaturation than the plate crystals.

• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.292-298
• /
• 2001

An experimental investigation of the effect of composite patching repair was conducted to characterize the fatigue crack growth behavior in thick A16061-T6 (6mm) panels with single bonded patch by fiber reinforced composite patch. Four patch lengths and no patch plate were examined. An analytical procedure, involving three-dimensional finite element method having three layers to model cracked aluminum plate, epoxy by adhesive and composite patch, is calculated the stress intensity factors. From the calculated stress intensity factors, the fatigue crack growth rates are obtained. At the single patching type, different fatigue crack growth ratios through the plate thickness were investigated by using the experimental and analytical results. The results demonstrated that there was a definite variation in fatigue life depending on the size of composite patch. While crack reached the patch end, retardation of crack growth was also revealed in the bonded repair.

• Korean Journal of Food Science and Technology
• /
• v.35 no.4
• /
• pp.702-707
• /
• 2003

This study was conducted to evaluate the effect of a growth-stimulating material (GSM) containing Eleutherococcus senticosuson on the longitudinal bone growth. The effects of GSM on proliferation zone and IGF-1 mRNA expression in rat growth plate, IGF-1 mRNA expression in MG-63 osteoblast and Hep-G2 hepatocyte, and bone growth of mouse tibia were studied. GSM significantly increased the proliferation zone in growth plate of proximal tibia (P<0.001) and the IGF-1 mRNA expression in growth plate was also increased (P<0.01). Treatment of GSM to MG-63 osteoblast and Hep-G2 hepatocyte also increased IGF-1 mRNA expression more than twice. In addition, bone mineral density of mouse tibia was significantly increased by GSM (P<0.05). Therefore, it was shown that GSM has an activity of bone growth promotion by increasing the expression of IGF-1, a major bone growth factor.

• Journal of Periodontal and Implant Science
• /
• v.26 no.1
• /
• pp.143-160
• /
• 1996

The purpose of this study was to evaluate the response in aspect of attachment and growth rate of osteoblasts and growth rate of osteoblasts and human gingival fibroblasts to the commercially pure titanium(CP titanium)and titanium alloy(Ti-6AI-4V) that are used widely as implant materials, and to obtain the basic information to ideal implant materials. In the studly, commercially pure titanium in first test group, titanium alloy(Ti-6AI-4V) in second test group, cobalt-chrome-molybdenum alloy(Co-Cr-Mo alloy) in positive control group, and tissue culture polystyrene plate in negative control group were used. The results of this study were as follows. 1. Bone marrow cells cultured on CP titanium and Ti-6Al-4V showed significantly greater attachment and growth rate(p(0.05) compared to Co-Cr-Mo alloy in each time. 2. There were no significant differences(p>0.05) in attachment and growth rate of bone marrow cells cultured on CP titanium and Ti-6AI-4V or tissue culture plate. 3. Most bone marrow cells cultured on CP titanium, Ti-6Al-4V and tissue culture plate were attached well to each substratum in first 2days, and then, grew at higher growth rate. On the other hand, some cells cultured on Co-Cr-Mo alloy failed to attach in first 2 days, and then, attached cells grew at lower growth rate than other groups. 4. Attachment and growth rates of gingival fibroblasts cultured on CP titanium and Ti-6Al-4V showed no significant differences(p>0.05) compared to Co-Cr-Mo alloy in 2 days, but significantly greater increase(p<0.05) in 5 and 9 days. 5. There were no significantly differences(p>0.05) between growth rates on gingival fibroblasts cultured on CP titanium, Ti-6Al-4V and tissue culture plate in 2 and 5days, but a significant lower growth rate(p<0.05) on CP titanium and Ti-6Al-4V versus tissue culture plate. 6. Some gingival fibroblasts cultured on all specimen groups failed to attach, but attached cells grew well, especially on CP titanium, Ti-GAl-4V and tissue culture plate. 7. There were no significant differences(P>0.05) between growth rates of both bone marrow cells and gingival fibroblasts cultured on CP titanium and Ti-6AI-4V. As a result of this study, both commercially pure titanium and Ti-6AI-4V showed excellent biocompatibility and there was no significant difference in the cellular response to the both metals. Bone marrow cells cultured on each substratum showed significantly greater growth rate and responded sensitively to cytotoxic effects of metal surfaces compared to gingival fibroblasts. Considering cell response to the substrate, it was likely that the composition itself of titanium metals have no significant effect on the biocompatibility. Further study need to be done to evaluate the influence of surface characteristics on cellular responses.

• Journal of the Korean Ceramic Society
• /
• v.54 no.3
• /
• pp.167-183
• /
• 2017

Zinc oxide (ZnO) is one of the most versatile semiconductors, and one-dimensional (1D) ZnO nanostructures have attracted significant interest for use in ultraviolet (UV) lasers, photochemical sensors, and photocatalysts, among other applications. It is known that 1D ZnO nanowires can be fabricated readily owing to the anisotropic growth of ZnO along the [0001] direction. However, this type of growth results in a decrease in the surface area of the (0001) plane, which plays a vital role not only in UV lasing but also in the photocatalytic process. Thus, we attempted to synthesize ZnO crystals with an increased polar surface area by controlling the crystal growth process. The purpose of this review is to propose a simple route for the synthesis of plate-like ZnO crystals with highly enhanced polar surfaces and to explore their feasibility for use in UV lasers as well as as a photocatalyst and antibacterial agent. In addition, we highlight the recent progress made in the pilot-scale synthesis of plate-like ZnO crystals for industrial applications.