• 대한기계학회논문집
• /
• 제18권7호
• /
• pp.1722-1729
• /
• 1994

At early stage of creep-fatigue crack growth tests, initial transient behavior which implies high crack growth rate has been generally observed by some researchers. Since the influence of the initial transient crack growth behavior on the remaining life of components is significant, cause of it should be further studied. In this study, characteristics of the initial transient behavior of 1Cr-1Mo-0.25V steel is studied experimentally by performing creep-fatigue crack growth tests at $538^{\circ}C$ in air under trapezoidal waveshapes. It is verified that the cause of the initial transient behavior is not high ${(C_t)}_{avg}$ values due to the small scale creep condition at the early stage of test, but oxidation-dominated crack growth mechanism during the transient period which is different from the creep-dominated crack growth mechanism in steady crack growth period.

• 한국해양공학회지
• /
• 제7권1호
• /
• pp.147-155
• /
• 1993

The effect of stress waveforms on corrosin fatigue and the role of dissolution mechanism in 3NilCr steel and 20Ni maraging steel have been investigated in aerated 3% NaCl solution and synthetic seawater under sinusoidal, triangular, square, positive sawtooth, negative sawtooth, and trapezoidal stress waveforms with open circuit at frequency of 1Hz and stress ratio of 0.1. The crack growth rates under square waveform were substantially lower than under sinusoidal and triangular waveforms, but the crack growth rates under sinusoidal waveform were slightly higher under triangular waveform. For a given frequency the growth rates under the positive sawtooth waveform are higher than those under the negative sawtooth waveform. The fatigue crack growth rates of most specimens were in good agreement with the values calculated by the model based on the dissoultion mechanism.

• 한국분말재료학회지
• /
• 제24권2호
• /
• pp.141-146
• /
• 2017

$Bi_2Te_3$ powders are recovered by wet chemical reduction for waste n-type thermoelectric chips, and the recovered particles with different morphologies are prepared using various surfactants such as cetyltrimethylammonium bromide (CTAB), sodium dodecylbenzenesulfonate (SDBS), and ethylenediaminetetraacetic acid (EDTA). When citric acid is added as the surfactant, the shape of the aggregated particles shows no distinctive features. On the other hand, rod-shaped particles are formed in the sample with CTAB, and sheet-like particles are synthesized with the addition of SDBS. Further, particles with a tripod shape are observed when EDTA is added as the surfactant. The growth mechanism of the particle shapes depending on the surfactant is investigated, with a focus on the nucleation and growth phenomena. These results help to elucidate the intrinsic formation mechanism of the rod, plate, and tripod structures of the $Bi_2Te_3$ recovered by the wet reduction process.

• 대한기계학회논문집
• /
• 제19권1호
• /
• pp.122-131
• /
• 1995

The research trends for metal matrix composites have been on basic mechanical properties, fatigue behavior after aging and fractographic observations. In this study, the fatigue crack initiation as well as the fatigue crack growth behavior and the fracture mechanism were investigated through observations of the fracture surface on silicon carbide particles reinforced aluminum metal matrix composites(SiCp/Al). Based on the fractographic study done by scanning electron microscope and replica, crack growth path model and fracture mechanism are presented. The mechanical properties, such as the tensile strength, yield strength and elongation of SiCp/Al composites are improved in a longitudinal direction, however, the fatigue life is shorter than the basic Al6061 alloys. From fractographic observations, it is found that the failure mode is ductile in basic Ai6061 alloys. And because some SiC particles were pulled out from the matrix and a few SiC particles could be seen on the fracture surface of SiCp/Al, crack growth paths are believed to follow the interface of the matrix and its particles.

• 한국세라믹학회지
• /
• 제31권3호
• /
• pp.249-256
• /
• 1994

By surface structure and X-ray topographic observation, growth mechanism of NAB single crystal grown by TSSG technique using a BaB4O7 flux was studied. Surface structure of grown crystals were investigated by optical microscope. Growth history and crystal defects included within grown crystal were investigated using X-ray topography. The {001} faces were grown by 2-D nucleation growth. As decreasing cooling rate, growth mechanism of {111} and {11} was changed from 2-D nucleation growth to the growth by screw dislocation. Only surface striations developed parallel to a-axis were observed on {010} faces. Growth sector of NAB crystals were divided into {001}, {111}, {010}, {021}, {11}. The inclusion which was usually trapped between {001} faces was investigated.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.154-155
• /
• 2006

This study investigated a mechanism for controlling the shape of Cu nanocrystals fabricated using the polyol process, which considers the thermodynamic transition from a facetted surface to a rough surface and the growth mechanisms of nanocrystals with facetted or rough surfaces. The facetted surfaces were stable at relatively low temperatures due to the low entropy of perfectly facetted surfaces. Nanocrystals fabricated using a coordinative surfactant stabilized the facetted surface at a higher temperature than those fabricated using a non-coordinative surfactant. The growth rate of the surface under a given driving force was dependent on the surface structure, i.e., facetted or rough, and the growth of a facetted surface was a thermally activated process. Surface twins decreased the activation energy for growth of the facetted surface and resulted in rod- or wire-shaped nanocrystals

• 한국결정성장학회지
• /
• 제23권2호
• /
• pp.93-100
• /
• 2013

지구 온난화의 대표적인 주범인 $CO_2$를 저감하기 위하여 많은 연구가 진행되고 있다. 특히 가스 하이드레이트 형성원리를 이용한 $CO_2$ 분리 및 저장 공정이 주목을 받고 있다. 본 연구는 필름형 $CO_2$ 하이드레이트의 결정성장 거동에 관하여 성장 메커니즘을 규명하였다. 다양한 압력조건에서 반회분식 교반 반응기를 이용하여 $CO_2$ 하이드레이트를 형성시켰으며 객체가스의 용해도 차이를 최소화하기 위하여 모든 실험에서 온도는 고정하였다. 공급된 가스는 순도 99.999 %의 $CO_2$ 가스를 사용하였고, CCD 카메라(Nikon DS-5M/Fi1/2M-U2)가 장착된 광학현미경을 사용하여 관찰 결과를 실시간 기록하였다. 실험에 적용되는 압력에 따라서 하이드레이트 성장형태와 성장속도는 매우 큰 차이를 보였다. 특히 2.0 MPa 이상의 압력에서 가장 큰 변화를 관찰하였으며, 이것은 $CO_2$의 농도 차이와 모세관 힘에 의한 것으로 사료된다.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권8호
• /
• pp.325-334
• /
• 2021

The study investigates the effectiveness of the macroprudential policy on credit growth in Vietnam. The authors use the logic of the transmission mechanism of macroprudential policy on credit growth. Research variables include economic growth, inflation, interest rate, and quarterly bank-level data from 28 commercial banks in Vietnam during 2011-2018. The results reveal that: (i) GDP growth had a positive impact on credit growth of small banks but had no impact on large banks, (ii) Domestic Systemically Important Banks (D-SIBs) and small banks respond differently to macroprudential measures of imposing different credit growth targets for different bank groups, (iii) Restrictions on foreign currency loans are found to be effective in curbing credit growth for the full sample and small banks, (iv) Inflation and economic cycle have significantly impacted credit growth at bank-level in Vietnam and (v) Interestingly, a significant positive relationship between interest rates and credit growth is found for the full sample and D-SIBs in Vietnam. The findings suggest that a stable macroeconomic environment should be good conditions for financial stability, and monetary authority should pay more attention to small banks' behaviors than D-SIBs behavior, toward such "administration" tools since small banks tend to prefer "breaking the rules" to make profits.

• 대한기계학회논문집
• /
• 제19권2호
• /
• pp.418-426
• /
• 1995

A bubble-powered microactuator is designed conceptually. And the actuation mechanism due to bubble growth and collapse is studied numerically and analytically. In this analysis, it is estimated that the time lag for bubble formation on micro line heater, the duration of the bubble growth and collapse and the pressure change in actuator due to the bubble evolution. Based on these calculations, the actuator control scheme is visualized. This actuator may be applicable to the system which needs to pump liquid correctly and regularly.

• 대한전기학회논문지
• /
• 제36권1호
• /
• pp.29-35
• /
• 1987

TPolystyrene thin films are prepared by glow discharge of sytrene monomer vapor th establish the growth mechanism of organic thin films by the plasma polymerization. As the discharge parameters, discharge current(5mA-20mA), frequency (10kHz-50kHz, 13.56MHz), gaspressure (0.2torr-1.5torr), and discharge time(2min-12min)are adopted. Plasma-polymerized filmsof styrene vapor are identified as polystyrene by IR spectra. The thickness of plasma-polymerized films increases with gas pressure, frequency and discharge current in the region of the low frequency and below the allowed gas pressure where the polymerization occurs. It is suggested that the growth mechanism can be explained by ionic reaction in d.c. and low frequency region, and by radical reaction in high frequency region.