• Asian Journal of Turfgrass Science
• /
• v.5 no.2
• /
• pp.95-114
• /
• 1991

This paper was designed to estimate the interaction of the first productivity, light conditions and to analyze the ecophysiological productivity, growth characteristics grown under various shading conditions in Zoysia japonica . The results summarized this experiment were as follows; 1.After transplanting the grass, increasing rate of leaf number and total leaf length was remarkahly high at the early growth stage in the control and the 30% shading plot. 2.The increasing rate of leaf area ratio (LA R) in all the experimental plot was remarkable high at the early growth stage after transplanting the grass. Especially, the control and 30% shading plot in compared with another plots, were remarkably high at rate of leaf area. 3.The length and the node number of rhizome in the control and 30% shading plot were also high and the difference was significantly large by the growth stage. 4.Chlorophyll content was very high at 36days after transplanting and then decreased. Increasing rate of shade resulted in its low content. The rate of chlorophyll a to b was decreased by in-creasing rate of shade. 5.The content of soluble sugar in the control and 30% shading plot was low at the early growth after transplanting and high at the late growth stage. Its content in the plot of 70% shading was remarkably low throughout the growth stage. 6.The increasing rate of standing plant in all the experimental plots was high at the early growth stage after transplanting. Increasing rate of shade was typically low through all the growth stage.

• Journal of the Korean Ceramic Society
• /
• v.33 no.11
• /
• pp.1203-1208
• /
• 1996

Crack growth tests on silicon nitride have been made to clarify the crack growth characteristics under static and cyclic loading. Under constant K(K: stress intensity factor) static loading the crack growth rate in silicon nitride decreases with increasing crack extension and is finally arrested. The cack growth resistiance is largely reduced by the application of stress cycling and though the crack growth resistiacne increases with increasing of crack extension the increasing rate is much smaller under cyclic loading than under static loading.

• Journal of the Korean Ceramic Society
• /
• v.34 no.8
• /
• pp.791-796
• /
• 1997

The influence of Ti/Sr ratio on abnormal grain growth of Nb-doped SrTiO3 was investigated. For specimens which were isothermally sintered at temperatures above 144$0^{\circ}C$, the nucleation and growth rates of abnormal grain growth were decreased with increasing Ti/Sr ratio. But the onset time of abnormal grain growth was increased with increasing Ti/Sr ratio. The cross-section of abnormally grown grains was mostly hexagonal. When the specimens were quenched in air after they reached their setting temperatures at a heating rate of 3$^{\circ}C$/min, the onset temperature of abnormal grain growth was increased with increasing Ti/Sr ratio and the final grain size was independent of Ti/Sr ratio. The cross-section of abnormally grown grains was mostly rectangular.

• Journal of Ocean Engineering and Technology
• /
• v.14 no.2
• /
• pp.99-105
• /
• 2000

This paper describes the effect of specimen size on fatigue crack growth rate for the offshore structural high-tensile-strength steel BS4360 and machine structural steel SM45C. The purpose of the present study is to investigate the effect of stress ratio aspect ratio specimen width and specimen thickness of the fatigue crack growth behavior. Compact tension specimens with a LT orientation for BS4360 and SM45C steels were used, All testing was done at constant stress intensity factor range controlled fatigue crack growth condition. The investigation demonstrates that the fatigue crack growth rate is increased with increasing stress ratio and specimen thickness and is decreased with increasing specimen width. The fatigue crack growth rate is unaffected by aspect ratio until a/W=0.50 but is increased by increasing spect ratio from a/W=0.55.

• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.4
• /
• pp.351-362
• /
• 1998

Microbial growth efficiency in the rumen was studied in sheep given hourly, 31.25 g oaten chaff with either 0.31 and 0.88 g urea or 1.88 and 5.63 g casein (exp. 1) and 33.33 g oaten chaff with 1.04 casein or 0.3, 0.6 and 0.9 g urea or the mixture of the casein and urea (exp. 2). Concentrations of ruminal fluid ammonia increased with increasing nitrogenous supplements. Organic matter digestibility in sacco in the rumen was not different irrespective of N sources. Isoacids and valeric acid increased with increasing ingested casein but decreased with increasing urea intake. Peptide and amino acid pools in ruminal fluid increased with increasing ammonia concentrations (exp. 2) suggesting that proteolytic activity and transportation of peptides and amino acids across microbial membrane of rumen microbes may be regulated by the metabolite mechanism (intracellular amino acids and $NH_4{^+}$, respectively). Densities of total viable and cellulolytic bacteria in ruminal fluid increased with increasing ammonia levels but that of small Entodinia decreased. The density of fungal sporangia growth on oat leaf blades decreased with increasing ammonia concentrations but appeared to remain constant in the presence of casein. Efficiency of net microbial cell synthesis was 15-28% higher when ammonia concentrations increased from 100 to above 200 mg N/l regardless of N sources. In conclusion, supplementation of preformed protein had no effect on rumen digestion and microbial growth efficiency. This could not be accounted for its effect on ruminal fluid ammonia. Increased microbial growth efficiency with increasing ammonia levels may be due to a reduction in the turnover of microbial cells within the rumen.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.4
• /
• pp.440-447
• /
• 1999

The frosting characteristics on the vertical parallel plates with three cooling plates were experimentally investigated. The experimental parameters were the cooling plate temperature, the air humidity, the air temperature, the air Reynolds number, and the location. The frosting conditions were limited to air temperatures from 10 to $15^{\circ}C$ , air Reynolds numbers from 1600 to 2270, air humidity ratios from 0.00275 to 0.0037kgw/kga and cooling plate temperatures from -10 to $-20^{\circ}C$. Frost growth and density toward the front of the plate were more thick and dense than toward the rear. Frost growth increased with decreasing plate temperature and increasing humidity. In the conditions of the laminar flow, dew point below $0^{\circ}C$and non-cyclic frosting period, frost thickness increased with increasing air temperature. The reason of increasing frost thickness with increasing air temperature was sublimation-ablimation process. The average growth thickness along the locations showed little dependence on the Reynolds numbers.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.3
• /
• pp.76-88
• /
• 1997

Constant .DELTA.K fatigue crack growth rate experiments were performed by applying an intermediate single and multiple overload for structural steel, SM45C. The purpose of the present study is to investigate the influence of multiple overloads at various stress intensity factor ranges and the effect of statistical variability of crack retardation behavior. The normalized delayed load cycle, delayed crack length and the minimum crack growth rate are increased with increasing baseline stress intensity factor range when the overload ratio and the number of overload application were constant. The crack retardation under low baseline stress intensity factor range increases by increasing the number of overload application, but the minimum crack growth rate decreases by increasing the number of overload application. A strong linear correlation exists between the minimum crack growth rate and the number of overload applications. And, it was observed that the variability in the crack growth retardation behavior are presented, the probability distribution functions of delayed load cycle, delayed crack length and crack growth life are 2-parameter Weibull. The coefficient of variation of delayed load cycle and delayed crack length for the number of 10 overload applications data are 14.8 and 9.2%, respectively.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.5
• /
• pp.29-35
• /
• 2021

This study discusses the effect of human capital and technology on economic growth in Indonesia using annual time series data over the 35-year research period (1984-2019). This study uses an autoregressive distribution gap to the cointegration approach to understanding the relationship between human capital, technology, and economic growth. Human capital is inherent in humans and becomes capital in providing the best performance that has an impact on their own income. We use the human capital framework in this study where education is one mechanism to increase human capital. Based on the results of our estimation, we find that the increase in human capital using the education mechanism affects economic growth. This shows the role of human capital investment is very important in economic growth. Technology shows a significant positive effect on economic growth. Increasing human resources and technology are important factors in efforts to increase economic growth in Indonesia. Educational development is the key to the success of increasing human capital and technological development because education plays a role in improving the quality of human resources. Increasing human resources here is in the form of increased knowledge, mastery of technology, innovation, and the ability to develop technology to encourage technology development.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.928-932
• /
• 1996

Single overload fatigue tests with overload sizes ranging from 50% and 100% have been performed to investing ate the fatigue crack growth retardation behavior. A modified and experimental method of Willenborg's model for prediction of crack growth retardation behavior has been developed, based on evaluations of equivalent plastic zone size (EPZS) changing its size along the overload plastic zone boundary. The minimum crack growth rates of each overload size are linearly decreased with overload size increasing, but fatigue lives extended by single overload are increasing much more unlike the crack growth rates. Comparisons of crack growth behavior predicted by EPZS model and Willenborg model have shown that the EPZS model accounts for overload effects better than Willenborg model. These effects include delayed retardation, large retardation region, minimum crack growth rate, and the increase rate of crack growth rate in the region crack growth rate recovered.

• Asian Journal of Turfgrass Science
• /
• v.13 no.1
• /
• pp.1-20
• /
• 1999

This study was carried out to investigate the interaction between productivity and light condition and to analyze the material productivity and productive charactaristics under different hours of light in Zoysia japonica. 1. Rate increasement of leaf number and total leaf length was remarkably high at the early growth stage in the control and 9 hour light treatment. The rate gradually decreased as growth proceeded. But 3 hour treatment was very low in the rate from its early growth stage through the whole test period. 2. The increasing rate of leaf area ratio (LAR) in all the experimental plots was remarkably high at the early growth stage after transplanting the grass. The shorter photoperiod resulted remarkable lower increasement of LAR. 3. The rhizome growth rate of the 9 hour photoperiod was high contrast to the 3 hour photoperiod treatment. The increasing rate of node number was also showed similar trend. 4. Chlorophyll content was very high at the 36 days after transplanting and then decreased gradually. Chlorophyll content on 3 hours photoperiod plot severely decreased. The ratio of chlorophyll a to b was decreased significantly at short day treatment. 5. The content of soluble sugar was increased at shorter photoperiod. The highest ratio of sugar content was on August, 28 by HPLC method. Such a result was attributed to accumulation of sugar in spite of low synthesis of ploysacchrides, translocation by low consumption. 6. The increasing rate of standings in all light treatment was high at the early growth stage after transplanting. Short photoperiod treatment by 3hour showed especially low prganic productivity on Zoysia japonica.