• Asian-Australasian Journal of Animal Sciences
• /
• 제20권1호
• /
• pp.45-51
• /
• 2007

A growth trial (Expt. 1) and an in vitro fermentation experiment (Expt. 2) were conducted to determine the response of growth performance, cecal fermentation characteristics and in vitro gas production to incremental levels of substitution of digestible fiber for lignified fiber in the diet of weaned rabbits. Three diets, formulated by substituting soyhulls (SH; used as digestible fiber source) for soybean straw (used as lignified fiber source) at substitution levels of 0, 25 and 50%, were used in a factorial design. In the growth trial (Expt. 1), increasing levels of SH substitution resulted in a quadratic increase in daily body weight gain rate (p<0.04) and feed conversion efficiency (p<0.02), but in a numerical decrease in dietary DM intake (p=0.15). When SH were included in the diet at 25% substitution level, rabbits had the highest rate of liveweight gain and feed conversion efficiency. As SH substitution level increased, pH values and ammonia-N of cecal contents linearly (p<0.001) decreased, but total VFA concentration linearly (p<0.03) increased. With incremental levels of SH substitution, the percentage of acetate and butyrate linearly (p<0.05) reduced, but the percentage of propionate and minor acids linearly (p<0.03) increased. Increasing the SH substitution levels tended to increase incidence of diarrhea. In the in vitro fermentation experiment (Expt. 2), regardless of origin of substrates fermented, increasing SH substitution level resulted in increased maximal gas production (p<0.001) and shortened gas production lag time, but had no effect on gas production rate (p>0.2). These observations suggest that incrementally feeding SH to rabbits could stimulate their cecal microbial activity, allowing cecal fermentation to shift towards favoring fiber digestion. In conclusion, digestible fiber from soyhulls may partially substitute for more lignified fiber, soybean straw, without having an adverse effect on cecal fermentative and microbial activity and growth performance. For growing rabbits, about 73% of total dietary NDF should be supplied by effective NDF, the remainder could come from digestible NDF, such as soyhulls.

• 한국환경농학회지
• /
• 제1권2호
• /
• pp.123-128
• /
• 1982

수도(水稻)(서광(曙光)벼)의 활착기(活着期), 분고최성기(分藁最盛期), 유수형성기(幼穗形成期), 출수기(出穗期)때에 ozone가스 0.5ppm을 4시간(時間)씩 가스접촉실내(接觸室內)에서 접촉(接觸)시켜 가스접촉후(接觸後)에 나타나는 피해증상(被害症狀), 피해엽률(被害葉率), 엽록소함양(葉綠素含量) 및 peroxidase의 활성(活性)을 조사(調査)한 결과(結果)는 다음과 같다. 1) Ozone 가스에 의(依)한 수도엽(水稻葉)의 피해증상(被害症狀)은 은백색(銀白色)의 미세(微細)한 반점(斑點)이 엽맥(葉脈)을 따라 발생(發生)되며, 적갈색(赤褐色)${\sim}$암갈색(暗褐色)의 반점(斑點)이 발생(發生)되는 경우(境遇)도 있었다. 2) Ozone가스 접촉(接觸)에 의(依)한 수도(水稻)의 생육시기별 감수정도(生育時期別 減收程度)는 분고최성기(分藁最盛期)>유수형성기(幼穗形成期)>활착기(活着期)>출수기(出穗期)의 순(順)이었다. 3) Ozone가스 접촉(接觸)에 의(依)한 수도(水稻)의 생육시기별 피해엽률(生育時期別 被害葉率) 및 엽록소감소정도(葉綠素減少程度)는 분고최성기(分藁最盛期)>활착기(活着期)>유수형성기(幼穗形成期)>출수기(出穗期)의 순(順)이었다. 4) Ozone가스 접촉(接觸)으로 수도엽중(水稻葉中)의 실소함량(室素含量)이 감소(減少)되었고 도체엽중 실소함량(稻體葉中 室素含量)이 높은 시기(時期)에 피해(被害)가 컷다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 춘계학술발표회 논문집
• /
• pp.211-212
• /
• 2012

ZnO submicron particles were grown on Au-catalyzed Si substrate by a vapor phase transport (VPT) growth process under different mixture gas ratio at growth temperature of $900^{\circ}C$. The structural and optical properties of the ZnO submicron particles were investigated by field-emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), and photoluminescence (PL). The ZnO submicron particles could be clustered with the $O_2/Ar$ mixture gas ratio(%) higher than 10%, and it was mainly determined by the gas ambient. Particularly, when the $O_2/Ar$ mixture gas ratio was 30%, it was observed the ZnO submicron particles with diameters in the range of 125 to 500 nm and the narrowest full width at half maximum (FWHM) of XRD and PL spectra with $0.121^{\circ}$ and 92 meV, respectively. It was found that the structural and optical properties of the ZnO submicron particles were improved with increasing the $O_2/Ar$ mixture gas ratio through the XRD and PL spectra.

• 대한기계학회논문집A
• /
• 제26권2호
• /
• pp.365-373
• /
• 2002

For gas turbine engines, the safe life methodology has historically been used fur fatigue life management of failure critical engine components. The safe retirement limit is necessarily determined by a conservative life evaluation procedure, thereby many components which have a long residual life are discarded. The objective of this study is to introduce the damage tolerant design concept into the life management for aircraft engine component instead of conservative fatigue life methodology which has been used for both design and maintenance. Crack growth data were collected on a nickel base superalloy which have been subjected to combined static and cyclic loading at elevated temperatures. Stress analysis fur turbine disk was carried out. The program for computing creep-fatigue crack growth was developed. The residual lifes of turbine disk component under various temperatures and conditions using creep-fatigue crack growth data were estimated. As the result of analysis, it was confirmed that retirement fur cause concept was applicable to the evaluation of residual life of retired turbine disk which had been designed based on the conventional fatigue life methodology.

• 환경위생공학
• /
• 제15권1호
• /
• pp.39-45
• /
• 2000

The purpose of this study was conducted to indentified the fixing quality of $CO_2$, the most important greenhouse effect gas, by microalgae Chlorella ellipsoidea in batch test apparatus. The glass flask of $1.4{\ell}$ culture media which was saturated with 99.99% pure $CO_2$ gas was setted water bath of $25^{\circ}C$, 5000Lux, and seeded 100$m\ell$ algae liquid. We checked the change of inorganic carbon concentration and algae population with time in culture media. The result were next: the growth of algae population relied on aquatic IC(inorganic carbon) concentration. And the pH was increased with decrease of IC concentration. The growth of algae population had positive correalation with $CO_2$ concentration, and the coefficient of correlation was 0.982. The specific growth rate($\mu$) of Chlorella ellipsoidea was 1.104/d, the maximum specific growth $rate({\mu}_{max}$) of 9.21/d, and helf velocity constant($K_s$) of $259mg/{\ell}$ by Monod equation.

• 한국재료학회지
• /
• 제15권5호
• /
• pp.323-333
• /
• 2005

Effects of gases to growth of $SiO_2$ nanowires were characterized. $N_2$, Ar, and $O_2$ gas's effect were determined. $SiO_2$ nanowires growth scheme was varied by kind and flow rates of gases because of amounts of $O_2$. Flow rates of gases and kind of substrates affected nanowires' diameters, lengths and morphologies of grown nano wires. With increasing flow rates of gases, nanowire's diameter increased because of additional VS and SLS reactions. By TEM characterization, We knows that, grown $SiO_2$ nanowires on Si substrate showed two shell structures. These shapes of nanowires were formed by reaction of additional SLS growth. Grown $SiO_2$ nanowires showed blue luminescence by PL characterization These Blue luminescence was due to quantum confinement effect and oxygen vacancies in the nanowires.

• 동력기계공학회지
• /
• 제15권6호
• /
• pp.73-80
• /
• 2011

The experimental investigation focuses on an influence of artificial aging time in longitudinal butt welded Al 6013-T4 aluminum alloy on the fatigue crack growth resistance. The preferred welding processes for this alloy are frequently tungsten inert gas welding (TIG) process due to its comparatively easier applicability and better weldability than other gas metal arc welding. Fatigue crack growth tests were carried out on compact tension specimens (CT) in longitudinal butt TIG welded after T82 heat treatment was varied in three artificial aging times of 6 hours, 18 hours and 24 hours. Of the three artificial aging times, 24 hours of artificial aging time are offering better resistance against the growing fatigue cracks. The superior fatigue crack growth resistance preferred spatial variation of materials within each specimen in the Paris equation based on reliability theory and fatigue crack growth rate by crack length are found to be the reasons for superior fatigue resistance of 24 hours of artificial aging time was compared to other joints. The highest of crack propagation resistance occurs in artificial aging times of 24 hours due to the increase in grain size (fine grained microstructures).

• 한국환경복원기술학회지
• /
• 제7권1호
• /
• pp.110-115
• /
• 2004

This experiment was conducted to investigate the effect of light intensities on the growth responses, carbohydrate contents and the characteristics of leaf gas exchange in Miscanthus sinensis and Pennisetum purpurascens. The plant height and leaf length were increased to about 30% in the sun. However, those were reduced severely in the shade, and leaf necrosis was also observed. The representative growth index and the dry weight of 2 species were 50% higher than shade and the rate was reduced according to the decrease of light intensities. Total carbohydrate contents showed very similar changes to that of dry weight. However, any notable influences were observed at above the light intensities of 250~500${\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ in the half shade. The size of spikes and the earliest spiking appeared in the sun and the spike color was decolorized as decreased in light intensities, irrespective of species. Photosynthetic rate of 2 species was 2 times higher in the sun than those in the shade, and it showed the typical photoresponses of sun plant. Stomatal conductances and intercelluar $CO_2$ concetration showed similar changes to that of photosynthetic rate. On the contrary, vapor pressure deficit was increased more in the shade than in the sun.

• 한국표면공학회지
• /
• 제30권2호
• /
• pp.111-120
• /
• 1997

The growth kinetion of $CuCl_x$ layer on Cu was investigated using $Cl_2$ gas with/without plasma. The etching kinetics ofit was also studied, in which PEt3 gas as well as $Cl_2$ gas were used. when plasma and DC bias were applied, not only the growth rate of $CuCl_x$ layer but also the surface concentration of Cl in $CuCl_x$ layer drastically increased. The growth mode is divided into three regimes, where the thinkness $CuCl_x$ layer ise proportional to t, lo9g $T^{1/2}$ , respectively, whether plasma, is applied or not. These three regime. It is also identified that the eath rate of Cu is drastically increased as the $Cl_2$ pressure is increased. However, when plasma and DC bias were applied, the etching rate is decreased, and ClCu-P-U layer is formed. in addition, as the etching time is increased, the surface concentration of Cl is increased and $CuCl_2$ formed partially.

• Journal of Plant Biology
• /
• 제18권4호
• /
• pp.155-160
• /
• 1975

Growth responses of lettuce seeds germinated in aqueous solutions of $SO_2$ were investigated for mode of action studies of this gas. The concentration and pH of $SO_2$ solution greatly affected the growth of germinating seeds. Root growth was more sensitive to $SO_2$ than hypocotyl growth. The sensitivity of total seedling growth lay between root and hypocotyl growth. Growth inhibition of germinating seeds appeared more serioius when $SO_2$ was added during the early stage of germination.