• Journal of Animal Reproduction and Biotechnology
• /
• v.35 no.4
• /
• pp.297-306
• /
• 2020

The aims of the present study were to confirm that regulation of the PA and environment via TGF-β regulation of sperm by Percoll-separated in porcine uterine epithelial cells. And, it was performed to identify the cytokines (TGF-β1, 2 and 3, TGF-β receptor1 and 2; interleukin, IL-6, IL-8) and PA-related genes (urokinase-PA, uPA; tissue-PA, tPA; PA inhibitor, PAI; uPA-receptor, uPAR) by spermatozoa. The experiment used porcine uterus epithelial cells (pUECs) and uterine tissue epithelial cells, Boar sperm were separated by discontinuous Percoll density gradient (45/90%), and tissues were co-incubated with spermatozoa, followed by real-time PCR. PA activity was measured of sperm by discontinuous Percoll density gradient (45/90%) for 24 hours. To measure viability and acrosome damage of sperm double stained propidium iodide (PI) and SYBR-14 or FITC-PNA were used. In results, binding ratio of Percoll-separated sperm was found no differences, but sperms isolated from 90% Percoll layer reduced PA activity (p < 0.05). when co-cultured sperm selected Percoll in porcine uterus tissues epithelial cells, 90% layer sperm increased TGF-β R1, contrastively tPA and PAI-1 in comparison with control (p < 0.05). 45% sperm was decreased the expression of uPA (p < 0.05). TGF-β decreased PA activity in the supernatant collected from pUECs (p < 0.05). Especially, The group including uPA, PAI-1 were induce sperm intact, while it was reduced in sperm damage when compared to control (p < 0.05). Also, there was no significant difference group of tPA and tPA+I in the dead sperm and acrosome damage compared to control. The expression of tPA and PAI showed a common response. Percoll-separated spermatozoa in 90% layer reduced tPA and IL-related gene mRNA expression. Thus, Percoll-sparated sperm in 90% layer show that it can suppress inflammation through increased expression of TGF-β and downregulation of PA and IL in epithelial cells compared to 45% layer Percoll.

• Korean Journal of Plant Resources
• /
• v.35 no.2
• /
• pp.192-200
• /
• 2022

Nitrogen is the most essential macronutrient for the growth of fruit trees and is important factor determining the fruit yield. In order to produce high-quality fruits, it is necessary to supply the appropriate nitrogen fertilizer at the right time. For this, it is a prerequisite to accurately diagnose the nitrogen status of fruit trees. The fastest and most accurate way to determine the nitrogen deficiency of fruit trees is to measure the nitrogen concentration in leaves. However, it is not easy for citrus growers to measure nitrogen concentration through leaf analysis. In this study, several machine learning models were developed to classify the nitrogen deficiency based on the concentration measurement of mineral nutrients in the leaves of tangor Shiranuhi (Citrus unshiu × C. sinensis). The data analyzed from the leaves were increased to about 1,000 training dataset through the bootstrapping method and used to train the models. As a result of testing each model, gradient boosting model showed the best classification performance with an accuracy of 0.971.

• Korean Journal of Optics and Photonics
• /
• v.9 no.3
• /
• pp.175-180
• /
• 1998

Nd:YAG single crystal widely used as solid state laser was grown by Czochralski method. <111> single crystal with 0.9at% of $Nd^{3+}$ was grown from the Czochralski furnace with a automatic diameter control system. The vertical temperature gradient in the liquid was the major factor that influence the crystal quality, and the crystal diameter was controlled by the home made computer program. The crystal boule with $\phi$50mm$\times$ι100mm effective size was cut, polished, and antireflection coated. The optical evaluation such as absorption spectrum, fluorescence spectrum coincide with typical features of Nd:YAG single crystal. The laser rod was assembled into the CW laser generator with a Kr lamp. The maximum CW laser output was 70 W and the threshold power and efficiency was 1.3kW and 1.64% respectively.

• Korean Journal of Crystallography
• /
• v.14 no.2
• /
• pp.84-92
• /
• 2003

The fast pulling is easy to modify the distribution of grown-in defects toward fine size, which can be readily removed by additional treatment. In this experiment, The fast pulled crystals with high pulling late over 1.0 mm/min were grown and their grown-in defect distributions were investigated. In our recent developments in the growth of Cz-Si, it could be found that the cooling rate in a specific temperature range and the uniformity of temperature gradient at solid/liquid interface are more important for the formation of grown-in defect than the pulling rate itself. We analyzed these cooling rates and temperature gradients for the various fast pulled crystals and compared them to the observed formation behavior of the grown-in defects. The effective factor (Ω) for the void defect formation was introduced and it could explain the radial distribution of void defects in the fast-pulled crystals effectively.

• Journal of Wetlands Research
• /
• v.25 no.2
• /
• pp.159-165
• /
• 2023

This study measured the ecological niche overlap between two deciduous oak species(Quercus acutissmia and Q. dentata) according to the change in growth responses after treating with the moisture and nutrient contents of the soil at four gradients, and interpreted the degree of competition between the two oak species by ordination method. In the moisture environment gradient, the ecological niche overlap of the two species was high in the photosynthesis-related leaf organs and low in plant architecture such as shoot length. In addition, in case of competition between two oaks, Q. dentata was remarkably dominant in soil moisture gradient, but Q. acutissimia slightly was slightly advantageous over Q. dentata in the soil nutrient gradient. These results show that even in a similar taxonomical group growing in a similar habitat, the response to the organ system of the plant varies depending on the type of environment factor, resulting in different competitive differences among plants.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.124-124
• /
• 2022

Wheat (Triticum aestivum L.) is the major staple foods and is in increasing demand in the world. The elevated temperature due to changes in climate and environmental conditions is a major factor affecting wheat development and grain quality. The optimal temperature range for winter wheat is between 15~25℃, it is necessary to study the physiological characteristic of wheat according to the elevated temperature. This study presents the effect of elevated temperature on the yield and quality of two Korean bread wheat (Baekkang and Jokyoung) in a temperature gradient tunnel (TGT). Two bread wheat cultivars were grown in TGT at four different temperature conditions, i.e. TO control (near ambient temperature), T1 control+1℃, T2 control+2℃, T3 control+3℃. The period from sowing to heading stage has accelerated, while the growth properties including culm length, spike length and number of spike, have not changed by elevated temperature. On the contrary, the number of grains per spike and grain yield was reduced under T3 condition compared with that of control condition. In addition, the. The grain filling rate and grain maturity also accelerated by elevated temperature (T3). The elevating temperature has led to increasing protein and gluten contents, whereas causing reduction of total starch contents. These results are consistent with reduced expression of starch synthesis genes and increased gliadin synthesis or gluten metabolism genes during late grain filling period. Taken together, our results suggest that the elevated temperature (T3) leads to reduction in grain yield regulating number of grains/spike, whereas increasing the gluten content by regulating the expression of starch and gliadin-related genes or gluten metabolism process genes expression. Our results should be provide a useful physiological information for the heat stress response of wheat.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.2 no.1
• /
• pp.10-19
• /
• 1992

Mn - Zn Ferrite has physical properties of the high initial permeability, saturation magnetic flux density, and low loss factor as a representative magnetic material of soft ferrites, in addition the mechanical property is excellent as a single crystal. Therefore it is important electronic components and used for VTR Head. Mn - Zn Ferrite single crystals with the diameter 8mm were grown in atmosphere mixed with $O_2$ and Ar gas by the Floating Zone(FZ) method that impurities can not be incorporated to the crystals because of not-using the crucible to put in the melt, and the sharp temperature gradient results from making a focus at one point utilizing the infrared ray emitted from the halogen lamp as a heat source. During the crystal growing, the highest temperature of melting area was maintained to be $1650^{\circ}C$, growth rate and rotation rate were 10 mm/hr, 20 rpm respectively. The phases and the growth directions of crystals were determined from the analysis of X RD patterns, Laue, TEM diffraction patterns and etch pit shapes were observed by the optical microscope through the chemical etching. The corelation of optimum conditions for acquiring the better crystals was found out with the growth rate, the length and diameter of melt at the interface according to the diameter of feed rod, and the patterns of growing interface also studied.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.351-351
• /
• 2017

Arbuscular mycorrhizal fungi (AMF) are particular soil fungi that benefit many crops and require a symbiosis with plant roots to survive. In our previous study, there was a positive correlation between AMF root colonization and soybean grain yield in a four-year consecutive winter cover crop-soybean rotational system without phosphorus fertilizer. It is suggested that higher AMF root colonization can be a better solution for improving soybean growth and grain yield in P-limited soil. Our purpose in this study was to test the hypothesis that a P application is the main factor improving soybean growth, P nutrition and grain yield, and the benefit from AMF to soybean P uptake and growth in a P-limited soil. Impact of a P application on AMF root colonization and communities in soybean roots and their potential contribution to soybean growth and P nutrition under a five-year P-unfertilized crop rotational system were investigated over two-years. In this study, four cover crop treatments included 1) wheat (Triticum aestivum); 2) red clover (Trifolium pratense); 3) rapeseed (Brassica napus); and 4) fallow in the crop rotation. The amount of triple superphosphate as a P fertilizer applied rate after cultivation of cover crops was 120 and $360k\;ha^{-1}$ in 2014 and 2015, respectively. Soybean roots were sampled at full-flowering and analyzed for AMF communities using polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE) and quantitative real-time PCR (qPCR) techniques. The AMF root colonization in the soybean roots at full bloom stage was significantly influenced by cover crop and P application throughout the two-year rotation. The two-year rotation of different cover crops or fallow impacted the molecular diversity of AMF communities colonizing roots of soybean. Redundancy analysis (RDA) indicated that AMF communities colonizing roots of soybean were significantly different among cover crop rotations. The AMF communities colonizing roots of soybean were clearly influenced by a P application in the two-year trial. Moreover, a P application may have positively impacts on the AMF communities under P-deficit soil due to the continuous cover crop-soybean rotational system without a P fertilizer.

• Journal of Korean Society of Steel Construction
• /
• v.12 no.2 s.45
• /
• pp.111-122
• /
• 2000

In this study, A series of fatigue tests have been performed on the fillet welded joints of cover plates in steel plate girders in order to quantitatively assess the fatigue characteristics according to the shapes of cover plates. From the results of fatigue tests, it has been shown that the fatigue strengths were slightly different according to their shapes, but satisfied the fatigue design curves in Korea and other countries. Also, from the results of beachmark tests, it has been confirmed that the points of fatigue crack initiation were closely related to the shapes of weld bead toes, and fatigue cracks simultaneously initiated from several points in weld bead toes have been grown as semi-elliptical surface cracks, and these cracks have been coalesced each other, and grown as through thickness cracks, and finally reached to fracture. Besides, from the results of fracture mechanics approaches, stress gradient factors were the most dominant factors among crack correction factors obtained from the existing equations and finite element analysis, and the fatigue life on fillet welded joints of cover plates could be estimated using the relations between fatigue crack growth rate and stress intensity factor range obtained from finite element analysis.

• Journal of Embryo Transfer
• /
• v.15 no.1
• /
• pp.67-75
• /
• 2000

This study was conducted to establish the optimal conditions for in vitro embryo production using oocytes derived from follicles of slaughter-house ovaries. The ovaries of Hanwoo were obtained from a local slaughter-house. The oocytes were aspirated from visible follicles of 2~7mm in diameter. The recovered oocytes which were completely surrounded by at least 2 layers of cumulus cells and a homogeneous cytoplasmic pigmentation were used. The selected oocytes were washed 3 or 4 times with D-PBS containing 10% bovine calf serum (BCS) and matured in vitor (IVM) in Ham's F-10 supplemented with 10% BCS or 0.01 $\mu\textrm{g}$/ml epidermal growth factor(EGF) at 39$^{\circ}C$ under 5% CO2 in air for 24 hours. They were fertilizqed in vitro (IVF) with fresh sperm separated by Percoll density gradient or swim-up in TALP media. The zygotes were cultrued with or without bovine oviductal epitherial cells(BOEC) in media(HECM-6 supplemented with 11 amino acid and / or TCM-199 supplemented with 10% BCS) for 7 to 10 days. The results obtained were as follow: The cleavage rate and developmental rate to blastocyst after maturation and IVF were not significantly different between Ham's F-10 with EGF(76.0% vs. 44.0%) and BCS(75.9% vs. 43.6%)(P<0.05). The cleavage rate and development rate to blastocyst after fertilizing by swim-up or Percoll method were not signifciantly(P<0.05) different between swim-up (80.2% vs. 29.2%) and Percoll(81.9% vs. 26.5%) (P<0.05). The cleavage rate in TCM 199(80.5) was signficiantly higher than that in HECM-6 (72.0%) (P<0.05). However, developmental rate to blastocyst using TCM 199 following HECM-6 for 3 or 4 days (42.2%) was significantly higher than that in TCM-199 alone(26.7%)(P<0.05). The cleavage rate and development rate of embryos produced in vitro by exchange timing for HECM-6 media were not significantly different between in day 3(78.6% vs. 45.5%) and day 4(75.0% vs. 43.2%)(P<0.05). The cleavage rate and developmental rate to blastocysts according to co-culture system were not significantly different between with (74.2% vs. 41.4%) and without BOEC(73.95 vs. 43.5%) (P<0.05). The number of blastomere in blastocyst stage after co-culture with or without BOEC was not significantly different (106.7$\pm$5.1 and 96.6$\pm$4.0). In conclusion, the most transferable IVP embryos could be produced from Ham's F-10 medium for IVM, Percoll density gradient method for IVF sperm separation and in vitro culture in HECM-6 until day 3 or day 4, and then transferred into TCM-199 until day 9 within adequate embryo density in culture droplets after insemination.