• 대한원격탐사학회지
• /
• 제37권4호
• /
• pp.733-745
• /
• 2021

Although waxy corn varieties developed after the 1980s show differences depending on development stages and conditions, studies on the characteristics of waxy corn during the growth stage are rare. The subject of this study was a field survey and unmanned aerial vehicle (UAV) image acquisition of four waxy corn varieties cultivated in Idam-ri, Gammul-myeon, Goesan-gun, Korea. The study was conducted in four stages at intervals of two weeks after planting in 2019. The growth characteristics of each of the four varieties were analyzed using growth curves obtained based on field survey and UAV imagery data. The characteristics of each growth stage of the four varieties of corn, as assessed using normalized difference vegetation index (NDVI) and plant height (P.H.) values, were as follows. The growth model was identified as a model in which three-parameter logistic (3PL) curves reflect the growth characteristics of corn well. In particular, it was found that the variations in growth rate shown by P.H. and NDVI values clearly explain the differences between corn varieties. Among the four cultivars, growth and development first occurred at the early vegetative stage in Daehakchal, followed by Mibaek 2, Miheukchal, and finally Hwanggeummatchal. The variationsin P.H. and NDVI were achieved quickly and earlier in Daehakchal, followed by Mibaek 2, Hwanggeummatchal, and Miheukchal. It was confirmed that these results reflected the characteristics of the fast white-type varieties, while the black-type varieties were delayed, as in a previous study. These results reflect the resistance to lodging that affects the cultivation environment and the response characteristics to nutrients and moisture. It was confirmed that UAV accurately provides growth information that is very useful for analyzing the growth characteristics of each corn variety.

• 산업기술연구
• /
• 제21권A호
• /
• pp.329-336
• /
• 2001

In this study, a series of fatigue tests are carried out in order to estimate quantitatively the characteristics of fatigue crack growth rate for high strength steels of SM570, POSTEN60, and POSTEN80 steel, that is, the influence on fatigue crack growth rate according to the welding line, the characteristics of fatigue crack growth according to the welding method and the kinds of steel, and the characteristics of fatigue crack growth for base metal, heat affected zone and weld metal. From the test results, in case that the notch if parallel to welding line, it knows that the retardations of fatigue crack growth rate in crack tip at early stage increase remarkably than in case that the notch is perpendicular to welding line due to compressive residual stress. And the characteristics of fatigue crack growth rate according to welding method are that the dispersion of fatigue crack growth rate in case of FCAW method is smaller than that of SAW method. Also, it knows that the fatigue crack growth rate converges in high stress intensity factor range.

• 한국약용작물학회지
• /
• 제18권1호
• /
• pp.51-55
• /
• 2010

This study was conducted to investigate the effect of planting position on the growth characteristics, yield and ginsenoside content in Panax ginseng C.A. Meyer at different growth stages. Referring to shoot growth characteristics, stem length, stem diameter and leave area were higher at front than rear, increasing as the proceeding of growth stages. But a lower chlorophyll contents was caused at front compared to rear and decreased as the proceeding of growth stages contrarily. According to root characteristics, root length and main body length were higher at front, with a positive correlation to growth stages, which was also shown on fresh root weight and dry root weight with the maximum in August. Meanwhile, the effect of planting position on ginsenoside content could also be definite by the highest content at front showing high light intensity, increasing as the proceeding of growth stages as well.

• Journal of the Korean Wood Science and Technology
• /
• 제47권5호
• /
• pp.633-643
• /
• 2019

Growth characteristics [stem diameter (D), tree height (H)] and wood properties [Pilodyn penetration (P) and stress-wave velocity (SWV)] were measured for 65 families of 6-year-old Acacia mangium trees planted in Indonesia, in order to characterize their variation in D, H, P, and SWV. Therefore, the correlations between the measured characteristics were also determined, and their significant differences observed. Furthermore, their low to moderate values of narrow-sense heritability was obtained, and the results indicated the characteristics to be genetically controlled in A. mangium. In addition, highly significant positive correlations were observed among the growth characteristics, suggesting a close relationship, while there was no significant association between the growth characteristics and P, as well as SWV, indicating their independent. Therefore, these results demonstrate a potential for the improvement of both growth and wood properties of A. mangium trees, using the appropriate breeding programs. In addition, 18 families showed good performance in D and SWV, signifying their positive prospect of being considered as plus trees for the next generation breeding cycles.

• 품질경영학회지
• /
• 제25권1호
• /
• pp.44-55
• /
• 1997

In order to determine procedures for a, pp.opriate model selection of technological growth curves, numerous time series that were representative of growth behavior were collected according to data characteristics. Three different growth curve models were fitted onto data sets in an attempt to determine which growth curve models achieved the best forecasts for types of growth data. The analysis of the results gives rise to an a, pp.oach for selecting a, pp.opriate growth curve models for a given set of data, prior to fitting the models, based on the characteristics of the goodness of fit test.

• 한국결정성장학회지
• /
• 제14권1호
• /
• pp.1-5
• /
• 2004

Carbon nanofilaments were formed on silicon substrate via microwave plasma-enhanced chemical vapor deposition method. The structure of carbon nanofilaments was identified as the carbon nanofibers. The extent of carbon nanofibers growth and the diameters of carbon nanofibers increased with increasing the total pressure. The growth direction of carbon nanofibers was horizontal to the substrate. Laterally grown carbon nanofibers showed the semiconductor electrical characteristics.

• 한국기계가공학회지
• /
• 제13권5호
• /
• pp.98-106
• /
• 2014

This study was carried out to evaluate the plant growth rate according to the wavelength characteristics of LED light sources. In order to achieve this, red, green, blue and white LEDs were arrayed in a rectangle array consisting of LED modules which can be combined with each other.. This can facilitate the selection of the optimal characteristics of the light from monochromatic red, green, blue and white LEDs or mixed LEDs for plant growth. Experiments to evaluate the growth rate according to the wavelength characteristics of the LEDs with several plants, in this case ice plants, lettuce, barley, broccoli and chives, were performed.

• 한국산림과학회지
• /
• 제94권1호통권158호
• /
• pp.26-33
• /
• 2005

본 연구는 강원도 평창 지역의 천연 활엽수림을 대상으로 입지유형별 임분의 생장 특성과 생태적 특성을 구명함으로써 각 임분 특성에 맞는 산림관리 방안을 제시하고자 하였다. 이를 위해 연구 대상지를 방위, 해발고도, 지형 조건에 따라 36개의 입지유형으로 구분하고 각 입지유형별로 직경 생장량과 직경 생장률 그리고 Shannon-Wither의 다양성지수, 균재도, 풍부도를 파악하여 임분의 생장 특성과 생태적 특성을 비교 분석하였으며, 이를 근거로 산림관리 방안을 제시하였다. 임분의 생장 특성은 방위에 따라서는 동쪽 사면과 서쪽 사면이, 해발고도에 따라서는 서쪽 사면을 제외하고는 해발고도가 낮아짐에 따라, 그리고 지형 조건에 따라서는 사면과 계곡이 양호한 생장 상태를 유지하고 있었다. 생태적 특성은 적정한 습도 조건을 유지할 수 있는 지역으로 방위별로는 북쪽 사면과 서쪽 사면, 지형 조건별로는 계곡의 종 다양성이 높게 나타난 반면 해발고도에 따른 일정한 경향은 찾아볼 수 없었다. 입지유형별 산림관리 방안은 남쪽 사면과 동쪽 사면의 경우 임목 생장과 생태적 특성을 함께 고려한 무육작업이 필요한 반면 서쪽 사면과 북쪽 사면은 생장 촉진을 위주로 한 밀도조절이 필요한 것으로 파악되었다. 해발고도에 따라서는 저지대는 생태적 특성을 고려한 무육관리가 필요하며, 고지대와 중지대는 직경 생장률이 2% 미만인 지역에 대해서는 생장 촉진을 위한 무육작업이 시급한 것으로 나타났다. 한편 지형 조건에 따라서는 남쪽 사면의 중지대와 고지대를 제외하고는 계곡의 생태적 안정성이 기장 양호한 것으로 나타나 친환경적 경영에 가장 적합한 지역으로 평가되었다.

• 도시과학
• /
• 제9권1호
• /
• pp.41-49
• /
• 2020

This study analyzed the factors affecting economic growth using multiple regression model and Geographically Weighted Regression in consideration of population, industry and employment, housing and political characteristics on economic growth by region. The analysis results are summarized as follows. First, the total employment growth rate, manufacturing employment growth rate, local election turnout and the level of party consensus between the central and local governments are having a positive impact on regional economic growth. Second, according to the GWR analysis, the population has a positive impact on economic growth in the southern region of Korea, and the increase in the total number of employees has a positive impact on the southern region of Gyeonggi Province, Gangwon Province, North Chungcheong Province and North Gyeongsang Province. Finally, the voter turnout of urbanites is positively affecting economic growth in South Chungcheong Province, Gangwon Province and the southern coast, while North Jeolla and South Jeolla provinces have a positive impact on economic growth as the parties of the central and local governments are equal. The results of this study may suggest the role of local government for regional economic development.

• KSBB Journal
• /
• 제9권4호
• /
• pp.412-417
• /
• 1994

The biodegradable characteristics of starch-filled polyethylene film by fungi were investigated. Aspergillus niger showed the highest cell growth among five species of fungi used in the experiment. Higher starch content gave the higher growth rate of A. niger; however, the kind of film or cutting direction did not give any effects on the cell growth. The use of vinyl trimethoxysilane for the stronger binding of starch and polyethylene did not inhibit the cell growth. When the starch content was higher than 10%, the elongation of the film decreased significantly after the growth of microorganism in the case of transverse direction samples.