• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.3
• /
• pp.266-273
• /
• 2013

With the worldwide trend of controlling the utilization of fossil fuels inducing global climate change, many efforts will have to be made on securing a sustainable energy supply. Tidal current is a concentrated form of gravitational energy, its resource is significant, but limited locations. To effectively capture tidal current energy from the sea, a group of tidal turbines should be formed and positioned with optimal size and spacing for absorbing from multiple points. Thus, the flow field including turbines becomes a huge domain, a so-called tidal farm. It can be very convenient technically and economically if a whole turbine farm is simulated by means of actuator disc thoery. So, the analysis method using actuator discs coupled with a solution of Reynolds Averaged Navier-Stokes (RANS) equations is adopted for actual tidal turbines. Actuator discs have regions where similar forces imposed by actual turbines are applied to a flow. As working in group formation, turbines naturally have interaction effects on one another. Therefore, the present paper investigate the evaluation on the operating performance of tidal farm in terms of the mutual influence among turbine units with various lateral and longitudinal spacing. Authors expect that results of the present study contribute to the development of tidal farm for the future potential energy.

• The Mathematical Education
• /
• v.38 no.2
• /
• pp.129-144
• /
• 1999

The purpose of our work is to developing the program of math. camp to improve underachiever's mathematical disposition. To do this, the following research were taken; (1)Analysis of current status of programs for underachievers (2)Analysis of inclination to mathematics(We collected the data from 2 classes of middle schools) (3)Prepare and apply the program of math. camp for the students including underachievers, and then analysis the effect of the math. camp The results of this study is as follows; (1)Only 40% of investigated schools have their own programs for underachievers. But almost all general high schools do not have such programs because students do not want. More than half of the investigated teachers suggested that the most important thing for underachievers is the induction of motivation for mathematics. (2)Many students dislike mathematics from 5∼6 grade of elementary school, and more than 50% of students think that 'measure' and 'equations' items are difficult. (3) After attending the math. camp based on the games and activities in small groups, the students in the middle-ranking group showed more positive reactions against the items of mathematical disposition and attitude tests. The students in the row-ranking group were improved in the 'self-confidence' and 'will' items of mathematical disposition test and in the 'superiority' and 'interest' items of mathematical attitude test.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05a
• /
• pp.362-367
• /
• 1997

To assess the coolability of particle bed, which is formed in reactor cavity, it is important to assess the prediction capabilities of Dryout Heat flux correlations. The existing DHF correlations (Sowa et al., Dhir-Catton (a), Dhir-Catton (b), Hardee-Nilson, Ostesen, Shires-Stevens, Lipinski, Jones et al., Dhir-Barleon, Theofanous-Saito, Henry-Fauske) for particle beds are assessed using developed DHF database. Eleven DHF correlations are chosen for assessment based on literature survey. Among them, five are based on flooding correlation, which are used for chemical engineering and others are based on conservation equations. The parameters in DHF correlations are directly substituted into correlations. Totally 202 data are classified into 6 groups based on bed thickness and particle diameter. In each group, prediction capabilities of correlations are assessed and shown by standard deviation and root mean square (RMS) error. Prediction capability of each correlation depends on the data group and none of correlations shows best prediction capability on entire groups. According to present study, even if those correlations show poor prediction capability, Lipinski correlation is best correlation considering entire groups.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.2
• /
• pp.159-165
• /
• 2015

Motion control schemes are generally classified into three categories (point stabilization, trajectory tracking, and path following). This paper deals with the problem which is associated with the initial deployment of a group of Unmanned Surface Vehicle (USVs) and corresponding point stabilization. To keep the formation of a group of USVs, it is necessary to set the relationship between each vehicle. A forcing functions such as potential fields are designed to keep the formation and a graph Laplacian is used to represent the connectivity between vehicle. In case of fixed topology of the graph representing the communication between the vehicles, the graph Laplacian is assumed constant. However the graph topologies are allowed to change as the vehicles move, and the system dynamics become discontinuous in nature because the graph Laplacian changes as time passes. To check the stability in the stage of deployment, the system is modeled with Kronecker algebra notation. Filippov's calculus of differential equations with discontinuous right hand sides is then used to formally characterize the behavior of USVs. The stability of the system is analyzed with Lyapunov's stability theory and LaSalle's invariance principle, and the validity is shown by checking the variation of state norm.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.584-590
• /
• 1993

The constructed closed recycling system discussed in this technical report will be economically viable in future for the production of fish and vegetable in earth, space station and space colony, further, it will contribute a lot in the prevention of pollution in the world's ecological system. To make combined system, water management (Nitrification) is required, and it took 45 days to breed microorganism which facilitates this process. After this period , the recycle was confirmed to be working .Using derived equations, the expected nutrient characteristics of waste water were determined and it was found that the resulting nutrient balance was almost same as that in hydroponic solution when KOH was added to maintain pH level. Reverse osmosis (RO) system could solve the problem of the low nutrient concentration . It was found that plants grow well in fish waste water which was produced using RO system. RO system could combine fish and plant production through the advantageous use of separated high concentration water for plant and permeated water for fish in integrated combined system.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10b
• /
• pp.43-46
• /
• 2003

Prediction of final microstructures after high temperature forming of Ti-6Al-4V alloy was attempted in this study. Using two typical microstructures, i.e., equiaxed and $Widmanst\ddot{a}tten$ microstructures, compression test was carried out up to the strain level of 0.6 at various temperatures $(700\~1100^{\circ}C)$ and strain rates $(10^{-4}\~10^2/s)$. From the flow stress-strain data, parameters such as strain rate sensitivity (m) and activation energy (Q) were calculated and used to establish constitutive equations for both microstructures. Then, finite element analysis was performed to predict the final microstructure of the deformed body, which was well accorded with the experimental results.

• Korean Journal of Pharmacognosy
• /
• v.45 no.2
• /
• pp.113-120
• /
• 2014

Generally, Gwakhyangjeonggi-san has been used for treatment of diarrhea-predominant irritable bowel syndrome. In this study, an ultra-performance liquid chromatography-electrospray ionization-mass spectrometer method was established for the simultaneous quantification of marker compounds 1-20 in Gwakhyangjeonggi-san water extract. All analytes were separated by gradient elution using two mobile phases on a UPLC BEH $C_{18}$ ($100{\times}2.1mm$, $1.7{\mu}m$) column and maintained at $45^{\circ}C$. The injection volume was $2.0{\mu}L$ and the flow rate was 0.3 mL/min with detection at mass spectrometer. Regression equations of the compounds 1-20 were acquired with $r^2$ values ${\geq}0.9950$. The values of limit of detection and quantification of all analytes were 0.01-2.79 ng/mL and 0.03-8.37 ng/mL, respectively. The amounts of the compounds 1-20 in Gwakhyangjeonggi-san water extract were not detected $-3,236.67{\mu}g/g$. The established LC-MS/MS methods will be valuable to improve quality control of traditional herbal formula, Gwakhyangjeonggi-san.

• Smart Structures and Systems
• /
• v.13 no.4
• /
• pp.711-730
• /
• 2014

In this paper the system dynamic influences in actuators with variable stiffness as contemporary used in robotics for safety and efficiency reasons are investigated. Therefore, different configurations of serial and parallel elasticities are modeled by dynamic equations and linearized transfer functions. The latter ones are used to identify the characteristic behavior of the different systems and to study the effect of the different elasticities. As such actuation concepts are often used to reach energy-efficient operation, a power consumption analysis of the configurations is performed. From the comparison of this with the system dynamics, strategies to select and control stiffness are derived. Those are based on matching the natural frequencies or antiresonance modes of the actuation system to the frequency of the trajectory. Results show that exclusive serial and parallel elasticity can minimize power consumption when tuning the system to the natural frequencies. Antiresonance modes are an additional possibility for stiffness control in the series elastic setup. Configurations combining both types of elasticities do not provide further advantages regarding power reduction but an input parallel elasticity might enable for more versatile stiffness selection. Yet, design and control effort increase in such solutions. Topologies incorporating output parallel elasticity showed not to be beneficial in the chosen example but might do so in specific applications.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.9
• /
• pp.489-497
• /
• 2020

The introduction of self-service technologies (SSTs) in retail stores aims to provide customers with a more satisfying shopping experience. Many retailers are increasingly turning toward the adoption of self-service technologies in providing services directly to customers. Given that previous SST research has focused mainly on the impact of the introduction of SST on customer responses, the present study explored the impact of the presence of employees in the relationship between SST and customer responses. Based on the two ground theories, motivation-based theories of behavior and social impact theory, this study tested the relationships between shopping motivations, SST use intention, and retailer attitude. Moderating effects of the presence of employees on the three relationships were also tested. Data were collected using an online survey and analyzed through structural equations modeling. Test results showed that both hedonic and utilitarian shopping motivations effect on SST use intentions, and SST use intentions effect on retailer attitude, subsequently. Although the presence of employee did not moderate the relationship between shopping motivations and SST use intentions, the employee presence moderated the relationship between SST use intentions and retailer attitude. The impact of SST use intentions on retailer attitude was higher in the high presence of employee group than in the low group.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.9
• /
• pp.315-328
• /
• 2020

In this study, we examined various aspects of discretionary accruals. We compared the power of Jones Model (JM), Modified Jones Model (MJM) and Performance Matched Model (PMM). Furthermore, we tested whether accruals derived from cash flow approach or balance sheet approach provide better results and we investigated the significance of country and industry control variables in models. In order to perform these tests, we constructed thirty equations. The data consists of 319 non-financial companies over five years in the GCC region. We used panel data regression models, and testing suggests us to use random effect model as the most suitable one. The results show that PMM has the highest explanatory power among models and it is followed by JM and MJM, consecutively. Secondly, results reveal that accruals derived from cash flow approach provide more accurate results. Moreover, country dummies are significant in models with cash flow approach and they lose significance in balance sheet approach. We differentiated industries due to two different classifications: the first group with higher number of industries is more precise compared to the second group with a narrower scope and lower number of industries. The model including both industrial and country-wise dummies scores highest in significance.