• International Journal of Internet, Broadcasting and Communication
• /
• v.15 no.3
• /
• pp.135-148
• /
• 2023

The Code of Ethics for Newspaper Advertising in Korea, first implemented in 1976 and subsequently revised in 1976, 1996, and 2021, is a critical regulatory instrument for the country's advertising sector. However, the specialized domain of "advertising ethics," particularly the "code of advertising ethics," remains under-explored. This research addresses this scholarly gap, providing an empirical analysis of the 2021 amendment's revision trajectory. This study employs a robust methodological approach, integrating expert interviews and small-group AHP-based surveys. This approach allows for a comprehensive understanding of the revision needs, referencing existing ethical codes studies, and comparing similar ethics codes nationally and internationally. The research further investigates key challenges such as personal data protection and copyright issues in the rapidly evolving digital media landscape, while preserving the existing code's inherent value. The findings are expected to significantly contribute to the emerging field of advertising ethics in Korea, offering practical implications for future code revisions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.6
• /
• pp.471-478
• /
• 2013

Powerful error control and increase in the number of bits per symbol should be provided for future high-quality communication systems. Each message bit may have different importance in multimedia data. Hence, UEP(unequal error protection) may be more efficient than EEP(equal error protection) in such cases. And the LDPC(low-density parity-check) code shows near Shannon limit error correcting performance. Therefore, the effect of UEP with LDPC codes is analyzed for high-quality message data in this paper. The relationship among MSE(mean square error), BER(bit error rate) and the number of bits per symbol is analyzed theoretically. Then, total message bits in a symbol are classified into two groups according to importance to prove the relationship by simulation. And the UEP performance is obtained by simulation according to the number of message bits in each group with the constraint of a fixed total code rate and codeword length. As results, the effect of UEP with the LDPC codes is analyzed by MSE according to the number of bits per symbol, the ratio of the message bits, and protection level of the classified groups.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.3
• /
• pp.156-169
• /
• 2016

The objective of this study is to investigate patent trends of Daegu city which tries to introduce environment friendly energy and to develop new technology or new industry sprung from technology convergence on smart decentralized energy technology and other technologies. After applying network analysis to corresponding groups of technology or industry convergence, strategy for future energy convergence industry is provided. Patent data applied in Daegu city area are used to obtain research goal. The technology which contains several IPC codes (IPC Co-occurrence) is considered as a convergence technology. Path finder network analysis is used for visualizing and grouping by using IPC codes. The analysis results categorized 13 groups in energy convergence industry and reclassified them into 3 cluster groups (Smart Energy Product Production Technology Group, Smart Energy Convergence Supply Technology Group, Smart Energy Indirect Application Technology Group) considering the technical characteristics and policy direction. Also, energy industry has evolved rapidly by technological convergence with other industries. Especially, it has been converged with IT industry, and there is a trend that energy industry will be converged with service industry and manufacturing industry such as textile, automobile parts, mechanics, and logistics by employing infrastructure as well as network. Based on the research results on core patent technology, convergence technology and inter-industry analysis, the direction of core technology research and development as well as evolution on decentralized energy industry is identified. By using research design and methodology in this study, the trend of convergence technology is investigated based on objective data (patent data). Above all, we can easily confirm the core technology in the local industry by analyzing the industrial competitiveness in the macro level. Based on this, we can identify convergence industry and technology by performing the technological convergence analysis in the micro level.

• Structural Engineering and Mechanics
• /
• v.44 no.4
• /
• pp.501-519
• /
• 2012

Truss weight is one of the most important factors in the cost of construction that should be reduced. Different methods have been proposed to optimize the weight of trusses. The artificial bee colony algorithm has been proposed recently. This algorithm selects the lightest section from a list of available profiles that satisfy the existing provisions in the design codes and specifications. An important issue in optimization algorithms is how to impose constraints. In this paper, the artificial bee colony algorithm is used for the discrete optimization of trusses. The fly-back mechanism is chosen to impose constraints. Finally, with some basic examples that have been introduced in similar articles, the performance of this algorithm is tested using the fly-back mechanism. The results indicate that the rate of convergence and the accuracy are optimized in comparison with other methods.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1998.10a
• /
• pp.166-170
• /
• 1998

Classification and Coding(C&C) systems as a core of design information management have been accomplished by many studies in terms of design and manufacturing attribute based on Group Technology. Those are very difficult to apply in make-to-order(MTO) manufacturing because the environment of MTO has various characteristics of product, many licensors, engineering change, insufficiency of integrated management system for codes and so on. This paper presents a suitable C&C system to MTO manufacturing which consider management level and drawing.

• Wind and Structures
• /
• v.8 no.4
• /
• pp.283-294
• /
• 2005

This paper describes the work of the Working Group on wind pressure coefficients on low-rise structures, one of the groups set up by the International Association of Wind Engineering in 1999. General aspects of wind loading on low-rise structures are summarized. The definition, derivation and codification of loading coefficients is described. Comparisons of pressure coefficients on low rise structures are made between a selection of wind loading standards. Recommendations for consistency and for the harmonization of these coefficients are given.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1005-1009
• /
• 2009

An invisible code is one of the useful technologies for a computer interaction. In this paper, we propose a method to display invisible codes using LCD panels and to detect a polarized symbol image with a conventional CCD camera.

• Bulletin of the Korean Mathematical Society
• /
• v.56 no.2
• /
• pp.391-397
• /
• 2019

In this paper, we give a simple proof of the improved Johnson bound for A(n, d), the maximum number of codewords in a binary code of length n and minimum distance d, given by Mounits, Etzion and Litsyn.

• Wind and Structures
• /
• v.1 no.4
• /
• pp.303-315
• /
• 1998

Full-scale measurements have been made to determine the increase in wind speed over two exposed embankments, one of $23^{\circ}$ slope and 4.7 m in height, the other of $24^{\circ}$ slope and 7.3 m in height. Measurements were made at heights of 5, 10 and 15 m above the upper edge of each embankment and at the same heights approximately 100 m upwind in the lower-level approach fetch. Despite the modest sizes of the embankments, the maximum recorded increase in mean wind speed was 28% and the minimum was 13%; these increase relate to increases in wind loads on structures erected at the top of the embankments of 64% and 28% respectively. The associated increases in gust speeds are estimated at 33% and 18%, which imply increases in gust loading of 77% and 39% respectively. These experimental results are compared with predictions obtained from a computational fluid dynamics (CFD) analysis, using three high Reynolds number eddy-viscosity models and estimates from the UK wind loading code, BS 6399: Part 2. The CFD results are generally in agreement with the experimental data, although near-ground effects on the embankment crest are poorly reproduced.

• Nuclear Engineering and Technology
• /
• v.41 no.6
• /
• pp.753-764
• /
• 2009

JAEA started the LSTF experiments in 1985 for the fourth stage of the ROSA Program (ROSA-IV) for the LWR thermal-hydraulic safety research to identify and investigate the thermal-hydraulic phenomena and to confirm the effectiveness of ECCS during small-break LOCAs and operational transients. The LSTF experiments are underway for the ROSA-V Program and the OECD/NEA ROSA Project that intends to resolve issues in thermal-hydraulic analyses relevant to LWR safety. Six types of the LSTF experiments have been done for both the system integral and separate-effect experiments among international members from 14 countries. Results of four experiments for the ROSA Project are briefly presented with analysis by a best-estimate (BE) code and a computational fluid dynamics (CFD) code to illustrate the capability of the LSTF and codes to simulate the thermal-hydraulic phenomena that may appear during SBLOCAs and transients. The thermal-hydraulic phenomena dealt with are coolant mixing and temperature stratification, water hammer up to high system pressure, natural circulation under high core power condition, and non-condensable gas effect during asymmetric SG depressurization as an AM action.