• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.426-430
• /
• 2003

Subsurface biobarrier technology has potential applications to contain contaminated groundwater and/or to degrade toxic pollutants in groundwater. Effective biobarrier formation is need to assess of hydrogeologic characteristics and to conduct practical operation strategies and design based on this prior to design biobarrier. Thus, in this study, we examined hydrogeologic characteristics in biobarrier construction site. Hydraulic conductivities which calculated from slug test data have shown difference with each well as 1.20$\times$10$^{-3}$ -6.00$\times$10$^{-5}$ cm/sec. Tracer test is a method in which concentration of tracer solution during withdrawal in each well by vacuum extraction system is measured with time. Tracer solution was continuously injected by constant head tank. Measured tracer concentration versus time data were fitted to analytical solution of convection dispersion equation (CDE). The fitting data of CDE to the measured data at each extraction well yielded were 0.61cm/min(pore velocity), 5.38$\textrm{cm}^2$/min(dispersion coefficient) for discharge rate of 0.47 1/min and 1.75cm/min(pore velocity), 36.34$\textrm{cm}^2$/min(dispersion coefficient) for discharge rate of 0.93 1/min. As a result, we acquired fundamental parameters which need to design biobarrier and operation strategies.

• Journal of Korea Water Resources Association
• /
• v.39 no.8 s.169
• /
• pp.703-716
• /
• 2006

The flow duration curves in the present and the ideal hydrologic cycle were derived using SWAT model. The present situation is the landuse and the groundwater withdrawal in the year of 2000 and the ideal situation is the landuse of 1975 and no groundwater withdrawal. These results were compared with the previous instream flow requirements which are the larger flow between the average drought flow and environmental control flow. As a result, the present and ideal drought flows of Ojeoncheon, Hakuicheon, Samseongcheon, and Sammakcheon, were the same and the drought flows of Samseongcheon and Sammakcheon were even zero since the baseflow is very little due to the small and mountainous watersheds. The previous instream flow requirement for the riverine function is also larger than the low flow of the ideal hydrologic cycle. The present method to set the instream flow requirement is not proper for the small mountainous watershed since it can be usually overestimated and drive the artificial measures to secure the streamflow Therefore, another method should be developed such as the low flow and the average flow between the drought flow and the low flow of the ideal hydrologic cycle using the proper hydrologic simulation model such as SWAT which can consider the landuse.

• Journal of Korea Water Resources Association
• /
• v.57 no.9
• /
• pp.633-643
• /
• 2024

Many coastal countries have developed and used a wide range of technologies and policy measures to protect freshwater aquifers and groundwater resources from seawater intrusion, and have established and implemented a foundation to legally and institutionally support them. This study covers coastal states in the eastern United States, the Netheland, India and Japan. The goal of this study is to analyze each country's legal and policy measures for coastal groundwater management. By introducing Jeju Island's groundwater standard level system, we aim to provide a basis for future discussions on groundwater management measures not only in Jeju Island but also in coastal areas of Korea. As a result of the analysis, despite the various contents and aspects of coastal groundwater management based on local issues and characteristics around the world, in order to achieve the common goal of securing a stable amount of groundwater withdrawal and preventing seawater intrusion and to maximize the efficiency of groundwater management, it is understood that attempts are being made to establish optimal management measures, laws, systems, and policies based on several key factors. First, considering the hydrogeological characteristics and status of coastal groundwater, a separate special management system is being established and implemented within the scope of the national groundwater management system. In addition, preventing and maintaining groundwater level decline through limiting the amount of groundwater withdrawal and preventing seawater intrusion are key policy goals and policy tools, and it is suppored by research and development. Finally, tt was found that synergy effects are being sought by using various other policy tools and measures in a complex manner.

• Advances in environmental research
• /
• v.3 no.1
• /
• pp.45-69
• /
• 2014

The groundwater has been a major source of water supply throughout the ages. Around 50% of the rural as well as urban population in the developing countries like India depends on groundwater for drinking. The groundwater is also an important source in the agriculture and industrial sector. In many parts of the world, groundwater resources are under increasing threat from growing demands, wasteful use and contamination. A good planning and management practices are needed to face this challenge. A key to the management of groundwater is the ability to model the movement of fluids and contaminants in the subsurface environment. It is obvious that the contaminant source activities cannot be completely eliminated and perhaps our water bodies will continue to serve as receptors of vast quantities of waste. In such a scenario, the goal of water quality protection efforts must necessarily be the control and management of these sources to ensure that released pollutants will be sufficiently attenuated within the region of interest and the quality of water at points of withdrawal is not impaired. In order to understand the behaviour of contaminant transport through different types of media, several researchers are carrying out experimental investigations through laboratory and field studies. Many of them are working on the analytical and numerical studies to simulate the movement of contaminants in soil and groundwater of the contaminant transport. With the advent of high power computers especially, a numerical modelling has gained popularity and is indeed of particular relevance in this regard. This paper provides the state of the art of contaminant transport and reviews the allied research works carried out through experimental investigation or using the analytical solution and numerical method. The review involves the investigation in respect of both, saturated and unsaturated, porous media.

• Economic and Environmental Geology
• /
• v.37 no.6 s.169
• /
• pp.631-645
• /
• 2004

This study assesses groundwater vulnerability to contaminants in industrial and residential/commercial areas of the city of Changwon, using DRASTIC technique and groundwater data. The DRASTIC technique was originally applied to situations in which the contamination sources are at the ground surface, and the contaminants flow into the groundwater with infiltration of rainfall. Mostly the industrial area has higher DRASTIC indices than the residential/commercial area. However, a part of the residential/commercial area having much groundwater production and great drawdown is more contaminated in groundwater than other industrial and the residential/commercial areas even if it has lowest DRASTIC indices in the study area. It indicates that groundwater contamination in urban areas can be closely related to excessive pumping resulting in a lowering of the water level. The correlation coefficient between minimum DRASTIC indices and the degree of poor water quality for 10 districts is as low as 0.40. On the other hand, the correlation coefficients between minimum DRASTIC indices and the groundwater discharge rate, and between minimum DRASTIC indices and well distribution density per unit area are 0.70 and 0.87, respectively. Thus, to evaluate the potential of groundwater contamination in urban areas, it is necessary to consider other human-made factors such as groundwater withdrawal rate and well distribution density per unit area as well as the existing seven DRASTIC factors.

• Journal of Environmental Impact Assessment
• /
• v.12 no.3
• /
• pp.199-209
• /
• 2003

The withdrawal method for protecting the uncontaminated part from the spread of contaminants was suggested by a simultaneous equation. The formulation of them is based upon the build up of the ridge part between the contaminated and uncontaminated parts that resulted from the efficient use of barrier wells. The quality in the withdrawn groundwater depends upon the heads at wells no. 5 and 6. The determination of pumping rates and qualities with changing the heads at wells no. 5 and 6 should be given by considering the demand for water use and the capacity and cost for removing the contained contaminants. The results of this study should be used in taking a plan for supplying water use as well as preventing the spread of contaminants from some known contaminated sources.

• Journal of the Korean earth science society
• /
• v.32 no.6
• /
• pp.537-547
• /
• 2011

Electrical resistivity tomography surveys using boreholes were applied to reveal the cause of a catastrophic land subsidence accompanied by the excessive groundwater withdrawal in urban karst area and to map the connectivity of disseminated cavities over the study area. In order to understand the hydrogeological characteristics, resistivity using exsitu core samples, groundwater level for five boreholes, and hydraulic conductivity using slug test were measured. The hydraulic conductivity variation ranging from 0.8 to $9.3{\times}10^{-4}\;cm/s$ for five boreholes and a gentle slope of groundwater level indicated that there is no significant characteristics of hydraulic heterogeneity. Core samples of the lime-silicated rock were classified as three groups including cracked, weathered, and fresh and measured the resistivity values ranged from 103 to 161, 218 to 277, and 597 to 662 ohm-m, respectively. Drilling results that showed the cavity filled with clay materials and tomogram for this region indicated resistivity value lower than 50 ohm-m. From the inverted resistivity results for each section with five boreholes, cavity and fractured layer were distributed along the depth between 10 and 20 m overall area and cavities ranging from 4 to 6 m filled with clay materials.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.4
• /
• pp.835-844
• /
• 2015

Streamflow responses to irrigation reservoirs and groundwater withdrawals were simulated using the integrated surface-water and groundwater model, SWAT-MODFLOW for the upstream watershed of the Gongdo station located in the Anseong stream. The simulated results indicated that the irrigation water supply from the Gosam and the Geumkwang reservoirs has caused the decrease of 31.2%, 82.5% in drought flows below the reservoirs, respectively, against the natural flow condition. While, at the outlet of the study watershed, the effects of the irrigation reservoirs were insignificant due to the delayed return flows with the decrease of 5.7% in drought flow. Both of the irrigation reservoirs and groundwater withdrawals have reduced the drought flows by 19.2% at the Gongdo station.

• The Journal of Engineering Geology
• /
• v.23 no.4
• /
• pp.375-380
• /
• 2013

The concept of safe yield places an emphasis on balancing groundwater withdrawal with groundwater recharge but ignores naturally occurring groundwater discharge. Because streams and their alluvial aquifers are closely linked in terms of water supply and water quality, to be properly understood and managed they must be considered together. Therefore, some districts in Kansas have reevaluated their safe-yield policies to account for natural groundwater discharge and stream-aquifer interactions by amending their safe-yield regulations to include a portion of baseflow as the minimum desirable streamflow (MDS). This study proposes a modified safe-yield policy in which the drought flow is chosen as the MDS. Baseflow separation was conducted from streamflow hydrograph and the results are presented as a flow-duration curve. The exploitable groundwater can be determined by subtracting MDS from the cumulative baseflow. This method was tested in the Musimcheon watershed, which was validated for streamflow using the SWAT-K model. The annually averaged exploitable groundwater in the whole watershed was estimated to be 86 mm. The exploitable groundwater amounts were also estimated for each subwatershed in the Musimcheon watershed.

• Journal of Soil and Groundwater Environment
• /
• v.11 no.6
• /
• pp.53-60
• /
• 2006

Single well injection withdrawal tracer tests with bromide were carried out at two wells developed in a horizontally heterogeneous fractured rock. The hydraulic conductivity of TW-1 well was 5 times larger than TW-2 well, and the average linear velocity of TW-2 well was 1.8 times faster than TW-1 well. The difference of hydrodynamic dispersions of two wells in the fractured rock was studied with the analysis of concentration breakthrough curves and cumulative mass recovery curves of bromide with withdrawal time, and the estimation of average travel distance, pore velocity, longitudinal dispersivity and longitudinal dispersion coefficient. The average travel distances of bromide were estimated to be 3.00 m in TW-1 well and 5.62 m in TW-2 well. The average pore velocities for the injection/withdrawal phase were estimated to be $4.31\;{\times}\;10^{-4}\;m/sec$ in TW-1 well and $8.08\;{\times}\;10^{-4}\;m/sec$ in TW-2 well. Average travel distance and pore velocity were higher in TW-2 well because of small effective porosity. Longitudinal dispersivities were estimated to be 28.73 cm in TW-1 well and 18.49 cm in TW-2 well, and bromide transport was 1.55 times faster in TW-1 well. Longitudinal dispersion coefficients were estimated to be $5.14\;{\times}\;10^{-6}\;m^2/sec$ in TW-1 well and $6.06\;{\times}\;10^{-6}\;m^2/sec$ in TW-2 well, and diffusion area was 1.18 times larger in TW-2 well.