• 화약ㆍ발파
• /
• 제41권4호
• /
• pp.17-28
• /
• 2023

최근 연구시설 및 자원개발 등의 목적으로 지하공간 활용이 증가하고 있으며, 저심도 암반을 넘어 고심도 암반에 대한 개발이 증가하고 있다. 고심도 지하공간 개발은 높은 응력과 높은 온도 조건에서의 암반의 안정성을 고려해야 한다. 고심도의 경우 암반 구조와 불연속면의 상태 등이 안정성에 영향을 미칠 뿐만 아니라 지진 및 굴착을 위한 암반발파에 의한 지반진동 전파가 지하공동의 응력변화를 발생시켜 암반의 안정성에 영향을 미치게 된다. 발파공학 측면에서 지반진동을 예측하는 방법은 실측 데이터를 바탕으로 통계학적 회귀분석을 통한 경험적 회귀모형과 수치해석적 방법이 사용되고 있다. 본 연구에서는 단일공 발파에 의한 폭발압력 전파특성과 지반진동 전파특성에 대한 경험적 회귀모형을 획득하기 위하여 실험적 방법을 통해 연구를 수행하였다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2000년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 2000
• /
• pp.184-191
• /
• 2000

In this research, a numerical model is developed for analysis of buried pipelines considering longitudinal permanent ground deformation(PGD) due to liquefaction induced lateral spreading. Buried pipelines and surrounding soil are medeled as continuous pipelines using the beam elements and a series of elasto-plastic springs uniformly distributed along the pipelines, respectively. Idealized various PGD patte군 based on the observation of PGD are used as a loading configuration and the length of the lateral spread zone is considered as a loading parameter. Numerical results are verified with other research results and efficient applicability of developed procedure is shown. Analyses are performed by varying different parameters such as PGD pattern, pipe diameter and pipe thickness. Results show that response of buried pipelines are more affected by pipe thickness than pipe diameter. Finally, the critical length of the lateral spread zone and the critical magnitude of PGD which cause yielding, local buckling or tension failure are proposed for the steel pipe which are normally used in Korea.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.388-392
• /
• 1996

Orbit Determination is process of obtaining values of those parameter which completely specify the motion of an orbiting body through space, based on a set of observation of the body. For the narrow land of Korea, the ground tracking system has very limited time of operation. In this connection the use of GPS for orbit determination has advantage of full autonomy on the ground station. It would be more powerful economical method for near-earth satellites. Therfore we have better to pay attention to the research of satellites of orbit determination by use of GPS. So in this research, we studied themotion of the satellites with estimation using GPS. As a result, the result of computer simulation show that good convergence and indicated effective for real operation.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.138-141
• /
• 2007

The permanent scatterer SAR interferometry (PSInSAR) technique has been developed more recently and has been applied to monitor slow but consistent ground subsidence. Since PSInSAR has the advantages in terms of baseline and temporal decorrelation, PSInSAR technique using X-band may also provide useful information about a ground deformation in detail. We developed our codes for a persistent scatterer analysis, and then apply to ERS-1/2 C-band data over Las Vegas in order to validate our new developed algorithm. Based on this test, PS technique using X-band observation such as TerraSAR-X or KOMSAT 5 will be developed.

• Earthquakes and Structures
• /
• 제13권1호
• /
• pp.17-27
• /
• 2017

In this study, the characteristics of site amplification at seismic observation stations in Japan were estimated using the attenuation relationship of each station's response spectrum. Ground motion records observed after 32 earthquakes were employed to construct the attenuation relationship. The station correction factor at each KiK-net station was compared to the transfer functions between the base rock and the surface. For each station, the plot of the station correction factor versus the period was similar in shape to the graphs of the transfer function (amplitude ratio versus period). Therefore, the station correction factors are effective for evaluating site amplifications considering the period of ground shaking. In addition, the station correction factors were evaluated with respect to the average shear wave velocities using a geographic information system (GIS) dataset. Lastly, the site amplifications for specific periods were estimated throughout Japan.

• 한국산업융합학회 논문집
• /
• 제20권2호
• /
• pp.125-132
• /
• 2017

The slope of the road in the forest area has a characteristic of steep slope, so natural disasters such as slope collapse occur. The slope displacement observation technique according to landslide is being studied as a method to observe a wide area and a method to observe a small area. This is a study on high-precision digital map generation using ground LiDAR. It is possible to create a high - precision digital map by minimizing the US side using the 3D LiDAR in the steep slope area where the GPS and Total Station measurement are difficult in the maintenance of the danger slope area. It is difficult to objectively evaluate whether the contour lines generated by LiDAR are correct and it is considered necessary to construct a test bed for this purpose. Based on this study, if terrain changes such as landslides occur in the future, it will be useful for measuring slope displacement.

• 천문학회보
• /
• 제41권2호
• /
• pp.36.2-36.2
• /
• 2016

In mm-VLBI, the quality of observation data is largely affected by atmospheric effect. The most challenging matter is that the phase of correlator output fluctuates rapidly resulting from a variation of atmospheric propagation delay. Consequently, it is demanding to achieve high Signal-to-Noise ratio by integrating data in time domain before calibrating atmospheric delay. However, Korean VLBI Network (KVN) has a unique system to make a 4-frequency (22/43/86/129 GHz) simultaneous observation in mm-wavelength and Frequency Phase Transfer (FPT) calibration technique has effectively removed atmospheric delay in the simultaneous multi-frequency observation of the KVN. For astrometric and astrophysical studies, we evaluated the FPT performance of KVN in various observing conditions. Using the total 38 bright AGNs, we have compared atmospheric conditions such as ground-based weather information, system temperature, atmospheric delay with the calibration results of FPT at 22/43/86/129 GHz during the five experiments in 2013, and quantified its performance in terms of coherence function and Allan variance. We present the analysis result of the relation between the FPT performance and observing conditions.

• Journal of Astronomy and Space Sciences
• /
• 제40권3호
• /
• pp.113-122
• /
• 2023

Although the Relative Global Navigation Satellite System (GNSS) positioning technique provides high accuracy, it has several drawbacks. The scarcity of control points, the long baselines, and using of ultra-rabid and rabid products increased position errors. This study has designed a New MATLAB Program that helps users automatically select suitable IGS stations related to the baseline lengths and the azimuth between GNSS points and IGS stations. This study presented criteria for the length of the baselines used in Egypt and an advanced estimated accuracy before starting the project. The experimental test studies the performance of the position accuracy related to the relation between three factors: observation session, final, rabid, and ultrarabid products, and the baseline lengths. Ground control point mediates Egypt was selected as a test point. Nine surrounding IGS stations were selected as reference stations, and the coordinates of the tested point were calculated based on them. Baselines between the tested point and the IGS stations were classified regarding proposal criteria. The coordinates of the tested point were obtained in different observation sessions (0.5, 1, 2, 4, 5, 6, 7, 7.5 h). The results indicated that the lengths of the baseline in Egypt were classified short (less than 600 km), medium (600-1,200 km), and long (greater than 1,200 km) and required a minimum observation time of 4, 5, and 7 h to obtain accuracy 10, 19, 48 mm sequentially. The position accuracy was superior for the rapid and the final than the ultra-rapid products by 16%. A short baseline was at the best case; there was a performance in position accuracy with a 57% deduction in observation time compared with the long baseline.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권2호
• /
• pp.15-22
• /
• 2020

본 논문에서는 지진발생 후 임의 위치에서 발생된 지진가속도 시간이력을 추정하기 위하여 기상청 지진관측소 계측자료를 활용하는 방법을 제안하였으며, 국내에서 발생한 지진기록을 이용하여 제안한 응답스펙트럼 및 시간이력 추정 방법의 적용성을 평가하였다. 임의 관측소에서 계측된 결과를 인근 관측소 자료를 이용하여 추정하는 방법으로 제안방법을 검증한 결과, 지반정보 없이도 해당 관측소 위치의 지진가속도 응답스펙트럼 및 시간이력을 낮은 수준의 오차로 추정할 수 있었으며, 특히 시간이력의 경우 형상 및 위상의 변화에 큰 차이가 없음을 확인할 수 있는 등 제안된 방법이 임의 위치에서의 지진가속도 시간이력을 추정하는데 유효함을 확인할 수 있었다.

• Journal of Astronomy and Space Sciences
• /
• 제37권4호
• /
• pp.249-255
• /
• 2020

We develop the tissue-equivalent proportional counter (TEPC) type's space radiation dosimeter to measure in-situ aviation radiation. That was originally developed as a payload of small satellite in the low-earth orbit. This dosimeter is based on a TEPC. It is made of an A-150 tissue-equivalent plastic shell of an internal diameter of 6 cm and a thickness of 0.3 cm. TEPC is filled with pure propane at 13.9 torrs to simulate a cell diameter of 2 ㎛. And the associated portable and low power electronics are also implemented. The verification experiments have been performed by the calibration experiments at ground level and compared with Liulin observation at aircraft altitude during the flight between Incheon airport (ICN) and John F. Kennedy airport (JFK). We found that the TEPC dosimeter can be used as a monitor for space radiation dosimeter at aviation altitude based on the verification with Liulin observation.