• 한국환경과학회지
• /
• 제12권6호
• /
• pp.615-626
• /
• 2003

The applied model for this study area is WINFLOW using mite element method, It is thought that the simulation result by WINFLOW model under the steady flow state reflects well the ground water distribution within the reliability level which shows the error range of 1.1% to 8.0% from the comparison between the computed values and the observed, and analyzed that the constant head distribution is shown along the east-west direction and gentle and stable head gradient along the north-south direction. Ground water of the study area shows stable movement from the south to the stream area, and the particle trace for each location shows relatively linear shape from the upstream to the pumping location while the radius of influence according to the pumping amount shows a significant difference at the down stream area from the pumping location. The simultaneous pumping from P and P1 shows more complicated appearance, not the increase of the radius of influence than pumping from a single well P or P1, and it is analyzed that the particle path takes nearly linear form. It is known that the flow direction of the ground water and the velocity of the flow affect on the magnitude of the radius of influence of the wells from the fact that the more decreasing pattern of the ground water head is observed at the side of the well and the down stream area than the upstream area when the ground water moves from south to north regarding the radius of influence according to the pumping amount. Satisfactory results in analyses of ground water movement are obtained through the significant reduction of the physical uncertainties in the flow system as well as the relatively convenient model application using WINFLOW model which is proposed in this study.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.813-824
• /
• 2010

Thermal conductivity of soils is one of the most important parameters to design horizontal ground heat exchangers. It is well known that the thermal conductivity of soil is strongly influenced by its density and water content because of soil's particulate structure. This paper reviewed and evaluated some of the commonly used prediction models for thermal conductivity of soils with the experimental data available in the literature. Semi-theoretical models for two-component materials were found inappropriate to estimate the thermal conductivity of dry state sands. It came out that the model developed by Cote and Konrad gave the best overall prediction for unsaturated sands available in the literature. Also, a parametric analysis is conducted to investigate the effect of thermal conductivity and water content, soil type on the horizontal ground heat exchanger design. The analysis shows that a required pipe length for the horizontal ground heat exchanger is reduced with the increase of soil thermal conductivity and water content. The calculation results also show that the dimension of the horizontal ground heat exchanger can be reduced to a certain extent by using backfilling material with a higher thermal conductivity of solid particles.

• Smart Structures and Systems
• /
• 제25권4호
• /
• pp.433-446
• /
• 2020

In this paper the effect of confining pressure and tunnel depth on the ground vertical settlement has been investigated using particle flow code (PFC2D). For this perpuse firstly calibration of PFC2D was performed using both of tensile test and triaxial test. Then a model with dimention of 100 m × 100 m was built. A circular tunnel with diameter of 20 m was drillled in the middle of the model. Also, a rectangular tunnel with wide of 10 m and length of 20 m was drilled in the model. The center of tunnel was situated 15 m, 20 m, 25 m, 30 m, 35 m, 40 m, 45 m, 50 m, 55 m and 60 m below the ground surface. these models are under confining pressure of 0.001 GPa, 0.005 GPa, 0.01 GPa, 0.03 GPa, 0.05 GPa and 0.07 GPa. The results show that the volume of colapce zone is constant by increasing the distance between ground surface and tunnel position. Also, the volume of colapce zone was increased by decreasing of confining pressure. The maximum of settlement occurs at the top of the tunnel roof. The maximum of settlement occurs when center of tunnel was situated 15 m below the ground surface. The settlement decreases by increasing the distance between tunnel center line and measuring circles in the ground surface. The minimum of settlement occurs when center of circular tunnel was situated 60 m below the surface ground. Its to be note that the settlement increase by decreasing the confining pressure.

• Geomechanics and Engineering
• /
• 제8권5호
• /
• pp.727-739
• /
• 2015

Reclamation of closed dumping grounds is a potential solution to solve land scarce problems. Traditional geotechnical investigations of closed dumping grounds face some problems, such as the emission of hazardous liquids and gases, and the lack of ground information due to the discontinuity between two boreholes. Thus, noninvasive and continuous investigation methods are needed to supplement traditional geotechnical investigations. In this paper, two types of geophysical investigation methods, Seismic Analysis of Surface Waves (SASW) and 2D Resistivity, were carried out to study noninvasive and continuous site investigations for dumping grounds. The two geophysical methods are able to profile the distribution of physical properties of the fill and original materials, by which the extent of the dumping ground can be found and some anomalies in the subsurface can be located. Boreholes were used to assist in locating the dumping material-ground interfaces. The results show that dumping material-ground interfaces obtained from the two geophysical methods are roughly consistent. Moreover, attempt is made in the paper to use the geophysical methods to classify the types of dumping materials. The results show that the classification of dumping materials using the geophysical methods follows the results of the manual sorting of the dumping materials from a borehole.

• 한국터널지하공간학회 논문집
• /
• 제9권2호
• /
• pp.183-204
• /
• 2007

지하수위 아래에 터널이 굴착되면,지하수가 터널내로 유입되면서 터널 단면에 침투력이 작용하게 된다. 이 침투력은 내압과 터널 내공단면의 변위 관계로 정의되는 지반반응곡선에 큰 영향을 미치게 된다. 본 연구에서는 터널내로의 지하수 흐름으로 발생하는 침투력을 정량적으로 평가하였다. 침투력은 터널 주위의 동수경사의 분포를 바탕으로 계산되었으며, 이 결과를 바탕으로, 정상류 흐름일 때 침투력을 고려한 지반반응곡선의 이론해를 유도하였다.보강이 없는 경우와 전면 접착형 록볼트와 숏크리트 라이닝으로 보강된 경우의 변화가 고려되었다. 본 연구에서 유도된 이론해는 수치해석을 통해 검증되었으며, 다양한 토피고와 지하수위 조건에 따른 지반반응곡선의 변화가 연구되었다. 이를 바탕으로 이론해의 적용한계가 제시되었다.

• 한국축산식품학회지
• /
• 제32권2호
• /
• pp.162-167
• /
• 2012

Phosvitin was extracted from a chicken egg yolk and the iron-binding, along with antioxidative activity of the extracted phosvitin, was determined after mixing with ground beef at the concentrations of 100 and 500 mg/kg of meat. The electrophoretic pattern of the extracted phosvitin on SDS-PAGE was found to be identical to that of the standard phosvitin. The extracted phosvitin at $1,000{\mu}g$/mL showed an ability to bind approximately 65% of the iron in a 3 mM iron solution. Lipid oxidation was inhibited in the ground beef mixed with 500 mg/kg of the extracted phosvitin, during storage at $4^{\circ}C$ compared to that of the control (p<0.05). Additionally, color stability of ground beef containing the extracted phosvitin was enhanced (p<0.05). The pH, cooking loss, texture, and sensory properties of the ground beef were not affected, by adding up to 500 mg/kg of the extracted phosvitin. This result suggests that the phosvitin extracted from egg yolk could be used as an antioxidant reagent. In particular, phosvitin would be more amenable for use in meat products because it is a natural protein derived from animal products.

• 대한수의학회지
• /
• 제38권4호
• /
• pp.745-750
• /
• 1998

A sensitive and rapid enzyme immunoassay(EIA) to detect Escherichia coli O157 in ground beef was developed by using a sandwich type assay with polyclonal antibodies to E coli O157. E coli O157 in ground beef could be detected within 15hr, including incubation for 12hr in enrichment broth and 3hr in immunoassay. The EIA could detect $1.3{\times}10^5$ cells of E coli O157/g of ground beef without enrichment. The lowest limit of detection was 0.23 E coli O157 per g of meat after enrichment. Confirmation was required in the positive specimens in the EIA by culture method even though the negative specimens were not. These results suggested that the immunoassay could be a very efficient method for the screening E coli O157 in meat.

• Earthquakes and Structures
• /
• 제15권5호
• /
• pp.529-540
• /
• 2018

The influences of initial damage paths and aftershock (AS) spectral shape on the assessment of AS collapse fragility are investigated. To do this, a four-story ductile reinforced concrete (RC) frame structure is employed as the study case. The far-field earthquake records recommended by FEMA P695 are used as AS ground motions. The AS incremental dynamic analyses are performed for the damaged structure. To examine the effect of initial damage paths, a total of six kinds of initial damage paths are adopted to simulate different initial damage states of the structure by pushover analysis and dynamic analysis. For the pushover-based initial damage paths, the structure is "pushed" using either uniform or triangle lateral load pattern to a specified damage state quantified by the maximum inter-story drift ratio. Among the dynamic initial damage paths, one single mainshock ground motion or a suite of mainshock ground motions are used in the incremental dynamic analyses to generate a specified initial damage state to the structure. The results show that the structure collapse capacity is reduced as the increase of initial damage, and the initial damage paths show a significant effect on the calculated collapse capacities of the damaged structure (especially at severe damage states). To account for the effect of AS spectral shape, the AS collapse fragility can be adjusted at different target values of ${\varepsilon}$ by using the linear correlation model between the collapse capacity (in term of spectral intensity) and the AS ${\varepsilon}$ values, and coefficients of this linear model is found to be associated with the initial damage states.

• 대한공간정보학회지
• /
• 제19권1호
• /
• pp.63-70
• /
• 2011

국가에서 추진하고 있는 국가공간정보체계 사업은 기존의 2차원 지리정보에서 3차원 공간정보를 기본 지형공간정보로 확장되고 있다. 지상 지형공간정보의 구축은 대부분 완료하거나 진행 중에 있는 반면에, 지하특성을 나타내는 시추자료 등의 부족으로 지하 지형공간정보 구축에 어려움을 겪고 있다. 지하의 지형공간정보 구축 측면에서는, 국내의 기관별로 지하정보를 구축 및 관리하고 있으나, 기관별로 보유하고 있는 지하정보는 상호 공유되지 않아 비효율적으로 관리되고 있다. 본 연구에서는 지하공간정보 구축 효율성을 높이는 일환으로, 지반의 상태를 구성하는 지반 DB항목과 지질의 상태를 구성하는 지질 DB항목으로 나누어 3차원 국토지하정보 DB설계를 제시하였다. 구축된 DB를 실제 모델지역에 적용하여, 국토지하정보 활용 기술 구현 및 활용성을 검토하고, 국토지하정보 지식 기반 커뮤니티 구축 방안을 제시하였다.

• 한국지반환경공학회 논문집
• /
• 제13권4호
• /
• pp.93-104
• /
• 2012

20세기 이후 지반의 불확실성을 이해하고 합리적인 해석방법을 개발하기 위한 노력이 경주되어 안전율 개념이 사용되어 왔으나 이러한 개념은 실제 적용되고 있는 인자들이 불확실성을 지님에도 그 대표값을 사용하기 때문에 지반구조물의 상대적인 신뢰성을 측정하는데 한계가 있다. 그러나 현재까지도 불확실성을 완전히 제거할 수 있는 방법은 없으며, 그나마 국내에서 수행되고 있는 지반조사 결과는 이러한 통계적 기법을 적용하는 것조차도 불가능할 정도로 충분치 못한 경우가 대부분이다. 또한 침하량이나 압밀속도 등 압밀 특성이 압밀이력에 따라 크게 차이가 남에도 불구하고 압밀상태에 대한 정확한 규명없이 설계하는 것은 많은 문제점을 나타내게 된다. 따라서 본 논문에서는 압밀인자 중 과압밀비를 중심으로 설계의 불확실성을 줄이기 위한 노력의 일환으로 남해안 중 광양과 부산지역에서 수행된 양질의 실내시험 결과를 바탕으로 압밀상태를 평가하고, 설계정수의 불확실성을 줄이기 위한 정규성 검증이나 이상치 제거 등의 통계처리를 통해 지역별로 깊이에 따른 과압밀비 등의 특성을 제안하였다.