• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.2
• /
• pp.228-235
• /
• 2004

The development and proliferation of the mandibular condyle can be altered by changes in the biomechanical environment of the temporomandibular joint. The biomechanical loads were varied by feeding diets of different consistencies. The purpose of the present study was to determine whether changes of masticatory forces by feeding a soft diet can alter the trabecular bone morphology of the growing mouse mandibular condyle, by means of micro-computed tomography. Thirty-six female, 21 days old, C57BL/6 mice were randomly divided into two groups. Mice in the hard-diet control group were fed standard hard rodent pellets for 8 weeks. The soft-diet group mice were given soft ground diets for 8 weeks and their lower incisors were shortened by cutting with a wire cutter twice a week to reduce incision. After 8 weeks all animals were killed after they were weighed. Following sacrifice, the right mandibular condyle was removed. High spatial resolution tomography was done with a Skyscan Micro-CT 1072. Cross-sections were scanned and three-dimensional images were reconstructed from 2D sections. Morphometric and nonmetric parameters such as bone volume(BV), bone surface(BS), total volume(TV), bone volume fraction(BV/TV), surface to volume ratio(BS/BV), trabecular thickness(Tb. Th.), structure model index(SMI) and degree of anisotropy(DA) were directly determined by means of the software package at the micro-CT system. From directly determined indices the trabecular number(Tb. N.) and trabecular separation(Tb. Sp.) were calculated according to parallel plate model of Parfitt et al.. After micro-tomographic imaging, the samples were decalcified, dehydrated, embedded and sectioned for histological observation. The results were as follow: 1. The bone volume fraction, trabecular thickness(Tb. Th.) and trabecular number(Tb. N.) were significantly decreased in the soft-diet group compared with that of the control group (p<0.05). 2. The trabecular separation(Tb. Sp.) was significantly increased in the soft-diet group(p<0.05). 3. There was no significant differences in the surface to volume ratio(BS/BV), structure model index(SMI) and degree of anisotropy(DA) between the soft-diet group and hard-diet control group (p>0.05). 4. Histological sections showed that the thickness of the proliferative layer and total cartilage thickness were significantly reduced in the soft-diet group.

• Asian Journal of Turfgrass Science
• /
• v.22 no.2
• /
• pp.161-170
• /
• 2008

Recently irregular dark-colored patches were found on the Kentucky teeing ground in a golf course in Gyunggi providence. Interestingly, blue-green algae from the leaf tissue sample containing black spot-stained symptoms were largely observed through microscopic study. In general, algae present on the upper soil surface or in the upper layer of root zone form dark brown layers of scum or crust, which invoked harmful effects to turf growth such as poor drainage, inhibition of new root development. In this observation, unlike the algae were sometime found in senescing leaves on contacted soil in July and August, the blue-green algae were detected within black spot-stained Kentucky bluegrass leaf tissues including leaf blade, ligule, auriclea as well as leaf sheath. The blue-green algae were also detected on the leaf and stem tissue adjacent to the symptomatic leaf tissues. Two species of blue-green algae, Phomidium and Oscillatoria, were greatly observed. Oscillatoria species was more commonly notified in all samples. In addition, the two species were found on a putting green showing yellow spot disease at another golf course in Gyunggi providence. The data from chemical control assay revealed that chemicals such as propiconazole, iprodione, and azoxystrobin decreased blue-green algae population and leaf spots, which finally resulted in enhanced leaf quality. All taken together, we strongly suggested that the disease-like phenomenon by blue-green algae might be very closely mediated with infection/translocation process in relation with turfgrass. It indicates that blue-green algae in turf management may play an adverse role as a secondary barrier as well as a pathogenic agent. This report may be helpful for superintendents to recognize and understand the fact that algae control should be provided more cautiously and seriously than we did previously in upcoming golf course management.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.12
• /
• pp.605-619
• /
• 2014

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2013. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of fluid machinery, pipes and relative parts including orifices, dampers and ducts, fuel cells and power plants, cooling and air-conditioning, heat and mass transfer, two phase flow, and the flow around buildings and structures. Research issues dealing with home appliances, flows around buildings, nuclear power plant, and manufacturing processes are newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for general analytical model for desiccant wheels, the effects of water absorption on the thermal conductivity of insulation materials, thermal properties of Octadecane/xGnP shape-stabilized phase change materials and $CO_2$ and $CO_2$-Hydrate mixture, effect of ground source heat pump system, the heat flux meter location for the performance test of a refrigerator vacuum insulation panel, a parallel flow evaporator for a heat pump dryer, the condensation risk assessment of vacuum multi-layer glass and triple glass, optimization of a forced convection type PCM refrigeration module, surface temperature sensor using fluorescent nanoporous thin film. In the area of pool boiling and condensing heat transfer, researches on ammonia inside horizontal smooth small tube, R1234yf on various enhanced surfaces, HFC32/HFC152a on a plain surface, spray cooling up to critical heat flux on a low-fin enhanced surface were actively carried out. In the area of industrial heat exchangers, researches on a fin tube type adsorber, the mass-transfer kinetics of a fin-tube-type adsorption bed, fin-and-tube heat exchangers having sine wave fins and oval tubes, louvered fin heat exchanger were performed. (3) In the field of refrigeration, studies are categorized into three groups namely refrigeration cycle, refrigerant and modeling and control. In the category of refrigeration cycle, studies were focused on the enhancement or optimization of experimental or commercial systems including a R410a VRF(Various Refrigerant Flow) heat pump, a R134a 2-stage screw heat pump and a R134a double-heat source automotive air-conditioner system. In the category of refrigerant, studies were carried out for the application of alternative refrigerants or refrigeration technologies including $CO_2$ water heaters, a R1234yf automotive air-conditioner, a R436b water cooler and a thermoelectric refrigerator. In the category of modeling and control, theoretical and experimental studies were carried out to predict the performance of various thermal and control systems including the long-term energy analysis of a geo-thermal heat pump system coupled to cast-in-place energy piles, the dynamic simulation of a water heater-coupled hybrid heat pump and the numerical simulation of an integral optimum regulating controller for a system heat pump. (4) In building mechanical system research fields, twenty one studies were conducted to achieve effective design of the mechanical systems, and also to maximize the energy efficiency of buildings. The topics of the studies included heating and cooling, HVAC system, ventilation, and renewable energies in the buildings. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment is mostly focused on indoor environment and building energy. The main researches of indoor environment are related to infiltration, ventilation, leak flow and airtightness performance in residential building. The subjects of building energy are worked on energy saving, operation method and optimum operation of building energy systems. The remained studies are related to the special facility such as cleanroom, internet data center and biosafety laboratory. water supply and drain system, defining standard input variables of BIM (Building Information Modeling) for facility management system, estimating capability and providing operation guidelines of subway station as shelter for refuge and evaluation of pollutant emissions from furniture-like products.

• Korean Journal of Environment and Ecology
• /
• v.10 no.1
• /
• pp.1-13
• /
• 1996

This study was conducted to investigate the avifauna and to suggest the management discipline for the protection of bird community in Odaesan National Park. Field survey was carried over 2 main trails by line transect method from mid June to early December in 1996. The 1st section included the area from Woljongas to Sangwonsa 7km distance. The 2nd section survey started from Sangwonsa via Bukdaesa and the summit of Odaesan to Sangwonsa 9.8 km distance. The study results were as follows ; The observed birds belonged to 9 orders 22families 52species, they also had Black Woodpecker(Dryocopus martius)designated as natural monument No. 242, Chinese Sparrow Hawk(Accipiter soloensis) and Kestrel(Falco tinnunculus) as natural munumet No. 323, Scops Owl(Out scops)and Korean Wood Owl(Strix aluco) as No. 324. These birds also were classified into 25 species for residents, 16 species for summer visitors, 8 species for passage migrants, 3 species for winter visitors, respectionely. The 2nd section showed a high species richness and individuals in every season, however, had a difference in species composition with 1st section. Nesting guild of breeding bird community used highly in order of bush, hole, and canopy as a nest resources. It is suggested that high bush-nesting guild had a deep relationship with bush layer located in the ecotone of 1st section and that located in the high elevated zone in 2nd section. Hole-nesting guild such as Black Woodpecker(Dryocopus martius), Gray-headed Woodpecker(Picus canus) and Great Spotted Woodpecker(Dendrocopos major) were surveyed only in 2nd section, so it could be attribute to the small fragmentation and the growing of high diameter at breast height(D.B.H) tree in 2nd section. It is urgent that the management of camping ground and people for the conservation of brook in 1nd section, trail protection for the prevention from trail enlargement in 2nd section for the bird protection. Artificial food in snowy winter will provide the good breeding condition with the residents and migrants. And, the endeavor to lessen the habitat fragmentation will be beneficial to the birds who have a large home range such as Black Woodpecker(Dryocopus martius) and Korean Wood Owl(Strix aluco). For the control of Domestic Dove(Columba livia) populations, it could be recommended that the elimination of their nesting resources by net.

• Geophysics and Geophysical Exploration
• /
• v.5 no.4
• /
• pp.223-235
• /
• 2002

Since weak Bones or geological lineaments are likely to be eroded, there may develop weak Bones beneath rivers, and a careful evaluation of ground condition is important to construct structures passing through a river. DC resistivity method, however, has seldomly applied to the investigation of water-covered area, possibly because of difficulties in data aquisition and interpretation. The data aquisition having high quality may be the most important factor, and is more difficult than that in land survey, due to the water layer overlying the underground structure to be imaged. Through the numerical modeling and the analysis of a case history, we studied the method of resistivity survey at the water-covered area, starting from the characteristics of measured data, via data acquisition method, to the interpretation method. We unfolded our discussion according to the installed locations of electrodes, ie., floating them on the water surface, and installing them at the water bottom, because the methods of data acquisition and interpretation vary depending on the electrode location. Through this study, we could confirm that the DC resistivity method can provide fairly reasonable subsurface images. It was also shown that installing electrodes at the water bottom can give the subsurface image with much higher resolution than floating them on the water surface. Since the data acquired at the water-covered area have much lower sensitivity to the underground structure than those at the land, and can be contaminated by the higher noise, such as streaming potential, it would be very important to select the acquisition method and electrode array being able to provide the higher signal-to-noise ratio (S/N ratio) data as well as the high resolving power. Some of the modified electrode arrays can provide the data having reasonably high S/N ratio and need not to install remote electrode(s), and thus, they may be suitable to the resistivity survey at the water-covered area.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.28 no.4
• /
• pp.85-97
• /
• 2010

This study analyzed the distribution, structure and environmental condition of the vegetation of the Chionanthus retusus Lindly et Paxton community at the Wansanchielbong in the Jeonju city to offer basic data for sustainable conservation and ecological management system. And the results are as follows; 1. The average pH of soil at the community was pH 5.69 and it was slightly higher than the average of forest soil pH of Korea. But if the degree of pH will be down, it will be needed some more fertilization of Calcium. 2. The total average for contents of organism was 4.98%. And the nitrate - nitrogen content(mg/kg) of A, B, C, D quadrat was 20.29%, 28.87%, 7.65%, and 23.3% respectively. And there were good condition except quadrat C which was contaminated by amount of earth and sand. 3. The flora of the Chionanthus retusus Lindly et Paxton community was listed as 60 taxa; 37 families, 50 genera, 47 species, 10 varieties and 3 forms. The average appearance species of each Quadrat were A sector 30, B sector 26, C sector 19 and D 19 taxa respectively. 4. Surveyed woody plants in the community were as follows : Chionanthus retusus, Zelkova serrata, Quercus variabilis, Cornus walteri, Robinia pseudo-acacia and those were mixed status. And Chionanthus retusus, Zelkova serrata, Robinia pseudo-acacia, Albizzia julibrisin, Cudrania tricuspidata, Symplocos chinensis for. pilosa were mixed in mid layer trees. Herbaceous plants were founded such as Chionanthus retusus, Zelkova serrata, Robinia pseudo-acacia, Grewia parviflora, Rosa multiflora, Trachelospermum asiaticum was dominant with 35~64% in the ground cover, and Commelina communis, Calamagrostis arundinacea, Dryopteris bissetiana, Lilium lancifolium were founded also. 5. The importance values of Chionanthus retusus was 40.2% in the quadrat A1, 50.2% at quadrat A, 50.0% B1, 45.2% B2, 22.4% C1, 73.6% C2, 33.2% D1 and the total average of I.V. was 44.9%. 6. The average height of surveyed Chionanthus retusus was 5.7m and the average DBH was 12.4cm. The number of trees higher than 2m were 107 and the number of trees lower than 2m were 63. The total numbers of Chionanthus retusus were 170. 7. The age of surveyed Chionanthus retusus were analyzed 42 thru 87 years old and that of Zelkova serrata were 42, Quercus variabilis were 60, Quercus aliena were 48, Robinia pseudo-acacia were 40. 8. The number of trees with DBH 40 through 50cm were 6, and that of 30~39cm were 3, and that of 20~29cm were 16, so the total number that was over 20cm was 25. And there were 70 trees under 10cm of DBH and 63 seedlings. It will be very important data to conserve the habitat that the structure and environmental condition of the Chionanthus retusus Lindly et Paxton community at the Wansanchielbong was stable, and sustainable monitoring will be needed. Now that community is nurse forest of Jeonju City but more positive preservation plan will be needed and assigning monument of city or province also be necessary.

• Korean Journal of Soil Science and Fertilizer
• /
• v.17 no.2
• /
• pp.108-113
• /
• 1984

To find out the differences in micro-meteorological changes in the rice plant canopy at the different growing stages, Seokwang-byo, a high yielding variety, was cultivated with three planting densities of 50, 80 and 110 hills per $3.3m^2$ in 1982, and Seokwangbyo and Chucheong-byo, a local variety, were planted with a density of 80 hills per $3.3m^2$. Air temperature in plant canopies, water and soil temperatures were continuously monitored throughout the growing period. The relationship between solar radiation interception and leaf area indices at different height in the canopy also was studied. The results were as follows: 1. Air temperature in the densely planted canopy was 1 to $1.5^{\circ}C$ higher than that in the sparsely planted one at the early growing stage, but was inverted after 60 days of transplanting. The vertical distribution of temperature in the canopies showed that air temperature at 10 cm height from the ground was higher than that at 30 cm height. The temperature inversion occurred showing lower temperature at the 10 cm height than at the 30 cm height. 2. The highest temperature of a day in the canopy occurred at 14:00 to 15:00 Korean Standard Time same as that of air temperature, but approached to the solar noon time as the plants grew thick. 3. The air temperature in the canopy became higher than water temperature when the leaf area indices were 4.6 for Chucheongbyo and 5.2 for Seokwangbyo, and the light penetration ratios were 40 percents. 4. Light extinction coefficients of the 50 to 70 cm layer of the canopies were 0.3 to 0.5 but decreased at the lower layers. 5. Albedo of the canopies was 0.4 in the morning and evening while that was about 0.25 at noon. The difference in albedo between Seokwangbyo and Chucheongbyo could be recognized with the difference in leaf structure.

• Journal of Korea Water Resources Association
• /
• v.39 no.4 s.165
• /
• pp.299-311
• /
• 2006

In this paper it is outlined the methodology of estimating the parameters of water balance analysis method for calculating recharge, using ground water level rises in monitoring well when values of specific yield of aquifer are not available. This methodology is applied for two monitoring wells of the case study area in northern area of the Jeiu Island. A water balance of soil layer of plant rooting zone is computed on a daily basis in the following manner. Diect runoff is estimated by using SCS method. Potential evapotranspiration calculated with Penman-Monteith equation is multiplied by crop coefficients($K_c$) and water stress coefficient to compute actual evapotranspiration(AET). Daily runoff and AET is subtracted from the rainfall plus the soil water storage of the previous day. Soil water remaining above soil water retention capacity(SWRC) is assumed to be recharge. Parameters such as the SCS curve number, SWRC and Kc are estimated from a linear relationship between water level rise and recharge for rainfall events. The upper threshold value of specific yield($n_m$) at the monitoring well location is derived from the relationship between rainfall and the resulting water level rise. The specific yield($n_c$) and the coefficient of determination ($R^2$) are calculated from a linear relationship between observed water level rise and calculated recharge for the different simulations. A set of parameter values with maximum value of $R^2$ is selected among parameter values with calculated specific yield($n_c$) less than the upper threshold value of specific yield($n_m$). Results applied for two monitoring wells show that the 81% of variance of the observed water level rises are explained by calculated recharge with the estimated parameters. It is shown that the data of groundwater level is useful in estimating the parameter of water balance analysis method for calculating recharge.

• Korean Journal of Soil Science and Fertilizer
• /
• v.40 no.1
• /
• pp.25-30
• /
• 2007

Objective of this experiment was to investigate the growth effects of Chinese cabbage and soil salinity to alternative irrigation waters for drought periods. The treatments were consisted of the discharge water from industrial wastewater treatment plant (DIWT), the discharge water from municipal wastewater treatment plant (DMWT) and ground water as the control. For the chemical compositions of alternative water, it appeared that concentrations of the $Ni^+$ and SAR values in DIWT were over the reuse criteria of other countries for irrigation, but CODcr concentration in DMWT was higher than the reuse criteria for agricultural irrigation. According to classification of water by $EC_i$ value, DIWT and DMWT are ranged from 0.7 to $2.0dS\;m^{-1}$, slight salinity. Average harvest indexes were 0.64 for DIWT and 0.63 for DMWT as compared to 0.61 of the control regardless of irrigation periods. SAR value in soil was increased with prolonging the irrigation periods at head forming stage, but not much difference except for 30 days of irrigation period at harvesting time for DIWT. However, it was not much difference along with irrigation periods through the growth stages for DMWT as compared with the groundwater. At harvesting time, average $EC_e$ for the soil irrigated with alternative agricultural waters was $0.017dS\;m^{-1}$ for its DIMT and $0.036dS\;m^{-1}$ for its DMWT as compared to $0.013dS\;m^{-1}$ of its groundwater as the control. For $NH_4-N$ concentrations, it observed that there were no differences among the treatments with different irrigation periods at head forming stage in soil after irrigation. Also, $NO_3-N$ concentration in soil was increased up to 20 days after irrigation, and then decreased at 30 days after irrigation with DMWT at head forming stage. The $Ni^+$ concentration in upper layer soil (0-15 cm) irrigated with DIWT was increased with prolonging the irrigation period at head forming stage, but it was dramatically decreased and almost constant in all the treatments at harvesting time. Therefore, it might be concluded that there was potentially safe to irrigate the discharge water from municipal wastewater treatment plant for 20 days after transplanting to drought periods with cultivating the Chinese cabbage.

• Journal of the Korean Geotechnical Society
• /
• v.39 no.5
• /
• pp.51-63
• /
• 2023

Numerical analysis was conducted to determine the effect of soil behavior by thawing and freezing of seasonal frozen soil on pile foundations. The analysis was performed using the finite element method (FEM) to simulate soil-pile interaction based on the atmosphere temperature change. Thermomechanical coupled modeling using FEM was applied with the temperature-dependent nonlinear properties of the frozen soil. The analysis model cases were applied to the MCR and HDP models to simulate the elastoplastic behavior of soil. The numerical analysis results were analyzed and compared with various conditions having different length and width sizes of the pile. The results of the numerical analysis showed t hat t he HDP model was relat ively passive, and t he aspect and magnit ude of t he bearing capacit y and displacement of the pile head were similar depending on the length and width of the pile conditions. The vertical displacement of the pile head by thawing and freezing of the ground showed a large variation in displacement for shorter length conditions. In the MCR model, the vertical displacement appeared in the maximum thaw settlement and frost heaving of 0.0387 and 0.0277 m, respectively. In the HDP model, the vertical displacement appeared in the maximum thaw settlement and frost heaving of 0.0367 and 0.0264 m, respectively. The results of the pile bearing capacity for the two elastoplastic models showed a larger difference in the width condition than the length condition of the pile, with a maximum of about 14.7% for the width L condition, a maximum of about 5.4% for M condition, and a maximum of about 5.3% for S condition. The significance of the effect on the displacement of the pile head and the bearing capacity depended on the pile-soil contact area, and the difference depended on the presence or absence of an active layer in the soil and its thickness.