• 제목/요약/키워드: Ground System Infrastructure

검색결과 146건 처리시간 0.03초

침투 및 저류 기능을 가진 물 순환 시설의 효과 평가 (Performance Evaluation of Water Circulation Facilities with Infiltration and Retention Functions)

  • 홍정선;말라;김이호;이선하;김이형
    • Ecology and Resilient Infrastructure
    • /
    • 제2권4호
    • /
    • pp.305-310
    • /
    • 2015
  • 서울시는 2014년 기존의 서울시 물순환 조례에 저영향개발 (low impact development, LID)을 포함하는 조례개정을 통해 빗물관리의 토대를 마련하였다. 새롭게 개정된 조례에서는 2050년까지 연 강수량의 약 630 mm를 저류 및 침투시킬 것을 계획하고 있으며, 침투, 저류 및 식생을 활용하는 빗물관리시스템을 도입하여 관리하고자 한다. 저영향개발기법은 개발사업에서 생태, 물순환, 환경 등의 목표를 달성하고자 할 때 적용할 수 있는 중요한 기법이다. 본 연구에서는 서울시에 적용한 침투형 빗물받이, 생태저류형 배수로 및 투수성 포장 등의 다양한 물순환 시설 (LID)의 효과를 평가하기 위하여 수행되었다. 모니터링 결과 다른 시설에 비하여 투수성 포장에서 강우유출 저감효과가 가장 높게 나타났으나, 공극막힘현상을 줄이기 위한 방안이 설계에 반영되어야 하는 것으로 나타났다. 비점오염물질 유출저감의 경우 자동차 운행정도에 의한 오염물질 축적이 큰 영향을 끼친 침투형 빗물받이, 물리 및 생물학적 기작의 영향을 받은 생태저류형 배수로에서 높게 분석되었다. 다양한 목적으로의 저영향개발 기법 적용은 물순환 효과뿐만 아니라 환경오염저감, 생태복원, 심미적 효과 등의 다양한 효과를 보이는 것으로 나타났다.

실규모 하천 실험을 통한 하안침식 방지 Eco-hybrid 롤링매트 공법 개발 및 검증 (Development and Verification of Eco-hybrid Rolling Mat for Preventing Bank Erosion Based on Large-scale Experiments)

  • 지운;장은경;안명희;김원
    • Ecology and Resilient Infrastructure
    • /
    • 제6권4호
    • /
    • pp.217-226
    • /
    • 2019
  • 본 연구에서는 하천의 하안 경사와 친수시설 유무에 따라 적절한 하안 보호 공법을 유형화하였으며, 특히 기존의 호안 공법으로 하안침식 방지 대책 적용이 적절하지 않은 유형에 대해 적용 가능한 신개념 Eco-hybrid 롤링매트 공법을 제시하였다. Eco-hybrid 롤링매트 공법은 지반과 사면의 교란없이 하천 환경과 생태 조건의 변화를 최소화하는 시공이 가능하고, 하안침식이 발생할 경우 즉각적인으로 호안이나 제방 사면을 보호할 수 있는 경제적이고 효율적인 공법이다. 개발된 Eco-hybrid 롤링매트 공법은 실규모 하천 실험을 통해 공법의 구조 및 시스템, 기능과 효과를 검증하였다. 현장에서 발생할 수 있는 여러 변형 및 부패 테스트를 포함한 실규모 하천 실험 검증을 수행하였으며, 저유속과 고유속 조건에서 롤링매트의 작동과 하안침식 방지 효과를 확인하였다. 하안침식 방지 효과는 유사 농도 분석을 통해 정량적으로 검증하였으며, 실험에 활용한 롤링매트를 기준으로 규격화하여 Eco-hybrid 롤링매트 공법의 제품의 시방 (안)을 제시하였다.

천리안위성2A호 기상탑재체 Best Detector Select 맵 평가 및 업데이트 (GEO-KOMPSAT-2A AMI Best Detector Select Map Evaluation and Update)

  • 진경욱;이상철;이정현
    • 대한원격탐사학회지
    • /
    • 제37권2호
    • /
    • pp.359-365
    • /
    • 2021
  • 천리안위성2A호 기상탑재체 AMI(Advanced Meteorological Imager) 센서 검출기의 최상의 요소들로 구성된 Best Detector Select (BDS) 맵은 발사 전 확정되어 AMI에 업로드 되어 있다. 위성 발사 이후 급격한 온도 변화 환경에 노출되면 검출기의 성능에 변화가 생길 수 있으며, 발사 및 탑재체 아웃개싱 이후에 BDS맵의 성능을 다시 분석하고 필요시 업데이트가 필요하다. 검출기 요소 전체에 대한 성능을 검증하기 위한 분석 작업이 탑재체 개발업체(미 L3HARRIS사)가 제공한 BDS맵 분석 기술 문서를 기반으로 진행되었다. BDS맵 분석이란 탑재체 검출기가 기준 목표물(심우주와 탑재체 내부 보정 타겟)을 응시하는 동안 얼마나 안정적인 신호를 보이는 지를 평가하는 것이다. 이러한 목적으로 LTS(Long Time Series) 및 V-V(Output Voltage vs. Bias Voltage)라 부르는 검증법이 이용된다. LTS는 30초 동안, V-V는 2초 동안 목표물을 응시하고 이 때의 검출기 노이즈 성분을 계산한다. 자료를 획득하기 위해서는 탑재체의 운영을 멈추고 특별 관측을 실시하여야 하기 때문에, 정상 운영 전인 궤도상 시험기간 중에 해당 작업이 이루어지게 된다. 천리안위성2A호 기상탑재체 궤도상 시험 기간 동안 획득한 자료를 바탕으로 BDS맵의 상태를 평가하였다. 발사 전 지상 시험에서 평가된 BDS맵의 전체 성분들 중에 약 1%에 해당하는 요소들이 성능 변화를 보였으며, 이를 다른 요소들 중 최상의 성능을 보이는 성분으로 교체하였다. 새로운 BDS맵을 적용한 결과 BDS문제로 인해 야기된 기상탑재체 원시영상에 나타나는 노이즈 성분(줄무늬)이 완전하게 제거되었다.

국토관측위성용 정밀영상생성시스템 개발 (Development of the Precision Image Processing System for CAS-500)

  • 박형준;손종환;정형섭;권기억;이계동;김태정
    • 대한원격탐사학회지
    • /
    • 제36권5_2호
    • /
    • pp.881-891
    • /
    • 2020
  • 고해상도 위성영상의 수요 증가로 국토교통부와 과학기술정보통신부에서 국토관측위성을 개발하고 있다. 국토관측위성의 주요 위성영상 산출물로 정밀보정영상, 정밀정사영상, DSM/DTM, 변화탐지 주제도 등이 계획되어 있다. 이러한 위성영상 산출물의 품질은 위성영상의 기하정확도에 기반하여 결정된다. 따라서, 고품질의 위성영상 산출물을 생성하기 위해 위성영상의 기하학적인 왜곡을 보정하는 것이 중요하다. 또한, 정밀기하수립을 위한 GCP를 취득하는 방법은 대체로 정사영상, 수치지도 등을 이용하여 수동으로 취득한다. 이 방식은 GCP를 취득하는데 많은 시간이 요구된다. 따라서, 자동으로 GCP를 추출하여 GCP 취득 시간과 정밀정사영상 생성 시간을 줄이는 것이 필요하다. 이를 위해, 국토관측위성으로 촬영한 위성영상의 정밀한 기하보정과 GCP 추출 시 사용자의 개입을 최소화할 수 있는 정밀영상생성시스템을 개발하였다. 본 논문은 국토관측위성용으로 개발된 정밀영상생성시스템의 산출물, 처리 과정 및 시스템 구성에 대해서 설명하고 개발된 시스템의 처리시간 성능에 대해서 기술한다. 본 시스템을 통해 개발된 기술과 데이터베이스를 활용하여 한반도를 촬영한 모든 국토관측위성영상으로부터 신속하게 정밀정사영상을 생성할 수 있을 것으로 기대된다. 향후, GCP DB와 DEM DB의 데이터를 해외지역으로 확장하여 해외지역의 정밀영상을 생성할 수 있는 후속 연구가 필요하다.

관수조절에 의한 벽면녹화의 냉각효과 분석 연구- 아이비, 수호초를 식재한 모듈형 벽면녹화를 중심으로- (A field Study to Evaluate Cooling Effects of Green Facade under Different Irrigation Conditions - Focusing on modular green facade planted with Hedera helix L and Pachysandra terminalis -)

  • 김은섭;윤석환;박정강;전윤호;강혜원;김상혁;김지연;이용구;이동근
    • 한국환경복원기술학회지
    • /
    • 제24권6호
    • /
    • pp.121-132
    • /
    • 2021
  • Green facade has a significant impact on building's energy performance by controlling the absorption of solar radiation and improving outdoor thermal comfort through shading and evapotranspiration. In particular, since high-density building does not enough green space, green facade, and rooftop greening using artificial ground plants are highly utilized. However, the level of cooling effect according to plant traits and irrigation control is different. Therefore, in this study, the cooling effect analyzed for a total of 4 cases by controlling the irrigation condition based on hedera and spurge. Although hedera under sufficient water had the highest cooling effect(-2℃~-4℃), had the lowest cooling effect under non-irrigation(+1.1℃~+4.4℃). In addition, hedera under sufficient water had cooling effect than hedera under non-irrigation(-1℃~-8.1℃) and in the case of spurge, it had cooling effect(-0.3℃~-7.8℃) more than non-irrigation. As a result of measuring the amount of transpiration according to the light intensity (PAR) and carbon dioxide concentration conditions, transpiration of hedera was higher than the spurge (respectively 0.63204mmolm-2s-1, 0.674367mmolm-2s-1). The difference in the cooling effect of the green facade under irrigation condition was significant. But the potential cooling effect of green facade according to plants species was different. Therefore, in order to maximize and continuously provide the cooling effect of green facade in urban areas, it is necessary to consider the characteristics of plants and the control of water supply through the irrigation system.

대절토사면에 보강된 억지말뚝의 활동억지효과에 관한 연구 (Reinforcement Effect of Stabilizing Piles in Large-scale Cut Slops)

  • 홍원표;한중근;송영석;신도순
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2003년도 사면안정학술발표회
    • /
    • pp.65-81
    • /
    • 2003
  • During the last few decades in Korea, the development of hillside or mountain areas has rapidly increased for infrastructure construction such as railroads, highways and housing. Many landslides have occurred during these constructions. Also, the amount and scale of damage caused by landslides have increased every year. In the case of Far East Asia including Korea, the damage of landslides is consequently reported during the wet season. In this paper, the effect of stabilizing piles on slope stability is checked and the behavior of slope soil and piles are observed throughout the year by field measurements in the large-scale cut slopes. In particular a large-scale cut slope situated on the construction site for the express highway in Donghae, Korea. First of all, The behavior of the slope soil was measured by inclinometers during slope modification. Landslides occurred in this area due to the soil cutting for slope modification. The horizontal deformations of slope soil gradually increased and rapidly decreased at depth of sliding surface indicating that the depth of sliding surface below the ground surface can be predicted. On the basis of being able to predict the depth of the sliding surface, stabilizing piles were designed and constructed in this slope. To ensure the stability of the reinforced slope using stabilizing piles, an instrumentation system was installed. The maximum deflection of piles is measured at the pile head and it is noted that the piles deform like deflection on a cantilever beam. The maximum bending stress of piles is measured at the soil layer. The pile above the soil layer is subjected to lateral earth pressure due to driving force of the slope, while pile below soil layer is subjected to subgrade reaction against pile deflection. As a result of research, the effect and applicability of stabilizing piles in large-scale cut slopes could be confirmed sufficiently.

  • PDF

Scramjet Research at JAXA, Japan

  • Chinzei Nobuo
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2005년도 제24회 춘계학술대회논문집
    • /
    • pp.1-1
    • /
    • 2005
  • Japan Aerospace Exploration Agency(JAXA) has been conducting research and development of the Scramjet engines and their derivative combined cycle engines as hypersonic propulsion system for space access. Its history will be introduced first, and its recent advances, focusing on the engine performance progress, will follow. Finally, future plans for a flight test of scramjet and ground test of combined cycle engine will be introduced. Two types of test facilities for testing those hypersonic engines. namely, the 'Ramjet Engine Test Facility (RJTF)' and the 'High Enthalpy Shock Tunnel (HIEST)' were designed and fabricated during 1988 through 1996. These facilities can test engines under simulated flight Mach numbers up to 8 for the former, whereas beyond 8 for the latter, respectively. Several types of hydrogen-fueled scramjet engines have been designed, fabricated and tested under flight conditions of Mach 4, 6 and 8 in the RJTF since 1996. Initial test results showed that the thrust was insufficient because of occurrence of flow separation caused by combustion in the engines. These difficulty was later eliminated by boundary-layer bleeding and staged fuel injection. Their results were compared with theory to quantify achieved engine performances. The performances with regards to combustion, net thrust are discussed. We have reached the stage where positive net thrust can be attained for all the test coditions. Results of these engine tests will be discussed. We are also intensively attempting the improvement of thrust performance at high speed condition of Mach 8 to 15 in High Enthalpy Shock Tunnel (HIEST). Critical issues for this purposemay be air/fuel mixing enhancement, and temperature control of combustion gas to avoid thermal dissociation. To overcome these issues we developed the Hypermixier engine which applies stream-wise vortices for mixing enhancement, and the M12-engines which optimizes combustor entrance temperature. Moreover, we are going to conduct the flight experiment of the Hypermixer engine by utilizing flight test infrastructure (HyShot) provided by the University of Queensland in fall of 2005 for comparison with the HIEST result. The plan of the flight experiment is also presented.

  • PDF

광해방지 지반침하방지 기술개발 추진 현황 및 주요 성과 (A Study on the Status and Major Achievements on Mine Subsidence Prevention Technology)

  • 양인재;이승아
    • 터널과지하공간
    • /
    • 제27권6호
    • /
    • pp.357-365
    • /
    • 2017
  • 광해방지 기술개발사업은 한국의 광산지역 특성에 최적화된 조사 및 설계, 충전효율화를 위한 설계 및 시공, 자동화 계측 및 모니터링을 위한 현장실증을 토대로 기술상용화 기반의 연구를 추진하여 왔다. 1, 2단계 광해방지 기술개발 로드맵('07~'16)에서는 지반침하 안정성 평가방법, 충전재 및 충전기술 개발, 계측장비 개발의 성과목표를 달성하였다. 향후에는 지반침하 위험지역에 대한 체계적인 관리를 위하여 4차 산업혁명 시대에 걸맞은 지반침하방지 신기술 발굴 및 도입을 통해 기술력을 향상시키고 이와 병행한 사업추진 기술인프라를 강화시켜 나가고자 한다.

고가용성 클라우드 컴퓨팅 구축을 위한 그리드 소프트웨어 아키텍처 (Software Architecture of the Grid for implementing the Cloud Computing of the High Availability)

  • 이병엽;박준호;유재수
    • 한국콘텐츠학회논문지
    • /
    • 제12권2호
    • /
    • pp.19-29
    • /
    • 2012
  • 최근, 클라우드 컴퓨팅 기술은 다양한 서비스의 형태로 제공이 되며, 사용자는 서비스의 물리적인 위치나, 시스템 환경과 같은 부분들을 관여하지 않고, 스토리지 서비스, 데이터의 사용, 소프트웨어의 사용들을 제공하는 획기적인 서비스로 거듭나고 있다. 클라우드 컴퓨팅 기술들은 인프라스트럭처에서 요구되는 서비스의 수준, 다양한 시스템에서 요구되는 하드웨어적인 문제들을 벗어서 자유스럽게 원하는 만큼의 IT 리소스를 쉽게 사용할 수 있는 장점을 가지고 있다. 또한 인터넷 기반의 다양한 기술들을 기반으로 비즈니스 모델에 대한 자원의 사용을 자유스럽게 선택할 수 있는 장점을 가지고 있어 무엇보다도 능동적인 자원 확장을 위한 프로비져닝 기술과 가상화 기술들이 주요한 기술로 주목 받고 있다. 이러한 기술들은 웹 베이스의 사용자들이 자유롭게 접근하고, 사용자 환경에 맞도록 설치가 가능하게 지원하는 중요한 기술 요소들 중의 하나이다. 따라서 본 논문은 클라우드 컴퓨팅 기술 동향에 대한 분석을 통해 고 가용성 클라우드 컴퓨팅 환경을 구축하기 위한 그리드 측면에서의 소프트웨어 관련 기술과 아키텍처를 소개 한다.

개량된 TDR센서를 이용한 대형 모형제방의 침투 해석 (Seepage Analysis of Large-Scale Embankment Model by Revised TDR Sensor)

  • 박민철;이종욱;김유석;한희수
    • 한국지반공학회논문집
    • /
    • 제28권11호
    • /
    • pp.53-67
    • /
    • 2012
  • 본 논문에서는 기존에 사용되던 철선 TDR계측선의 문제점을 해결하기 위해 스테인리스 스틸과 열수축튜브를 이용해 개량된 TDR계측선을 개발하여, 함수비에 대한 민감도를 높이고 노이즈를 줄이며 내구성을 향상시켜 TDR시스템의 현장적용성을 높였다. 개량된 TDR계측선을 이용하여 실내에서 포화도 변화실험과 아크릴모형실험을 수행하였으며, 실험결과 별도의 필터링 및 정량화 과정을 거치지 않은 초기 계측 그래프만으로 쉽게 포화, 불포화 및 건조구간을 파악할 수 있었다. 이후 대형 모형제방에 개량된 TDR센서를 설치하여 침투실험을 수행하였으며 그 결과, 실내시험과 같은 명확한 지하수 분포형태 파악이 가능하였으며, 침투 시간경과에 따른 각 구간의 지하수 분포변화를 파악할 수 있었고 손쉽게 모형제방의 침윤선을 작도할 수 있었다.