• 제목/요약/키워드: Ground Surface Area

검색결과 709건 처리시간 0.029초

충북 청원군에서 관측된 지표면 부근의 오존 (Measutements of the ground-level ozone in a rural area of Chongwon, Korea)

  • 윤마병;정용승
    • 한국대기환경학회지
    • /
    • 제11권1호
    • /
    • pp.85-93
    • /
    • 1995
  • Measurements of ground level ozone concentrations were made in a rural area of Chongwon (Choongbook Province) from June 1993 to July 1994. High values frequently exceeding 100 ppb (ambient air qualyty standard of Korea) were recorded. High ozone concentrations in the boundary layer were primarily correlated with the several meteorological parameters in warm seasons: pressure, radiation, temperature, precipitation and wind velocity. The annual average concentration of ozone at Chongwon was 17ppb, and this value was relatively higher than those for other cities in Korea. O$\_$3/ concentrations were observed to increase when the ridge of a surface anticyclone was passing over the region, and maximum values(.geq.100 ppb) were observed on the rear sides of high pressure centers and in the warm sectors of cyclones(well head of cold fronts). The ozone concentrations had a negative correlation with the concentration of primary pollutants(e.g., total hydrocarbons).

  • PDF

고로쇠나무(Acer Mono)의 수액출수에 미치는 환경요인과 그 군락의 자원화에 관한 연구 (2): 환경요인 및 공시목의 회복 (Studies on the Environmental Factors for Sap Exudation of Acer mono and the Resource Development of its Community (2): Environmental Factors and Tree Recovery)

  • Kim, Chul-Soo;Kwak, Ae-Kyung
    • The Korean Journal of Ecology
    • /
    • 제17권4호
    • /
    • pp.533-545
    • /
    • 1994
  • The bleeding of 39 Acer mono trunks by wounding was investigated at the altitudes of 400m, 500m, 800m, and 1100m on Wangsirobong (1,214m), Mt. Chiri area (127°34'E., 35°14'N.) from February 4 to March 21, 1993 and from February 23 to March 23, 1994. The amount of sap in a day was clodely related to the change of air temperature and wind speed. Especially, the abundant sap was exudated at the ranges of -4~13℃ in the daily range of temperature and it was below 0.14m/s in wind speed. The most abundant bleeding was exudated from Acer mono trunk located south facing slope in 800m altitude. Also the amount of sap increased with incereasing suface area of crown. The maximum bleeding of sap was collected from the hole punctured at 80cm height from the ground surface at southern part of the trunks. And the number of exudation holes had an important effect on bleeding of sap but the number of holes should be controlled by DBH of trunks. These results suggested that the exudation was influenced by the daily range of temperature and wind speed. And the altitude, direction of sloped where the trees occurred, surface area of crown, the number of exudation holes, height form the ground surface and the direction of the hole was 91.6% when germicide (Dimethyl-4,4' -ophenylene bis 3-thio alonate) was treated from April to October after bleeding of sap in the year.

  • PDF

지상기준점 선점 위치에 따른 DSM 높이 정확도 분석 (Quality Assessment of Digital Surface Model Vertical Position Accuracies by Ground Control Point Location)

  • 이종필
    • 지적과 국토정보
    • /
    • 제51권1호
    • /
    • pp.125-136
    • /
    • 2021
  • 최근 초경량무인비행장치(UAV)의 활용과 영상처리 기술 발달로 인해 정사영상과 수치모형 등을 활용한 응용 분야가 다양해지고 있다. 특히 토지측량분야에서도 이러한 결과물을 활용하여 위험지역분석과 같은 공간정보 활용이 활발해지고 있다. 본 연구에서는 UAV 고해상도 영상을 활용하여 고저차가 심한 경사지에서 정사영상의 위치정확도와 수치표면모델의 수직위치 정확도를 분석하고자 하였다. 연구 결과 대상지역 전역에 고르게 분포한 지상기준점(GCP)인 경우 2차원 정사영상에서 평면위치 오차는 크지 않았다. DSM의 수직위치의 경우 GCP의 선점위치를 점 간 고도차를 약 10m, 20m, 30m, 40m로 구분하여 전체를 포괄하는 각 8점의 GCP와 검사점을 대상으로 분석한 결과 비행코스별 고르게 분포되고 GCP 점 간 높이차가 30m일 경우(RMSEZ=0.07m) 가장 높은 정확도를 보였다. 본 연구지역과 유사한 대상지역을 UAV를 활용하여 수치모형을 제작할 경우 GCP 위치선정과 수직위치 정확도 향상에 도움이 될 수 있기를 기대한다.

Service life evaluation of HPC with increasing surface chlorides from field data in different sea conditions

  • Jong-Suk Lee;Keun-Hyeok Yang;Yong-Sik Yoon;Jin-Won Nam;Seug-Jun Kwon
    • Advances in concrete construction
    • /
    • 제16권3호
    • /
    • pp.155-167
    • /
    • 2023
  • The penetrated chloride in concrete has different behavior with mix proportions and local exposure conditions, even in the same environments, so that it is very important to quantify surface chloride contents for durability design. As well known, the surface chloride content which is a key parameter like external loading in structural safety design increases with exposure period. In this study, concrete samples containing OPC (Ordinary Portland Cement), GGBFS (Ground Granulated Blast Furnace Slag), and FA (Fly Ash) had been exposed to submerged, tidal, and splash area for 5 years, then the surface chloride contents changing with exposure period were evaluated. The surface chloride contents were obtained from the chloride profile based on the Fick's 2nd Law, and the regression analysis for them was performed with exponential and square root function. After exposure period of 5 years in submerged and tidal area conditions, the surface chloride content of OPC concrete increased to 6.4 kg/m3 - 7.3 kg/m3, and the surface chloride content of GGBFS concrete was evaluated as 7.3 kg/m3 - 11.5 kg/m3. In the higher replacement ratio of GGBFS, the higher surface chloride contents were evaluated. The surface chloride content in FA concrete showed a range of 6.7 kg/m3 to 9.9 kg/m3, which was the intermediate level of OPC and GGBFS concrete. In the case of splash area, the surface chloride contents in all specimens were from 0.59 kg/m3 to 0.75 kg/m3, which was the lowest of all exposure conditions. Experimental constants available for durability design of chloride ingress were derived through regression analysis over exposure period. In the concrete with GGBFS replacement ratio of 50%, the increase rate of surface chloride contents decreased rapidly as the water to binder ratio increased.

The impact of EPB pressure on surface settlement and face displacement in intersection of triple tunnels at Mashhad metro

  • Eskandari, Fatemeh;Goharrizi, Kamran Goshtasbi;Hooti, Amir
    • Geomechanics and Engineering
    • /
    • 제15권2호
    • /
    • pp.769-774
    • /
    • 2018
  • The growth of cities requires the construction of new tunnels close to the existing ones. Prediction and control of ground movement around the tunnel are important especially in urban area. The ground respond due to EPB (Earth Pressure Balance) pressure are investigated using the finite element method by ABAQUS in intersection of the triplet tunnels (Line 2, 3 and 4) of Mashhad Urban Railway in Iran. Special attention is paid to the effect of EPB pressure on the tunnel face displacement. The results of the analysis show that in EPB tunneling, surface settlement and face displacement is related to EPB pressure. Moreover, it is found that tunnel construction sequence is a great effect in face displacement value. For this study, this value in Line 4 where is excavated after line 3, is smaller than that line. In addition, the trend of the displacement curves are changed with the depth for all lines where is located in above and below, close to and above the centerline tunnel face for Line 2, 3 and 4, respectively. It is concluded that: (i) the surface settlement decreases with increasing EPB pressure on the tunnel face; (ii) at a constant EPB pressure, the tunnel face displacement values increase with depth. In addition, this is depended on the tunneling sequence; (iii) the trend of the displacement curves change with the depth.

공주제일광산 수계에 분포하는 지하수, 지표수, 토양 및 퇴적물의 환경지구화학적 특성과 중금속 오염 (Environmental Geochemistry and Heavy Matel Contamination of Ground and Surface Water, Soil and Sediment at the Kongjujuil Mine Creek, Korea)

  • 이찬희
    • 자원환경지질
    • /
    • 제32권6호
    • /
    • pp.611-631
    • /
    • 1999
  • Enviromental geochemisty and heary metal contamination at the Kongjueil mine creek were underaken on the basis of physicohemical properties and mineralogy for various kinds of water (surface, mine and ground water),soil, precipitate and sediment collected of April and December in 1998. Hydrgeochemical composition of the water samples are characterized by relatively significant enricant of Ca+Na, alkiali ions $NO_3$ and Cl inground and surfore water, wheras the mine waters are relatively eneripheral water of the mining creek have the characteristics of the (Ca+Mg)-$(HCO_3+SO_4)$type. The pH of the mine water is high acidity (3.24)and high EC (613$\mu$S/cm)compared with those of surface and ground water. The range of $\delta$D and $\delta^{18}O$ values (relative to SMOW) in the waters are shpwn in -50.2 to -61.6% and -7.0 to -8.6$\textperthousand$(d value=5.8 to 8.7). Using computer program, saturation index of albite, calcite, dolomite in mine water are nearly saturated. The gibbiste, kaolinite and smectite are superaturated in the surface and ground water, respectively. Calculated water-mineral reaction and stabilities suggest that weathing of silicate minerals may be stable kaolinite owing to the continuous water-rock reaction. Geochemical modeling showed that mostly toxic heavy metals may exist larfely in the from of metal-sulfate $(MSO_4\;^2)$and free metal $(M^{2+})$ in nmine water. These metals in the ground and surface water could be formed of $CO_3$ and OH complex ions. The average enrichment indices of water samples are 2.72 of the groundwater, 2.26 of the surface water and 14.15 of the acid mine water, normalizing by surface water composition at the non-mining creek, repectively. Characteristics of some major, minor and rate earth elements (Al/Na, K/Na, V/Ni, Cr/V, Ni/Co, La/Ce, Th/Yb, $La_N/Yb_N$, Co/Th, La/Sc and Sc/Th) in soil and sediment are revealed a narrow range and homogeneous compositions may be explained by acidic to intermediate igneous rocks. And these suggested that sediment source of host granitic gneiss colud be due to rocks of high grade metamorphism originated by sedimentary rocks. Maximum concentrations of environmentally toxic elements in sediment and soil are Fe=53.80 wt.% As=660, Cd=4, Cr=175, Cu=158, Mn=1010, Pb=2933, Sb=4 and Zn=3740 ppm, and extremely high concentrations are found are found in the subsurface soil near the ore dump and precipitates. Normalizing by composition of host granitic gneiss, the average enerichment indices are 3.72 of the sediments, 3.48 of the soils, 10.40 of the precipitates of acid mine drainage and 6.25 of the soils near the main adit. The level of enerichment was very severe in mining drainage sediments, while it was not so great in the soils. mineral composition of soil and sediment near the mining area were partly variable being composed of quartz, mica, feldspar, chlorite, vermiculite, bethierin and clay minerals. reddish variable being composed of quartz, mica, feldspar, chlorite, vermiculite, bethierin and clay minerals. Reddish brown precipitation mineral in the acid mine drainage identifies by schwertmanite. From the separated mineralgy, soil and sediment are composed of some pyrite, arsenopyite, chalcopyrite, sphalerite, galena, malachite, goethite and various kinds of hydroxied minerals.

  • PDF

부유 및 부착성장 질화균에 미치는 구리 독성의 영향 (Effect of Copper toxicant on Suspended and Attached Growth Nitrifying Bacteria)

  • 김금용;백주헌;이상일
    • 대한환경공학회지
    • /
    • 제31권10호
    • /
    • pp.855-864
    • /
    • 2009
  • 본 연구에서는 질산화 반응이 활발히 진행되고 있는 기존 하수처리장 슬러지를 이용하여 3개월 이상 농축 배양한 후에 부착 및 부유성장 상태로 적응시킨 질화균을 이용하여 독성물질에 대한 영향을 조사하였다. 본 실험의 목적은 부유 및 부착성장 질화균을 이용하여 이들의 비표면적에 따른 독성물질의 영향을 상호비교하기 위한 것이다. 이를 위하여 부유 및 부착상태의 농축 질화균의 비표면적을 다르게 하여 각각에 대한 독성물질의 영향을 조사하였다. 연구 결과 부착성장 질화균 및 부유성장 질화균의 경우 비표면적이 클수록 독성에 대한 영향을 더 많이 받는 것으로 나타났다. 부착상태와 탈착상태의 질화균을 사용한 실험에서, 독성물질에 대한 영향은 탈착상태보다 부착상태에서 독성의 영향을 적게 받았으며, Nitrosomonas의 경우에는 1.12배, Nitrobacter의 경우에는 1.09배 독성의 영향을 적게 받았다. 부유성장 질화균을 사용한 경우에는 분쇄 전보다 분쇄 후에 독성의 영향을 더 크게 받았으며, Nitrosomonas의 경우에 1.46배, Nitrobacter의 경우에 1.35배 독성의 영향을 적게 받았다. 또한, 기질에 아질산염을 주입하지 않고 실험한 결과에서도 유사한 결과를 얻었다. 부착상태와 탈착상태의 질화균을 사용한 실험에서, 독성물질에 대한 영향은 탈착상태보다 부착상태에서 독성의 영향을 적게 받았으며, Nitrosomonas의 경우에는 1.83배, Nitrobacter의 경우에는 1.78배 독성의 영향을 적게 받았다. 부유성장 질화균을 사용한 경우에는 분쇄 전보다 분쇄 후에 독성의 영향을 더 크게 받았으며, Nitrosomonas의 경우에 1.27배, Nitrobacter의 경우에 1.32배 독성의 영향을 적게 받았다.

유한차분법을 이용한 말뚝의 하중전이특성 및 해석기법 (Analytical Technique and Load Transfer Features on Pile Using Finite Difference Method)

  • 한중근;이재호
    • 한국환경복원기술학회지
    • /
    • 제9권5호
    • /
    • pp.10-21
    • /
    • 2006
  • For analyze of the bearing capacity, skin friction and settlements of pile on axial compressive loading, both Load transfer tests of pile and pile loading test in field have application to commonly before pile installing. A bearing capacity of pile was affected by the characteristics of surrounding ground of pile. Especially, that is very different because of evaluation of settlement due to each soil conditions of ground depths. The ground characteristics using evaluation of bearing capacity of pile through load transfer analysis depends on N values of SPT, and then a bearing capacity of pile installed soft ground and refilled area may be difficult to rational evaluation. An evaluation of bearing capacity on pile applied axial compressive loading was effected by strength of ground installed pile, unconfined compressive strength at pile tip, pile diameter, rough of excavated surface, confining pressure and deformation modules of rock etc and these are commonly including the unreliability due to slime occurred excavation works. Load transfer characteristics considered ground conditions take charge of load transfer of large diameter pile was investigated through case study applied load transfer tests. To these, matrix analytical technique of load transfer using finite differential equation developed and compared with the results of pile load test.

단층 발달 습곡지반 상 구조물 안정성을 위한 설계정수 도출 사례 연구 (Case Study of Derivation of Input-Parameters for Ground-Structure Stability on Foliation-Parallel Faults in Folded Metamorphic Rocks)

  • 임명혁
    • 문화기술의 융합
    • /
    • 제6권2호
    • /
    • pp.467-472
    • /
    • 2020
  • 일반적인 보통 등급의 지반(ground) 상 구조물의 안정성 확보를 위한 설계입력정수(input-parameters) 도출방법들은 보편적으로 잘 알려져 있다. 연구지역과 같은 습곡된(folded) 변성암(metamorphic rocks) 지반은 엽리가(foliation) 촘촘히 발달해 있고, 엽리에 평행한 소규모 단층들(faults)이 분포하고 있어 설계입력정수 도출을 위한 특별한 조사방법 및 시험, 등이 요구된다. 수 mm 간격의 엽리가 발달한 변성암 지반은 엽리면 직접전단강도시험(direct shear test), 엽리의 배향(strike/dip)과 맵핑(mapping), 엽리의 지하 연속성 파악을 위한 시추조사, 변성암반의 암반분류(rock mass rating), 등이 필요하다. 특정 엽리면을 따라 발달한 소규모의 엽리평행단층(foliation-parallel faults)이 다수 발달한 지반은 선구조선 분석, 단층 추적을 위한 지표지질맵핑, 단층면 직접전단강도시험, 등이 필수적이다. 습곡지반은 지질구조구(structural domain) 분석, 불연속면의 평사투영(stereonet)해석, 습곡축을 따른 전기비저항탐사, 등의 추가조사로 설계입력정수 도출이 합리적이다.

합성개구레이더 영상을 이용한 하천내 DEM 개선 방안 (Measures to improve the DEM using SAR images in the river corridor)

  • 김주훈;노희성
    • 한국수자원학회논문집
    • /
    • 제55권11호
    • /
    • pp.913-922
    • /
    • 2022
  • 본 연구에서는 하천구역에 대해 SAR 영상 분석에 의한 수면적 범위를 이용한 DEM을 개선하는 방법을 제안하고, 북한과 같은 비접근 지역에 적용 가능한 위성 기반의 3차원 하천 공간정보 구축 방법을 제시함을 목적으로 하고 있다. 이를 위해 접근 가능한 남한의 낙동강 지류인 남강 유역을 대상으로 연구를 진행하였다. 위성영상은 유럽항공우주국에서 제공하고 있는 Sentinel-1A/B 자료에 대해 2021년 1년간의 SAR 위성영상 자료를 수집하여 각 시기별의 수체면적을 추출하였다. 지상관측 수위는 WAMIS의 1시간 간격의 자료를 수집하였다. SAR영상 분석에 의해 추출한 수체면의 최저면적부터 최고면적까지 자료에 대해 지상의 계측 수위를 조합하여 수체면 변화에 따른 하천내 고도를 분석하여 DEM을 개선하였다. DEM 개선 후 하천구역내 고도가 매우 다양한 값을 나타내고 있어 기존의 DEM보다 비교적 자연스러운 형태의 하천 DEM을 구성하고 있는 것으로 판단된다. 개선된 DEM에 대한 정확도 검증을 위해 현장에서 측정한 지형 고도자료가 필요하나 자료의 부재로 인해 정확도 검증은 수행하지 못하였다. 다만 본 연구에서는 기존의 DEM과 SAR 영상 분석에 의해 분석된 수체면의 수위를 이용하여 DEM을 개선하는 방법을 제시하였다. 향후 정확도 검증에 대한 추가 연구를 수행한 후 다른 지역에 대한 적용성 검토 및 북한과 같은 미계측/비접근 지역에 적용할 수 있는 방법론을 추가로 제시하는 연구를 진행할 계획이다.