• 제목/요약/키워드: Ground Surface Area

검색결과 713건 처리시간 0.027초

금호지구 저습답의 암거배수효과에 관한 연구(I) (Studies on Wet Paddy Field Underdrainage Improvement in the Gum-Ho Area (I))

  • 김조웅;김시원
    • 한국농공학회지
    • /
    • 제22권4호
    • /
    • pp.82-95
    • /
    • 1980
  • This paper complies the results of the studies so far made on the subsoil improvement of subsurface drainage systems for wet paddy fields (those were located in the Gum-Ho area in Kyung Buk province) which had poor permeability and a high water table. In general, a drainage problem is an excess of water on the ground surface which can effect the productivity and bearing capacity of the soil. With drain pipe systems, (According to their depths and spacing) it may be possible to correct that problem. The experimentation consisted of three test plots, two of which included drain pipe systems with varing depths and width spacing of the pipes. The third plot (C) was an ordinary plot being exempt of a drain pipe system. In detail, the depth of plot A was 80 cm, and the width spacings began at 2. Om and increased by 2. Om up to 10. 0m. The depth of plot B was 60cm and the width spacing was the same as plot A. These tests were performed to research specific details; such as crop yeild, bearing capacity of the soil, the amount of underdrainage, surface cracks, root distribution, the water table level, the consumptive water depth and the soil moisture content. The test period lasted three years, from 1977 thru 1979. The results obtained were as follows: 1. During the test period, the weather conditions for the area tested were in accordance with the annual average for that area. Furthermore the precipitation factor during the spring cultivation season, the intermediate drainage period and the harvest drainage period was of optimum conditions for controling surface cracks, because of less precipitation than evaporation. 2. The difference in the level of the ground water table in plots A and B was hardly noticable, but the difference in the test plots and the ord. plot was greatly noticable. The test plots (A, B) were 30 to 40cm lower than the ordinary plot. On the whole, the ground water table of the ord. plot always stayed at a level of 15-20cm beneath the surface of the soil, the ground water table of the test plot A showed The difference in the depth of the pipe lower than the test plot B, while the test plots showed a remarkable descending effect. 3. The soil temperature in plot A was slightly core than in plot B with a difference of 0. 47$^{\circ}$C, but plot A was 1. 6$^{\circ}$C higher than the ord. plot during the flooding period, but after drainage the temperature difference climed to 2. 0$^{\circ}$C. 4. During the 3rd test year, the values of the cracks were recorded with the values of 59cm in plot A, 42cm in plot B and 15cm in the ordinary plot. Plots A and B had increased 2.5 times the value of the first year while the ordinary plot had remained the same. 5. The root weight of the rice was measured at a value of 77.2 gr. for plot A, 73.5 gr. for plot B and 65.3 gr. for the ord. plot. Therefore, the root growths in plots A and B were much more energetic than in the ord. plot. 6. The consumptive water depth measured during the 3rd year resulted in the values of 26. 0mm per day for plot A, and 24.9 mm per day for plot B, respectively. Therefore, both plot A and plot B maintained the optimum consumptive water depths, but the ordinary plot only obtained the value of 12.3 mm per day, which clearly showed less than the optimum consumptive water depth which is 20 to 30 mm/day. 7. The soil moisture content is in direct relationship to the ground water level. During drainage, test plot A decreased in its ground water level much more rapidly than the other two plots. Therefore, plot A had a much less soil moisture content. But this decreased water level could be directly effected by the weather conditions. 8. The relationship between the bearing capacity and the soil moisture content were directly inversely proportional. It can be assumed that the occurence of soil creaks is limited by the soil moisture content. Therefore, the greater the progress of the surface creaks resulted in a greater bearing capacity. So, tast plot A with a greater amount of surface cracks than the other test plots resulted in a greater bearing capacity. But, the bearing capacity at the harvest season could be effected by the drainage during the intermediate drainage period and by the weather conditions. 9. Comparing the production of the test plots to the ord. plot; there was an increased value of 840kg for plot A, 755kg for plot B and 695kg for the ord. plot in the rough rice. Therefore, plot A had an increase of 20% over the ordinary plot. The possibility of producing double crops was investigated. The effects on barley production in the test plots showed a value of 367kg per 10 acres, which substantiated the possibility of double crops because that value showed an increased value over the average yearly yield for those uplands. 10. So as a result, it can be recommended that by including a drain pipe system with the optimum conditions of an (80cm centimeter) depth and a (l0m) spacing will have a definite positive effect on the over all production capacity and quality of wetpaddy fields.

  • PDF

지구통계기법과 표면파 다중채널분석을 이용한 포항 지반의 SPT-N value 교차검증 (Cross-Validation of SPT-N Values in Pohang Ground Using Geostatistics and Surface Wave Multi-Channel Analysis)

  • 김경오;한희수
    • 한국산학기술학회논문지
    • /
    • 제21권10호
    • /
    • pp.393-405
    • /
    • 2020
  • 지반 및 기초의 안정성 평가, 지진의 액상화 평가 등을 위해서 지반강도 및 지하수 높이 등 다양한 지반정보가 필요하다. 대한민국에서 행해지는 표준관입시험(Standard Penetration Test, SPT) 결과는 국토지반정보포털시스템에 등록하게 되어있다. 비시추지역의 지반정보가 필요할 경우, 지구통계기법(Geostatistics)들을 응용할 수 있다. 본 논문은 경험적 베이지안 크리깅(Empirical Bayesian Kriging, EBK)과 역거리 가중치법(Inverse Distance Weighting Method, IDWM)을 이용하여 비시추지역의 지반정보를 구할 경우의 타당성에 관한 것이다. 이 기법들을 이용하기 위해 공간 보간에 범용적으로 적용되는 Esri사의 ArcGIS Pro 프로그램을 사용하였다. 본 해석에 사용된 지구통계기법들의 정확성을 검토하기 위하여, 표준관입시험에서 구한 시추지역 지반의 강도 정수 및 지하수의 높이를 해석기법의 결과와 교차 검증하였다. 또한, 지구물리학적 기법인 표면파 다중채널분석(Multichannel Analysis of Surface Waves, MASW)조사를 추가 수행하여, 본 해석에 사용된 기법들을 재검증하였다. 포항 북구 지역을 1.0km×1.0km로 분할하여 총 111개의 구역으로 분할하였으며, 경험적 베이지안 크리깅(EBK) 및 역거리 가중치법(IDWM)을 통한 표준관입시험치 및 지하수위에 대한 교차검증을 수행한 결과, 두 기법 모두 적합한 것으로 나타났다. 표면파 다중채널분석(MASW)은 대략적인 구간 영역을 제시하여, SPT N값의 분포양상과 지하수위를 명확히 파악하기 곤란하였다.

주거단지의 친환경적 우수처리 실태에 관한 연구 -베를린의 현행 계획 및 사례를 중심으로- (A Study on the Management of Precipitation for the Environmental Friendly Housing Complex -focused on the Contemporary Planning and Example Performed by Berlin-)

  • 이태구
    • 한국주거학회논문집
    • /
    • 제11권2호
    • /
    • pp.117-127
    • /
    • 2000
  • As urbanization proceeds and therefore impervious surface coverage increases, the amount of runoff goes up and the hydrological cycle is also changed. The surface retention and interception of precipitation in the urban area are reduced because the surface area is now slick and solid. Increasing runoff in building areas of the city causes flood damage, water pollution, reduction of ground water recharge, and the other environmental problems. This paper investigates various techniques of increasing rates in a site development performed by Berlin. The techniques offered in this paper improve sit water balance, and thus keep the site ecosystem much healthier.

  • PDF

MOF-5 계열 화합물의 수소 흡착 용량 예측에 관한 분자모델링 연구 (Molecular Modeling Studies on the Functionalized MOF-5)

  • 김대진;이태범;최승훈;이은성;오유진;윤지혜;김자헌
    • 한국전기화학회:학술대회논문집
    • /
    • 한국전기화학회 2004년도 수소연료전지공동심포지움 2004논문집
    • /
    • pp.287-292
    • /
    • 2004
  • In order to understand the relationship between molecular structure of Metal-Organic Framework(MOF) and capacity of hydrogen absorption, quantum mechanical calculations and grand canonical Monte Carlo simulations have been carried out on a series of MOF-5 having various organic linkers. The calculation results about specific surface area and electron density for various frameworks indicated that the capacity of the hydrogen storage is largely dependent on effective surface area rather than the free volume. Based on the iso-electrostatic potential surface from density functional calculation and the amount of adsorbed hydrogens from grand canonical Monte Carlo calculation, it was also found that the electron localization ground organic linker plays an important role in hydrogen capacity of MOFs.

  • PDF

실내모형시험을 통한 상대밀도가 다양한 사질토 지반에서의 하수도관 파손에 따른 지표침하의 영향범위에 관한 연구 (A Study for Influence Range of Ground Surface due to Sewer Fracture in Various Relative Density of Sand by Laboratory Model Test)

  • 오동욱;안호연;이용주
    • 한국지반공학회논문집
    • /
    • 제32권2호
    • /
    • pp.19-30
    • /
    • 2016
  • 도심지 지반함몰 현상의 대부분이 노후된 하수관에 의해 발생한다는 것은 이미 잘 알려진 사실이다. 따라서 관 파손의 위치와 주변 지반의 상대밀도가 지반의 거동에 미치는 영향을 알아보기 위해 실내모형시험을 수행하였다. 관 파손은 관 둘레에 대해 20% 파손된 것으로 가정하여 관 상부에 파손이 발생한 경우와 하부에 발생한 경우로 고려하였다. 느슨한 지반과 조밀한 지반을 상대밀도 30%, 70%로 조성하여 관 파손의 위치에 따른 지반 거동을 측정하였을 뿐만 아니라, 유한요소해석을 이용하여 실내모형시험 결과와 비교 분석하였다. 관 하부가 파손되어 누수가 발생되는 것이 상부가 파손되는 것보다 더 큰 지반 거동을 유발하는 것으로 나타났을 뿐만 아니라, 느슨한 지반에서 더 큰 지표침하량이 발생하는 것을 알 수 있었다.

고양시 고봉산에 발달한 소규모 습지에 관한 연구 (A Study on the small Gobong Wetlands in Goyang City)

  • 문현숙
    • 동굴
    • /
    • 제67호
    • /
    • pp.43-51
    • /
    • 2005
  • 본 연구는 수문지형학적 관점에서 고봉동습지를 연구하였다. 고봉산의 남서쪽에 위치한 습지는 산지의 개석과 심층풍화의 영향을 많이 받은 곳이다. 지질적으로는 호상편마암에 속하는 지역이다. 3개 사면으로 부터 지하수 및 지표수를 공급받으며, 습지수원의 대부분은 지하수이다. 습지 지역은 지하수면과 가까이 발달하고 있다. 토양적 조건은 습지 발달에 유리하다. 장석과 운모의 점토광물화로 인하여 습지수의 저류성을 높여주기 때문이다.

Mechanochemical Treatment of Quartz for Preparation of EMC Materials

  • Shin, Hee-Young;Chae, Young-Bae;Park, Jai-Koo
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
    • /
    • pp.315-324
    • /
    • 2001
  • Mechanochemical effects that occurred in the fine grinding process of quartz particles using planetary ball mill was investigated. Quartz particles have been frequently utilized for optical materials, semiconductor molding materials. We determined that grinding for a long time can be create amorphous structures from the crystalline quartz by Mechanochemical effects. But, to be produced nano-composite particles that the critical grinding time reached for composite materials in a short time. Henceforth, a qualitative estimation must be conducted on the filler for EMC(Epoxy molding compound) materials. It can be produced mechanochemically treated composite materials and also an integrated grinding efficiency considering of the nano-composite amorphous structured particles. The mechanochemical characteristics were evaluated based on particle morphology, size distribution, specific surface area, density and the amount of amorphous phase materials into the particle surface. The grinding operation in the planetary ball mill can be classified into three stages. During the first stage, initial particle size was reduced for the increase of specific surface area. In the second stage, the specific surface areas increased in spite of the increase in particle size. The final stage as a critical grinding stage, the ground quartz was considered mechanochemically treated particles as a nano- composite amorphous structured particles. The development of amorphous phase on the particle surface was evaluated by X-ray diffractometry, thermal gravity analysis and IR spectrometer. The amount of amorphous phase of particles ground for 2048 minutes was 85.3% and 88.2% by X-ray analysis and thermal gravity analysis, respectively.

  • PDF

한국 중서부 지방에서의 서식지 환경요인에 따른 월동 청둥오리(Anas platyrhynchos)의 주간행동 (Habitat Quality Factors and Diurnal Activity Patterns of Wintering Mallards(Anas platyrhynchos) in Central-West, Korea.)

  • 김현태;김광훈;문형태;조삼래
    • The Korean Journal of Ecology
    • /
    • 제20권1호
    • /
    • pp.9-14
    • /
    • 1997
  • Wintering behavior of mallards Anas platyrhynchos was studied from November 1995 to February 1996 at wintering habitats : Seosan reclaimed site, Oksan reservoir, and Kum river in Korea. The population of wintering mallards in maximum count was about 35, 000 at Sosan, 500 at Oksan and 1, 680 at Kum river, respectively. In Seosan area, mallards spent more time on water surface. In Kum river and Oksan reservoir, however, they spent more time in riversides. During the daylight hours, mallards spent more time in riversides and ground as the time passes by in the area. Behavioral patterns varied with habitat type, by days and months. Resting was a major time expenditure of mallards on water surface and riversides, and feeding occured occasionally on the ground. During the daytime, feeding and resting activities increased as time passed toward dusks However, time spendings for locmotion and comfort were decreased when it is close to the sun sets. Major disturbance factors within the habitats were identified the local traffics of humans, boats, aircrafts and motor vehicles. Among them, human was the most frequently affecting disturbance factor to the wintering mallards.

  • PDF

로타리 연삭에 의한 대직경 Si-wafer의 ELID 경면 연삭특성 (Characteristic of Mirror Surface ELID Grinding of Large Scale Diametrical Silicon Wafer with Rotary Type Grinding Machine)

  • 박창수;김원일;왕덕현
    • 한국공작기계학회논문집
    • /
    • 제11권5호
    • /
    • pp.58-64
    • /
    • 2002
  • Mirror surface finish of Si-wafers has been achieved by rotary in-feed machining with cup-type wheels in ELID grinding. But the diameter of the workpiece is limited with the diameter of the grinding wheel in the in-feed machining method. In this study, some finding experiments by the rotary surface grinding machine with straight type wheels were conducted, by which the possible grinding area of the workpiece is independent of the diameter of the wheels. For the purpose of investigating the grinding characteristics of large scale diametrical silicon wafer, grinding conditions such as rotation speed of grinding wheels and revolution of workpieces are varied, and grinding machine used in this experiment is rotary type surface grinding m/c equipment with an ELID unit. The surface ground using the SD8000 wheels showed that mirror like surface roughness can be attained near 2~6 nm in Ra.

스트레이트 숫돌에 의한 대직경 Si-wafer의 ELID 경면연삭 (Mirror Surface ELID Grinding of Large Scale Diametral Silicon Wafer with Straight Type Wheel)

  • 박창수;김경년;김원일
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2001년도 춘계학술대회 논문집
    • /
    • pp.946-949
    • /
    • 2001
  • Mirror surface finish of Si-wafers has been achieved by rotary in-feed machining with cup-type wheels in ELID grinding. But the diameter of the workpiece is limited with the diameter of the grinding wheel in the in-feed machining method. In this study, some grinding experiments by the rotary surface grinding machine with straight type wheels were conducted, by which the possible grinding area of the workpiece is independent of the diameter of the wheels. For the purpose of investigating the grinding characteristics of large scale diametral silicon wafer, grinding conditions such as rotation speed of grinding wheels and revolution of workpiece are varied, and grinding machine used in this experiment is rotary type surface grinding m/c equipped with an ELID unit. The surface ground using the SD8000 wheels showed that mirror like surface roughness can be attained near 2~6nm in Ra.

  • PDF