• Geophysics and Geophysical Exploration
• /
• v.7 no.1
• /
• pp.1-6
• /
• 2004

High-resolution S-wave reflection surveying has been successfully conducted on paved areas using a Land Streamer originally designed by the author. The main feature of the Land Streamer tool is the non-stretch woven belt on which geophone units are mounted to form a multichannel geophone array similar to a marine streamer. Because it is easily towed by a vehicle or by hand, the tool leads to high performance in field measurements and resultant cost-effectiveness of high-resolution reflection surveys. Although each geophone unit is coupled to the pavement through a metallic baseplate instead of being firmly planted in the ground, the Land Streamer tool provides comparatively clean data, unaffected by traffic noise even on the pavement. Thus, the tool is capable of expanding the opportunity for S-wave reflection surveys in urban areas where many surfaces are paved and traffic noise is severe. A series of high-resolution S-wave reflection surveys on paved areas delineated detailed structures of surface layers shallower than 60 m, and proved the wide applicability of the tool to engineering, environmental applications, and earthquake disaster prevention projects.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.5 s.108
• /
• pp.490-499
• /
• 2006

In this paper, we present the newly developed propagation toss model of a long range maritime communication channel, measured by a ground to air flight test, and discuss its validity compared with the predictive value based on the spherical earth reflection model. To measure the propagation loss, actual flight test was performed in the Yellow Sea and the measurement of receiving signal strength was made for overall test range. As far as the test condition is concerned, it is expected that the receiving signal strength must be interfered with the reflected wave by an island existing around the reflection point. Therefore we introduce some modifications on the conventional spherical earth reflection model by including the effect due to the reflected wave from the island. And then, we compare the path loss measured by flight test with that one analyzed by the spherical earth reflection model accounting for reflected wave of the island. As a result of the comparison, it is verified to predict the path loss accurately by the spherical earth reflection model including the effect due to the reflected wave from an island for a long range ground to air communication.

• Fibers and Polymers
• /
• v.6 no.2
• /
• pp.127-130
• /
• 2005

Intrinsic UV reflection and fluorescence behaviors of polycarbonate, polyurethane and poly(ethylene terephthalate) films were investigated in order to characterize the interaction of water in these films. During water sorption process, UV reflection spectra of polycarbonate and polyurethane films showed little peak position changes. Fluorescence emission spectra of polycarbonate films showed red spectral shifts from 332 nm with water immersion time. This red-shifted peak could be due to phenyl-2-phenoxybenzoate, which is one of the major thermal degradation products in polycarbonate. Fluorescence peaks of polyurethane films appeared at two different positions and the ratio of these peak intensities increased with increasing immersion time. In the case of PET films, the UV reflection spectrum showed the peak intensity around 340 nm to change in response to water sorption. The fluorescence near 388 nm probably due to ground state dimer exhibited sensitivity with water sorption, when excited at 340 nm.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1984.12a
• /
• pp.45-45
• /
• 1984

• 한국지구물리탐사학회:학술대회논문집
• /
• 2000.09a
• /
• pp.158-172
• /
• 2000

In order to visualize mine cavities, 3D seismic reflection data were acquired at the ground subsidence sites near Nampung coal mine area, Neukguri, Dogye, Samchuck. Full range 3D array with complete range of azimuths on the bins was considered in the data acquisition design. Because of poor S/N data, we estimated the stacking velocities by CVS method, and we estimated the shot and receiver statics on the shot and receiver stack data. We could confirm that features of ground collapse that were expected from the subsidence. In order to visualize the cavities, we need to apply more sophisticated processing schemes, such as velocity analysis, residual statics correction.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.2
• /
• pp.140-147
• /
• 2011

In this paper, we propose a novel feeding method that uses a windshield ground in a vehicle. The feeding method enables for various antennas to integrate easily in a vehicle windshield. To connect a coaxial feeding cable directly to the windshield ground, we inserted a coaxial-to-ground adapter between the cable and the ground, and reflection coefficients using the proposed feeding method were compared to that using a conventional feeding method. The size and position of the windshield ground were optimized in order to achieve a high radiation gain in the azimuth direction. Then the triangular WiBro patch antenna, incorporating the proposed feeding method, was designed and installed on a rear windshield of a commercial sedan. The antenna using the proposed feeding method shows a similar reflection coefficient, and it shows 2 dB increased average azimuth radiation gain compared to that using a conventional sash ground method. These results demonstrate that the proposed feeding method can be applicable for integrating multiple antennas in a rear windshield.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.8
• /
• pp.55-63
• /
• 2018

In this paper, we measured the propagation path loss by a ground to air flight communication test at UHF band and analyzed the results. The ground receiving terminal was located at 1,100m above sea level in Cheju Island and the airborne transmit terminal flew at an altitude of 3.5km from 150 to 220km from the ground terminal. In this case, the ground terminal and the airborne terminal are on the Line of Sight. Therefore loss in this communications environment can be predicted based on Free Space Loss. However, in this test, the sea level exists between two terminals, and due to the very small angle of incidence on the reflecting surface due to the long-range communication environment, it is not possible to accurately predict the loss of free space only. Therefore, considering that there are no surrounding obstacles and that a line of sight is secured between the end of two terminals, we applied a plane earth reflection model and a spherical earth reflection model to estimate the propagation path loss and compared with the actual test results. As a result of the comparison, the predicted propagation path loss by a spherical earth reflection model were quite similar to the actual test values.

• Journal of the Korean Geophysical Society
• /
• v.1 no.1
• /
• pp.59-68
• /
• 1998

Ground penetrating radar (GPR) experiments were performed in a sand tank to study the ability of detection of buried pipes and to characterize the signal of the reflection wave. The ratios of diameter of buried pipes to the depth were set 4 up to 24 % and materials were metal, synthetic resin, and wood. In case of groundwater table below buried materials, strong reflection signals were observed irrespective of diameter and depth except for wood. While it is very difficult to detect the reflection signals in case that the groundwater table is set to higher than buried materials. The reflection signals from the bottom of the sand tank, however, were clearly observed even in case of higher groundwater table. This implies that the weak reflection signals from the buried materials are not all due to the wave attenuation. The vertical reflection profiling method is recommended in case that the object of the survey is to find horizontal position of buried material because this method has the advantage in cost and time of survey. However, the full or partial CMP gather method is recommended in case that the objects of the survey are to get the detailed subsurface information, i.e. the depth to buried material, interval velocity of geological layer, and mapping the groundwater table.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.325-328
• /
• 2005

To estimate presumptive local ground subsidence area near Abandoned Under ground Coal Mine(AUCM) at Samcheok city in Korea, the geological properties of existing ground subsidence area and the geophysical prospecting data were analyzed using GIS. The electrical resistivity survey and seismic reflection survey database were constructed from investigation reports and factors which are related with ground subsidence such as geological map, topological map, land use map, lineament map, groundwater level, RMR (Rock Mass Rating), mining tunnel map and slope database were constructed also to make a comparative study of each parameters. As a result of the spatial analysis of existing ground subsidence area, 9 major factors causing ground subsidence were extracted and a connection between the structure of underground and the ground subsidence was determined from the analysis of geophysical prospecting data. The estimation of presumptive ground subsidence area was performed using the correlation between the result from neural network analysis of 9 factors and the scrutiny of geophysical prospecting data.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.2
• /
• pp.357-363
• /
• 2000

The received field strength is varied with the electrical characteristics of the reflection medium in the case of the line-of-sight. To obtain the electrical characteristics of medium, the relationship between reflection coefficients and complex dielectric constants of the medium is derived, and a equation of circle which is related to reflection coefficient and ratio of transmitted power to received one is represented. A algorithm is proposed, which is to predict the electrical characteristics of the medium by using the received field strength.