• Geomechanics and Engineering
• /
• 제20권4호
• /
• pp.275-285
• /
• 2020

Excavation usually induces considerable ground settlement in soft ground, which may result in damage of adjacent buildings. Generally, the settlement is predicted through elastic-plastic finite element method and empirical method with defects. In this paper, an analytical solution for predicting ground settlement induced by excavation is developed based on the definition of three basic modes of wall displacement: T mode, R mode and P model. A separation variable method is employed to solve the problem based on elastic theory. The solution is validated by comparing the results from the analytical method with the results from finite element method(FEM) and existing measured data. Good agreement is obtained. The results show that T mode and R mode will result in a downward-sloping ground settlement profile. The P mode will result in a concave-type ground settlement profile.

• 한국전자파학회논문지
• /
• 제26권11호
• /
• pp.951-959
• /
• 2015

최근 휴대 단말기 안테나의 소형화와 고성능화에 대한 요구가 증대되고 있다. 단말기의 그라운드는 좋은 방사체로, 이를 활용한 휴대 단말기 그라운드 방사 안테나는 안테나의 소형화 및 고성능화를 동시에 만족시킬 수 있기 때문에, 많은 관심을 받고 있다. 그라운드 방사 안테나는 단말기 그라운드의 특성 모드를 제어하고, 이를 안테나와 결합하여 그라운드를 방사체로 활용하기 때문에 그 방사 성능이 우수하다. 본 논문에서는 그라운드의 특성 모드 이론에 대해 설명하고, 이를 활용한 그라운드 방사 안테나의 다양한 적용 예시를 단일 대역, 광대역 및 이중 대역 그라운드 방사 안테나로 나누어 소개하고자 한다.

• 대한의용생체공학회:의공학회지
• /
• 제39권2호
• /
• pp.103-108
• /
• 2018

This study reviews the common-mode noise model of indirect-contact ECG measurement which uses capacitive electrode and capacitive ground, and shows the reason of the large common-mode noise in indirect-contact ECG. And then, this study shows driven-right-leg ground in indirect-contact ECG measurement, and reviews how the driven-right-leg ground reduces the common-mode noise. This study then analyzes the relation between the effective area of the indirect-contact ground and the gain of the driven-right-leg circuit. This study introduces the output voltage saturation of the driven-right-leg circuit, which occurs frequently in indirect-contact ECG measurement with the condition of the high ground impedance. This study then shows the effect of the driven-right-leg circuit saturation on the common-mode noise.

• 항공우주시스템공학회지
• /
• 제1권4호
• /
• pp.13-21
• /
• 2007

As one of YHF digital data link technologies, VDL Mode 2 is designed to be an air-to-ground subnetwork of the Aeronautical Telecommunication Network (ATN) based on the Open System Interconnection (OSI) architecture. VDL Mode 2 can be used in ATS Applications especially for CPDLC and ADS. And it is also expected to replace ACARS (Aircraft Communications Addressing and Reporting System) which has broadly been used in AOC for over 20 years. This paper presents the design result of VDL Mode 2 system under AOA (ACARS Over AVLC) environment for the implementation of bit-oriented ATS applications. The system is composed of airborne and ground subsystem. Airborne subsystem consists of VDR, CMU and an aircraft test equipment with CPDLC/ADS client applications for operational test and ground system consists of Ground Station which includes ground VDR and ground communication controller, simple DSP (Datalink Service Processor) and a ground test equipment with CPDLC/ADS server applications.

• ETRI Journal
• /
• 제33권1호
• /
• pp.121-124
• /
• 2011

Digital harmonics, which may reduce the radio frequency sensitivity of a system, can be coupled with an antenna in a mobile handset. This letter presents a decoupling method for increasing the isolation between digital harmonics on a flexible printed circuit board (FPCB) and an antenna in terms of the ground mode current and the concept of reaction. We model the signal and ground lines in an FPCB as a loop circuit exciting a ground mode current and demonstrate a simple but efficient decoupling method for reducing the excited ground mode current.

• ETRI Journal
• /
• 제40권2호
• /
• pp.180-187
• /
• 2018

In this paper, we introduce a ground radiation antenna that uses controlled endless metal rim modes. In the proposed technique, the metal rim mode is tuned and excited as a one-wavelength radiator by a small ground radiation antenna. The proposed antenna occupies a clearance of $1mm{\times}4mm$ in a $30mm{\times}20mm$ ground plane. A metal rim with dimensions of $34mm{\times}24mm$ surrounds the ground plane, and the metal rim is separated from the ground plane by a gap of 2 mm. In addition, a lumped capacitor is inserted between the metal rim and the ground plane to control the characteristic mode of the metal rim such that the resonance of the metal rim is tuned to be equal to the operating frequency. By performing simulations and measurements, we compare the performance of the proposed antenna with that of a reference antenna that does not have an inserted capacitor between the metal rim and the ground plane. The results show that a significant improvement of the radiation performance is obtained by employing the proposed technique.

• 전기전자학회논문지
• /
• 제23권2호
• /
• pp.474-478
• /
• 2019

본 논문에서는 휴대단말기 내의 디지털 노이즈와 안테나 사이의 결합(coupling)으로 인한 수신감도 저하 현상을 특성 모드(characteristic mode)를 사용해서 분석한다. 우선, 안테나와 디지털 잡음의 결합 메커니즘(mechanism)을 분석하고, 카메라 노이즈로 인한 안테나 수신감도 열화현상의 개선 방법 중 하나인 그라운드(ground) 선의 디커플링 커패시터(decoupling capacitor, decap)의 역할에 대해서도 분석한다. 분석을 위해서 카메라 모듈의 FPCB의 디지털 신호 선과 그라운드 선을 PCB 그라운드의 특성 모드를 여기(excitation) 시키는 루프(loop)형 피더(feeder)로 모델링 했고, 그라운드 선과 커패시터를 추가한 개선 모델에 대해서 분석을 했다.

• Journal of electromagnetic engineering and science
• /
• 제19권1호
• /
• pp.1-5
• /
• 2019

In this study, optimum locations for a loop-type ground radiation antenna are evaluated for C-shaped ground planes of two different sizes. To achieve good radiation performance, the antenna needs to be located such that it couples with the dominant current mode of the ground plane. Antenna locations are proposed using the characteristic mode analysis of the ground planes. The measured bandwidths of the antennas at the proposed locations have more than twice the bandwidths of the cases in which the antennas are coupled with non-dominant modes. The operating frequency of the antennas is 2.45 GHz.

• 한국정밀공학회지
• /
• 제16권10호
• /
• pp.182-186
• /
• 1999

Structural ceramics such as $Al_2O_3$, SIC, and $Si_3N_4$ are difficult to grind materials because of their high hardness and brittleness. They are normally ground in brittle mode, but it is possible to be ground in ductile mode depending upon the grinding conditions. In this paper an experimental investigation has been carried out to see the relationship between the grinding energy and grinding mode. It has been found that the ductile mode grinding consumes more grinding energy than the brittle mode grinding. Thus, the grinding conditions of the higher specific grinding energy leads to the plastic deformation in the ground surface of workpiece and results in the better surface finish.

• 한국전자파학회논문지
• /
• 제29권1호
• /
• pp.28-31
• /
• 2018

본 논문에서는 균일원형배열(UCA) 안테나를 이용한 궤도각운동량(OAM) 다중모드 전송시스템의 채널용량에 대하여지면 반사가 미치는 영향을 수치적으로 분석하였다. 지면 반사는 OAM 다중모드 간 간섭을 유발하고 시스템의 심각한 성능 저하를 가져온다. 전송거리가 증가함에 따라 OAM 다중모드 채널용량은 지면 반사의 영향으로 인하여 매우 작아진다. 지면 반사의 영향을 줄이기 위해서는 UCA의 높이를 높이고, 배열 소자의 지향성을 높이는 것이 필요하다.