• Journal of the Korean Wood Science and Technology
• /
• v.10 no.1
• /
• pp.38-46
• /
• 1982

The research was carried out to determine the division of juvenile and adult wood from the pattern of variables of wood quality indicators, to investigate general low of the size of juwenile wood and to study the characteristics of juvenile and adult wood. For this study some trees of Pinus koraiensis were selected and several wood quality indicators such as annual ring width. late wood percentage, tracheid length tracheid diameter, wall thicknes, and microfibril angles were measured. The results of this study were summaried as follows. 1) Juvenile and adult wood can be divided into radial variations of wood quality indicators. In this study juvenile wood might be classified as a large fluctuated region of radial wood quality variations in the nearest part to pith. 2) Juvenile wood was indicated as a part of nearly cylinderical shape, averaging 6-11cm in radius, near pith. 3) Number of rings from pith of juvenile wood was about 12-20 and was nearly constant in uniform growth trees among the forest stands. 4) Usually adult wood was formed within the about 5-10m above ground.

• Korean Journal of Ecology and Environment
• /
• v.48 no.2
• /
• pp.77-85
• /
• 2015

Siniperca scherzeri is major target species for restocking and restoration project as it is one of the economic species in South Korea. In this study, to investigate their ecological characteristics movement pattern and habitat characteristic of S. scherzeri were analyzed using radio telemetry. Three specimens released during spawning season, moved more than 10 km toward upstream from the release site. Whereas the remains released after spawning season, settled within 400 m of their release site except two specimens (Ss 11, 3.2 km; Ss, 15, 1.4 km). One of possible reason of upstream movement during spawning season is reproduction. The conditions of their settlement area is similar with reference conditions of their spawning ground. S. scherzeri were mainly detected near the edge of the water, and it may related with the facts that rocks are mainly located at the edge of the water and S. scherzeri prefers rocks for their shelter. AMD (Accumulated movement distance) positively related with body weight and condition factor K, but no significant relationship was identified with gender and total length. Daily movement boundary of S. scherzeri was $214.94m^2{\sim}3,257.19m^2$, and their movement was restricted near the edge of the water. The results of this study could be useful to restocking and restoration.

• Korean journal of food and cookery science
• /
• v.21 no.6 s.90
• /
• pp.919-926
• /
• 2005

The effects of the addition of germinated whole soy flour on dough and noodle characteristics were investigated in this study. The soybeans were germinated for 12 hours at $20^{\circ}C$ and ground to 60 mesh. With increasing soybean flour addition up to $16\%$, the RVA viscograph and mixograph properties were significantly decreased both with and without the addition of $3\%$ salt(p<0.05). The width and length extensibility were increased with increasing whole soy flour addition up to $8\%$ after which they decreased. The addition of the whole soy flour turned the color of the wet and cooked noodle a little darkish and greenish yellow. The hardness and gumminess of wet noodle increased with increasing whole soy flour amount, while those of cooked noodle gradually decreased. Sensory evaluation showed that addition of tile whole soy flour significantly increased the savory flavor and yellowish color of cooked noodle.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.12 no.3
• /
• pp.164-178
• /
• 2009

This study was aimed to make GIS oiling thematic maps and analyze temporal oiling variation patterns for two months after 'Hebei Spirit' oil spill accident in December 7, 2007 using GIS and oiling status surveyed data. As a basic work for making of oiling thematic maps, geometric corrections were performed with IKONOS images using ground control points data. These corrected images were used to make detailed coastline from digital charts, and then spatial unit of coastline were defined using classified coastline types. And to know the representative parameters which reflect oiling situation, relationship between oiling status parameters extracted from four times oiling assessment reports and total petroleum hydrocarbons (TPHs) data (December 2007 and January 2008) monitored by Korea Ocean Research and Development Institute (KORDI). Using these representative oiling status parameters pollution value were calculated, and they were keyed into spatial unit of coastline as attributive value. GIS oiling status thematic maps made with coastline containing pollution value showed the initial two month's situations somewhat well. Also, to analyze temporal variation pattern of coastline types, about 13.4km length coastline around Malripo beach was defined as detailed study area where is the common spatial zone surveyed oiling status by each organizations. Based on this study results, it could be possible to provide oiling status maps quickly and to support decision making for oiling control action and scientific pollution monitoring.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.10a
• /
• pp.72-72
• /
• 2019

This study compared the growth characteristics of A. gigas according to the transplanting season, in the cultivation located in Yeongju, Gyeongsangbuk-do, transplanted in the autumn and spring. As a result of that the plant survival rate were observed the highest autumn transplanting (9.4%; autumn-92.2%, spring-82.8%) and bolting rate were observed lowest spring transplanting (7.1%; autumn-37.3%, spring-30.2%). Growth characteristics (height, leaf length and width, stem diameter) were observed the highest autumn transplanting in June and highest spring transplanting in August. The early growth is high growth due to long rooting time in autumn transplanting, but the difference in the ground growth between the two experiments was insignificant when the main growth period was from June to August. Further analysis of the growth characteristics and marker components of roots of A. gigas can be used to determine the optimal planting time and the establishment of high quality cultivation technology.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.6
• /
• pp.25-32
• /
• 2021

In this study, it proposes a mode converter that is relatively easy to implement and can shorten the transmission line length of the final combining port and it was fabricated and tested by applying it to an 8-way spatial combiner. The proposed mode converter converts the signal converted from the doorknob-shaped circular disk connected to the ground into the TM₀₁ mode by opening it in the circular waveguide. The 8-way waveguide spatial combiner is designed and implemented so that 8 signals input from the H-plane are combined in a circular waveguide at the center, and the final combining mode is TM₀₁. The test results confirmed excellent performance with an insertion loss of less than 0.4dB and a combining efficiency of 95% or more. In addition, it was confirmed that it is suitable for high output by calculating the breakdown voltage and discharge threshold power of the new mode conversion structure through electric field analysis. The results confirmed through this study are expected to be applicable to high-power, high-efficiency SSPA in various fields in the future.

• Journal of Cadastre & Land InformatiX
• /
• v.51 no.1
• /
• pp.23-38
• /
• 2021

In this paper, we analyzed the possibility of utilizing LX-PPS GNSS permanent stations whose antennas are installed on the building rooftop for the purpose of high-precision GNSS positioning services. We picked 15 pairs of adjacent GNSS permanent stations operated by LX-PPS and NGII, and then produced 3-year-long time series using the high-precision data processing software called GIPSY. Patterns and trends of position estimates were compared and analyzed. Horizontal and vertical deviations including the linear velocities coincide with the well-known crustal deformation rates of the Korean peninsula. We also observed almost the same annual or seasonal patterns from those nearby sites. After detrending the linear velocity, the amplitude and phase of annual signals almost perfectly match each other within the baseline length of 2 km. By subtracting seasonal signals, the RMS and standard deviations in LX-PPS PPGR with respect to NGII KANR are about 1, 2, and 5 mm in the north-south, east-west, and vertical directions, respectively. From this analysis it can be concluded that the rooftop-installed LX-PPS sites show similar level of stability and positioning performance comparable to those ground-mounted NGII stations.

• Korean Journal of Ecology and Environment
• /
• v.53 no.4
• /
• pp.445-452
• /
• 2020

In this study, we carried out a distribution and migration boundary lines of chum salmon (Oncorhynchus keta) in the Milyang River. We measured the total length of dead chum salmons. As a results, 40 chum salmons were found during the study period, 25 dead salmons and 15 alive individuals. The ratio of female was 64%. We verified the migration boundary lines of chum salmons based on a sighting survey until detecting a structure that chum salmons are not able to migrate upstream. We discovered that chum salmons were not able to migrate up to 13 km in a mainstream of the Milyang River and up to 12 km in the Danjang stream (a tributary of the Milayang River) from upstream of the Yerim Bridge. Therefore, our results indicate that Milyang River should improve a river connectivity by demolishing weirs that disturb chum salmon's migration or installing appropriate fishways. Also, effective legislations are needed to retain naturality in spawning ground and micro-habitats to increase the survival rate of parrs and smolts.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.1
• /
• pp.59-66
• /
• 2022

In order to solve the problem of urban traffic congestion, Urban Air Mobility (UAM) concept using Electric Vertical Take-off and Landing (eVTOL) aircraft has been gaining popularity, and many domestic and international studies are underway. However, since these aircraft inevitably fly over densely populated areas, it is essential to ensure safety, which starts with accurately analyzing the crash risk. In this paper, the locations and impact speeds of crash are computed using six degree-of-freedom simulations of an eVTOL aircraft in a fixed-wing mode. System malfunction was modeled by a sudden loss of thrust with control surfaces being stuck during cruise. Because most of these eVTOL aircraft are still under development, a methodology of constructing a six degree-of-freedom dynamics model from generic specification is also developed. The results show that the crash locations are highly concentrated right under the aircraft within a square that has an edge length similar to the cruise altitude. Speed distribution is more complicated because almost identical crash locations can be achieved by two very different paths resulting in a large variation in the speeds.

• Journal of Korean Society of Forest Science
• /
• v.111 no.4
• /
• pp.644-650
• /
• 2022

Aralia elata (Miq.) SEEM is a deciduous shrub that has attracted attention as a high-income forest product. To improve the efficiency of cultivation and increase income, productivity according to the pruning period and annual pruning after harvesting Aralia elata shoots was analyzed. The optimal time was determined by pruning five times at 2-week intervals from 6 days after shoot harvesting. To investigate the pruning effect, pruning was performed at 30 cm from the ground in the first year after planting. From the second year after planting, branches grown for 1 year were pruned to 10 cm, and the annual shoots and branches were compared. Thenumber of first pruned branches after 6 days was 1.3-2.1 times higher after shoot harvesting than at other times, and the shoot characteristics were 1.2-1.7 times better than those at other periods. The faster the pruning, the better the quality of the harvested shoots. Annual pruning produced high-quality shoots (approximately 1.5 cm in diameter and 16 cm in length) from the second year after planting, and it was possible to increase productivity by inducing generation of branches capable of harvesting shoots. Annual pruning also made it possible to maintain easy shoot harvesting at approximately150 cm. These results showed that it was efficient to perform Aralia elatapruning as early as approximately 6 days after shoot harvesting. Pruning enabled production ofuniform-quality shoots every year and increasedthe yield of the trees.