• Korean Journal of Remote Sensing
• /
• v.30 no.5
• /
• pp.627-639
• /
• 2014

Accurate correction of surface effect from back scattered solar radiance is one of key issue to retrieve aerosol information from satellite measurements. In this study, two different methods are applied to retrieve surface reflectance by using single visible channel measurement from meteorological imager onboard COMS. The first one is minimum reflectance method, which composes the minimum value among previously measured reflectances at each pixel over a certain search window length. This method assumes that the darkest pixel corresponds to the aerosol-free condition, and deduces surface reflectance by correcting atmospheric scattering from the measured visible reflectance. The second method, named as the "atmospheric correction method" in this study, estimates the result by correcting aerosol and atmospheric scattering with ground-based observation of aerosol optical properties. The purpose of this study is to investigate the retrieval accuracy of the widelyused minimum reflectance method. Also, the retrieval error caused by the loading of background aerosol is mainly estimated. The comparison between surface reflectances retrieved from the two methods shows good agreement with the correlation coefficient of 0.87. However, the results from the minimum reflectance method are slightly overestimated than the values from the atmospheric correction method when surface reflectance is lower than 0.2. The average difference between the two results is 0.012 without the background aerosol correction. By considering the background aerosol effect, however, the difference is reduced to 0.010.

• Korean Journal of Remote Sensing
• /
• v.30 no.5
• /
• pp.587-596
• /
• 2014

Soil moisture is one of the most important interests in hydrological response and the interaction between the land surface and atmosphere. Estimation of Antecedent Wetness Conditions (AWC) which is soil moisture condition prior to a rainfall in the basin should be considered for rainfall-runoff prediction. In this study, Soil Wetness Index (SWI), Antecedent Precipitation Index ($API_5$), remotely sensed Soil Moisture ($SM_{rs}$), and 5 days ground Soil Moisture ($SM_{g5}$) were selected to estimate the AWC at four study area in the Korean Peninsula. The remotely sensed soil moisture data were taken from the AMSR-E soil moisture archive. The maximum potential retention ($S_{obs}$) was obtained from direct runoff and rainfall using Soil Conservation Service-Curve Number (SCS-CN) method by rainfall data of 2011 for each study area. Results showed the great correlations between the maximum potential retention and SWI with a mean correlation coefficient which is equal to -0.73. The results of time length representing the time scale of soil moisture showed a gap from region to region. It was due to the differences of soil types and the characteristics of study area. Since the remotely sensed soil moisture has been proved as reasonable hydrological variables to predict a wetness in the basin, it should be continuously monitored.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.34-34
• /
• 2012

Heavy storms rainfall has caused many landslides and slope failures especially in the mountainous area of the world. Landslides and slope failures are common geologic hazards and posed serious threats and globally cause billions in monetary losses and thousands of casualies each year so that studies on slope stability and its failure mechanism under rainfall are being increasing attention of these days. Rainfall-induced slope failures are generally caused by the rise in ground water level, and increase in pore water pressures and seepage forces during periods of intense rainfall. The effective stress in the soil will be decreased due to the increased pore pressure, which thus reduces the soil shear strength, eventually resulting in slope failure. During the rainfall, a wetting front goes downward into the slope, resulting in a gradual increase of the water content and a decrease of the negative pore-water pressure. This negative pore-water pressure is referred to as matric suction when referenced to the pore air pressure that contributes to the stability of unsaturated soil slopes. Therefore, the importance is the study of saturated unsaturated soil behaviors in evaluation of slope stability under heavy rainfall condition. In an actual field, a series of failures may occur in a slope due to a rainfall event. So, this study attempts to develop a numerical model to investigate this failure mechanism. A two-dimensional seepage flow model coupled with a one-dimensional surface flow and erosion/deposition model is used for seepage analysis. It is necessary to identify either there is surface runoff produced or not in a soil slope during a rainfall event, while analyzing the seepage and stability of such slopes. Runoff produced by rainfall may result erosion/deposition process on the surface of the slope. The depth of runoff has vital role in the seepage process within the soil domain so that surface flow and erosion/deposition model computes the surface water head of the runoff produced by the rainfall, and erosion/deposition on the surface of the model slope. Pore water pressure and moisture content data obtained by the seepage flow model are then used to analyze the stability of the slope. Spencer method of slope stability analysis is incorporated into dynamic programming to locate the critical slip surface of a general slope.

• Land and Housing Review
• /
• v.4 no.3
• /
• pp.279-286
• /
• 2013

Driving a prefabricated pile is the efficient construction method with low cost and excellent bearing capacity charateristics. But pile drinving method has often been changed to bored pile method with mechanical boring due to the unexpected problems occurred in the various domestic ground condition with landfill. So, pile driving method has more uncertainty than the Bored Pile method. This paper proposed LRFD design value which is one of limit states design method for the PHC driven pile used as building foundation to guarantee the reliable design with reduced uncertainty. This paper analysed 221 dynamic load test results(E.O.I.D : 93, Resrike : 128) and the different methods of estimating bearing design(Meyerhof method & SPT-CPT conversion method), and proposed LRFD value for each design reliability Index 2.33 and 3.0 for PHC driven pile. LRFD value of PHC driven pile represents 0.43~0.55 for Meyerhof method and 0.40~0.49 for SPT-CPT conversion method according to the deign reliability index.

• Korean Journal of Ecology and Environment
• /
• v.48 no.2
• /
• pp.77-85
• /
• 2015

Siniperca scherzeri is major target species for restocking and restoration project as it is one of the economic species in South Korea. In this study, to investigate their ecological characteristics movement pattern and habitat characteristic of S. scherzeri were analyzed using radio telemetry. Three specimens released during spawning season, moved more than 10 km toward upstream from the release site. Whereas the remains released after spawning season, settled within 400 m of their release site except two specimens (Ss 11, 3.2 km; Ss, 15, 1.4 km). One of possible reason of upstream movement during spawning season is reproduction. The conditions of their settlement area is similar with reference conditions of their spawning ground. S. scherzeri were mainly detected near the edge of the water, and it may related with the facts that rocks are mainly located at the edge of the water and S. scherzeri prefers rocks for their shelter. AMD (Accumulated movement distance) positively related with body weight and condition factor K, but no significant relationship was identified with gender and total length. Daily movement boundary of S. scherzeri was $214.94m^2{\sim}3,257.19m^2$, and their movement was restricted near the edge of the water. The results of this study could be useful to restocking and restoration.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.7
• /
• pp.23-33
• /
• 2015

This paper is results of numerical study for application of sheet pile retaining wall reinforced with H-pile as sheet piles are needed in field for a cutoff wall and are limited to use because of driveability in the ground condition of having a larger strength than a weathered rock. Extensive 101 cases of numerical approach were conducted to investigate the behavior of sheet pile retaining wall reinforced with H-pile, changing installing members of two types of sheet pile and three types of H-pile, the embedded depth of sheet pile and H-pile, the horizontal space between H-piles and excavation conditions. As the results of numerical analysis, combined use of the sheet pile SP-IIIA with H-Pile H250 and the sheet pile SP-IV with H-Pile H350 among precast products was found to be efficient since two members tended to reach allowable stresses simultaneously or have similar stress concentration ratios. Increased stiffness in reinforced sheet pile showed reduction of lateral displacement of wall. Embedded depth of sheet pile did not affect stability of wall significantly so that driving the penetrable depth of sheet pile should be enough to maintain stability of wall and satisfy purposes of cutoff and stiffness increase of wall.

• FLOWER RESEARCH JOURNAL
• /
• v.17 no.1
• /
• pp.15-22
• /
• 2009

This study was conducted to examine characteristics of rhizome growth and flowering of white lotus (Nelumbo nucifera) plant in Muan Hoesan-lake for collecting the basic data on the cultivation and the flowering which is growing in Muan Hoesan-lake of Jeonnam province in Korea. We have planted from the seeds and the enlarged rhizomes of the white lotus which were planted in the plastic containers on April 20 and May 4, 2008, and cultivated under rain shelter condition. Rhizome growth pattern and the flowering characteristics of the white lotus were examined on September 4, 2008. Main rhizomes of the white lotus propagated by the seeds and the enlarged rhizomes were branched by 10% and 15%, respectively. Numbers of nodes in the bloomed and non-bloomed rhizomes of the white lotus were over 14 and below 11, respectively. Flower was not observed in the white lotus when propagated with seeds, however, flowers came out up to 80% by the enlarged rhizomes. First flowers were bloomed from the late July and to the early August, and the number of flowers were 4.0~4.4. The first flower stalks without branching of the main rhizome were emerged in 8.8th node, however, that with branching were 8.0th node. Time to flowering from the emergence of flower stalk on the above-ground parts were required 16 days. White flowers from the lotus were 15.3 cm in height and 28.2 cm in width, their longevity was 3.3 days and the averaged flower fresh weight was 29.2 g. The results conclude that optimum number of nodes on the main rhizomes for blooming the white lotus flowers should be over 8 nodes before the rhizome enlargement.

• Korean Journal of Remote Sensing
• /
• v.24 no.4
• /
• pp.351-358
• /
• 2008

KOMPSAT-5 will be launched in 2010 carrying a SAR (Synthetic Aperture Radar) system to obtain high resolution images of the earth surface regardless of weather or solar condition. In this paper, the orbits of KOMPSAT-5 and the imaging modes of SAR were analyzed for radargrammetry, and the best image pairs were suggested. We set the pass number from the nearest orbit to a given ground point and selected image pairs for radargrarnmetry, with height sensitivity of parallax higher than 0.5 to achieve enough height resolution and with the value lower than 0.8 to avoid errors from geometric distortion. On the equator, for example, where the distance between two adjacent passes is fixed to 95 km, we solved the orbit geometry and found that the image pairs with the pass numbers of 3-2 and 5-3 are suitable for radargrarnmetry. As the examples with arbitrary latitude, we selected Daejeon and Sejong Antarctic stations and calculated the orbital elements by using STK software. Three image pairs (5-4, 7-5 and 8-5) were found suitable for radargrammetry at Daejeon while 10 pairs (8-6, 9-7, 10-7, 11-8, 12-8, 13-9, 14-9, 15-9, 15-10 and 15-11) at Sejong Antarctic station.

• Korean Journal of Comparative Education
• /
• v.22 no.4
• /
• pp.1-24
• /
• 2012

This comparative study attempts to explore in what politico-social context 'Education Welfare Invest Priority Zone Plan' has been developed and to find politico-social implications of Korean EWIPZP through critically comparing the cases of UK and France. Korean financial crisis brought up the importance of 'Education Welfare' turning into a concrete system, 'EWIPZP' in 2003. This educational welfare policy has expanded since 2005 up to now by the changed name of 'Education Welfare Priority Plan' in 2008, that is structurally different from the original framework which was to support schools in educationally disadvantaged areas. Even the cases of EAZ in UK and ZEP in France started by progressive political parties and established on the ground of 'equity' philosophy, turned into the excellence-based equality policy confronting with the harsh condition of neo-liberalistic global economy under the conservative regime. So does Korea under the critics against this tendency. Comparing Korean case with the cases in UK and France, the current Education Welfare Priority Policy in Korea should be back to the original principle of educational equity and transform into the bottom-up bilateral cooperation model from the top-down model by the authorized party itself in order not to be manipulated politically.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.4
• /
• pp.373-378
• /
• 2019

In the marine area, the salt concentration in the soil increases, and the inland heavy metal pollution increases the damage of plants. In the inland industrial development area, researches on the genetic resources of plants together with the heavy metal accumulation of Co, Ni, Zn, and so on are required. Both of these problems have caused scientists to work hard to find plants that are likely to cause stress in plant roots. In this study, seeds of Arabis stelleri var. japonica collected near the shore were used for germination. The growth and development and tolerance of both Arabis and Arabidopsis seeds were investigated under laboratory culture conditions. As a result, Arabis showed resistance about 3 times in 250 mM nickle and cobalt, and more than 4 times in 1 mM zinc when compared to Arabidopsis. The tolerance of Arabis to Na salts increased by 20% or more at 50 mM concentration and Arabis was resistant to heavy metals and salt concentration. The accumulation of Na ions in the body was measured as a preparation for studying the intracellular mechanism. As a result, it showed a further decrease in resistance to ground water roots. It is considered that the activity of the exporting gene is important rather than the mechanism of accumulation.