• 제목/요약/키워드: Gross volume

검색결과 146건 처리시간 0.029초

쌀 식미 및 가공적성에 관련된 이화학적 특성 (Physicochemical Characteristics and Varietal Improvement Related to Palatability of Cooked Rice or Suitability to Food Processing in Rice)

  • 최해춘
    • 한국식품영양학회:학술대회논문집
    • /
    • 한국식품영양학회 2001년도 동계 학술심포지움
    • /
    • pp.39-74
    • /
    • 2001
  • The endeavors enhancing the grain quality of high-yielding japonica rice were steadily continued during 1980s∼1990s along with the self-sufficiency of rice production and the increasing demands of high-quality rices. During this time, considerably great, progress and success was obtained in development of high-quality japonica cultivars and qualify evaluation techniques including the elucidation of interrelationship between the physicochemical properties of rice grain and the physical or palatability components of cooked rice. In 1990s, some high-quality japonica rice caltivars and special rices adaptable for food processing such as large kernel, chalky endosperm aromatic and colored rices were developed and its objective preference and utility was also examined by a palatability meter, rapid-visco analyzer and texture analyzer. The water uptake rate and the maximum water absorption ratio showed significantly negative correlations with the K/Mg ratio and alkali digestion value(ADV) of milled rice. The rice materials showing the higher amount of hot water absorption exhibited the larger volume expansion of cooked rice. The harder rices with lower moisture content revealed the higher rate of water uptake at twenty minutes after soaking and the higher ratio of maximum water uptake under the room temperature condition. These water uptake characteristics were not associated with the protein and amylose contents of milled rice and the palatability of cooked rice. The water/rice ratio (in w/w basis) for optimum cooking was averaged to 1.52 in dry milled rices (12% wet basis) with varietal range from 1.45 to 1.61 and the expansion ratio of milled rice after proper boiling was average to 2.63(in v/v basis). The major physicochemical components of rice grain associated with the palatability of cooked rice were examined using japonica rice materials showing narrow varietal variation in grain size and shape, alkali digestibility, gel consistency, amylose and protein contents, but considerable difference in appearance and torture of cooked rice. The glossiness or gross palatability score of cooked rice were closely associated with the peak. hot paste and consistency viscosities of viscogram with year difference. The high-quality rice variety “Ilpumbyeo” showed less portion of amylose on the outer layer of milled rice grain and less and slower change in iodine blue value of extracted paste during twenty minutes of boiling. This highly palatable rice also exhibited very fine net structure in outer layer and fine-spongy and well-swollen shape of gelatinized starch granules in inner layer and core of cooked rice kernel compared with the poor palatable rice through image of scanning electronic mcroscope. Gross sensory score of cooked rice could be estimated by multiple linear regression formula, deduced from relationship between rice quality components mentioned above and eating quality of cooked rice, with high Probability of determination. The ${\alpha}$ -amylose-iodine method was adopted for checking the varietal difference in retrogradation of cooked rice. The rice cultivars revealing the relatively slow retrogradation in aged cooked rice were Ilpumbyeo, Chucheongbyeo, Sasanishiki, Jinbubyeo and Koshihikari. A Tongil-type rice, Taebaegbyeo, and a japonica cultivar, Seomjinbyeo, shelved the relatively fast deterioration of cooked rice. Generally, the better rice cultivars in eating quality of cooked rice showed less retrogiadation and much sponginess in cooled cooked rice. Also, the rice varieties exhibiting less retrogradation in cooled cooked rice revealed higher hot viscosity and lower cool viscosity of rice flour in amylogram. The sponginess of cooled cooked rice was closely associated with magnesium content and volume expansion of cooked rice. The hardness-changed ratio of cooked rice by cooling was negatively correlated with solids amount extracted during boiling and volume expansion of cooked rice. The major physicochemical properties of rice grain closely related to the palatability of cooked rice may be directly or indirectly associated with the retrogradation characteristics of cooked rice. The softer gel consistency and lower amylose content in milled rice revealed the higher ratio of popped rice and larger bulk density of popping. The stronger hardness of rice grain showed relatively higher ratio of popping and the more chalky or less translucent rice exhibited the lower ratio of intact popped brown rice. The potassium and magnesium contents of milled rice were negatively associated with gross score of noodle making mixed with wheat flour in half and the better rice for noodle making revealed relatively less amount of solid extraction during boiling. The more volume expansion of batters for making brown rice bread resulted the better loaf formation and more springiness in rice bread. The higher protein rices produced relatively the more moist white rice bread. The springiness of rice bread was also significantly correlated with high amylose content and hard gel consistency. The completely chalky and large gram rices showed better suitability for fermentation and brewing. Our breeding efforts on rice quality improvement for the future should focus on enhancement of palatability of cooked rice and marketing qualify as well as the diversification in morphological and physicochemical characteristics of rice grain for various value-added rice food processings.

  • PDF

폐암의 정위적체부방사선치료에서 육안적종양체적 변화에 따른 적응방사선치료의 효용성 및 가능성 연구 (Feasibility and Efficacy of Adaptive Intensity Modulated Radiotherapy Planning according to Tumor Volume Change in Early Stage Non-small Cell Lung Cancer with Stereotactic Body Radiotherapy)

  • 박재원;강민규;예지원
    • 한국의학물리학회지:의학물리
    • /
    • 제26권2호
    • /
    • pp.79-86
    • /
    • 2015
  • 이 연구는 조기 폐암의 정위방사선치료에서 육안적종양체적(Gross tumor volume, GTV) 변화에 따른 적응방사선치료(ART)의 효과 및 가능성을 보기 위해 시행되었다. 영남대학교 의료원에서 정위방사선치료를 시행한 22개의 종양을 대상으로 연구를 진행하였다. 정위방사선치료는 2주에 걸쳐 48 혹은 60 Gy를 4회에 나누어 조사하는 방법으로 시행되었다. 종양체적 변화를 측정하기 위해 매 콘빔시티마다 육안적종양체적에 대한 윤곽선 그리기를 시행하였다. 그 다음 첫 번째 콘빔시티에 기준 치료계획으로 사용할 세기조절방사선치료 계획을 시행하였다. 적응방사선치료 계획을 하기 위해, 2, 3, 4번째 콘빔시티에 기준 치료계획과 동일한 빔 각도와 제약을 적용하여 각각 재 최적화 과정을 진행하였다. 이후 적응방사선치료 계획은 기준치료계획을 각각의 콘빔시티에 복사하여 생성한 비적응방사선치료 계획과 비교되었다. 평균 육안적종양체적은 10.7 cc였다. 평균 종양체적 변화는 두 번째, 세 번째, 네 번째 콘빔시티에서 각각 -1.5%, 7.3%, 25.1%였으며 세 번째 이후 변화는 통계적으로 유의하였다(p<0.05). 하지만 두 번째 콘빔시티에서는 9개의 종양 체적이 증가하였다. 적응방사선치료 계획을 시행하였을 때, 폐에서 $V_{20\;Gy}$, $D_{1500\;cc}$, $D_{1000\;cc}$가 유의하게 감소하였으며, 흉벽에 대한 $V_{30\;Gy}$$V_{32\;Gy}$ 역시 유의하게 감소하였다(p<0.05). 두 번째 콘빔시티의 종양체적이 증가한 환자들에서, 기준치료 계획에 비해 적응치료방사선치료 계획을 시행하지 않았을 때, 계획용 표적체적에 대한 선량 범위 변수 중 $D_{min}$은 8.3% 감소한 반면 (p=0.021), 적응방사선치료계획을 시행한 경우에는 차이가 없었다. 이러한 결과를 보았을 때, 적응방사선치료 계획을 함으로서 표적 선량 커버는 개선시키면서 손상위험장기에 대한 선량을 감소시킬 수 있을 것이다. 그러므로, 콘빔시티를 이용한 적응방사선치료 방법은 조기 폐암의 정위방사선치료에서 고려되어야 하겠다.

조직 내 삽입용 바늘을 이용한 자궁경부암의 강내치료에 관한 연구 (A Study on Intracavitary Therapy in Cervix Cancer Using Needle for Interstitial Therapy)

  • 조정근;정홍량;임청환;김정구;이만구
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제29권2호
    • /
    • pp.83-92
    • /
    • 2006
  • ICRU 38의 권고에 따른 치료계획과 PTV를 토대로 한 치료계획을 세워 환자의 움직임을 고려하여 설정한 종양 용적(이하 PTV라 표기) 전체를 치료하고 주변 정상조직에 선량을 최소화하는 방안에 대해 연구하고자 하였으며, 본 연구는 국립암센터 방사선종양학과에서 2002년 1월부터 2003년 2월까지 방사선치료와 항암화학 치료를 동시에 시행한 30명의 자궁경부암 환자를 대상으로 하였다. 병기의 분포는 각각 stage IB 1명, IIA 3명, IIB 19명, IIIA 3명, IIIB 3명, IV 1명이었다. 모든 환자에 대해 방사선치료를 시행하기 전에 MRI를 시행하였으며 MR 영상에서 원발종양용적(GTV: Gross Tumor Volume, 이하 GTV라 표기)의 최대 직경이 17명의 환자에서 4 cm 이하이었고, 12명은 $4{\sim}6\;cm$, 1명은 6 cm 이상이었다. 연구 결과 PTV 치료계획을 통해 잔류종양의 크기가 작은 경우 불필요하게 방사선이 조사되는 용적을 줄이면서(p<0.0001) 최적의 선량분포를 만들어 낼 수 있지만 종양의 크기가 큰 경우 오히려 전체 종양을 포함하는 치료계획을 수립할 때 주변 정상조직에 불필요하게 많은 선량이 투여되게 된다. 이러한 이유는 Fletcher Williamson Applicator의 구조상 일부분의 방사선 강도를 탄력적으로 조절하는데 한계가 있기 때문인 것으로 사료된다. 본 연구에서는 applicator의 한계를 극복하고 최적의 선량분포를 얻기 위하여 Fletcher Williamson Applicator에 조직내 삽입용 바늘 4개를 종양의 크기가 큰 10명의 환자 중 기하학적으로 바늘의 삽입이 불가능한 1명의 환자를 제외하고 9명의 환자에 대해 가상으로 삽입하여 선량의 변화를 조사하였다. 그 결과 Virtual 치료계획이 PTV 치료계획뿐 아니라 ICRU 치료계획에 비해 100% 등선량 용적(p=0.0608, p=0.0607) 및 PTV 이외의 정상조직에 불필요하게 조사되는 용적(p=0.0162, p=0.008)을 현저히 감소시킬 수 있는 것으로 나타났다.

  • PDF

벌크화물 수송실태 분석 (Analysis of bulk freight transportation)

  • 이석;김영주;김경태;권용장;김승모
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
    • /
    • pp.3278-3288
    • /
    • 2011
  • Bulk freight is transported by a freight car, ship and tank lorry without packaging in a state of particles or powders. In korea, the main bulk freight include oil, grain, coal, cement, iron ore and these are occupied nearly 30% of the volume of gross domestic freight transportation. Therefore it is in important to transport efficient bulk freight transport system for the improvement of national distribution competitive as raw material for industry. Generally environment-friendly transfer modes such as railway and sea transport play an important role in bulk freight transport due to the mass transfer characteristics of bulk freight. This study is carried out for examining the problem of oil, grain, coal, cement, ore transportation through analyzing distribution flow of items and understanding characters of transfer modes.

  • PDF

A Study on Efficiency for the Department of Trade in Universities

  • Park, Hyun-Chae;Kang, In-Kyu
    • 무역상무연구
    • /
    • 제52권
    • /
    • pp.97-118
    • /
    • 2011
  • 85% of South Korea's gross domestic product(GDP) depends on trade. Exports amount in 2011 exceeds $ 5,000Billion. Korea is expected to achieve $ 1 trillion in total trade volume and will become finally the ninth in the world. We do not have a lot of natural resources and are bound to export the finished products to pursue economic development. In other words, trade sector is very essential for Korea to continue economic growth. The department of trade in universities have brought up the concerned students serving for trade sectors. Currently, "half-price tuition" in universities has become very controversial issue in Korea so this paper studies the efficiency of "the Department" because the universities may reconsider the adjustment of tuition fee, if they can enhance the efficiency level. DEA model is used for the analysis. As a result, 8 DMUs like KAN1, KEI5, BAE10 etc. show relatively higher efficiency levels.

  • PDF

전기통신사업의 총요금수준 결정

  • 장석윤;이재호
    • ETRI Journal
    • /
    • 제7권4호
    • /
    • pp.15-23
    • /
    • 1985
  • 본 연구에서는 우리나라 전기통신사업의 총요금수준 결정방식을 수립하고 이의 모형화를 시도하였다. 모형의 실제적인 적용을 위해서는 전략 변수들에 대한 주요 외국의 사례와 우리나라 실례를 검토하여 중.장기방향을 제시하고 있다.

  • PDF

도로교의 중차량 통과허용하중 설정에 관한 연구 (A Study on Permit Vehicle Weight for Highway Bridges)

  • 김상효;양남석;김종학;전귀현
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 2000년도 봄 학술발표회논문집
    • /
    • pp.222-229
    • /
    • 2000
  • Malty bridges are severely damaged by the overloaded heavy vehicle and tile trend will become more serious because the traffic volume is continuously increasing. Currently, the vehicles with gross weights over 40 tons or axle weight over 10 tons are not allowed on the public road. However, this regulation is not based on a systemetic study on the bridge capacityand assumed to be much too conservative depending on the vehicle types ans bridge types. In this study, the permit weights of heavy vehicles of diverse axle spacings and axle load distribution are calculated considering the structural characteristics of bridge superstructures. In order to consider the various load effects of heavy weight vehicle crossings, three conditions are considered in the calculation of permit vehicle load. From the results, the permit vehicle weights of bridges are calculated and simplified formulas which can be used in the case when only the vehicle dimension are known are presented.

  • PDF

IDI 디젤기관의 단일영역 열발생량 계산 (One-zone heat release analysis for IDI diesel engine)

  • 이석영;김규보;최승환;전충환;장영준;전광민
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 추계학술대회논문집B
    • /
    • pp.830-836
    • /
    • 2001
  • An one-zone heat release analysis was studied for a 4 cylinder indirect diesel engine. The object of the study is to calculate the heat release accurately including the effect of specific heat ratio, heat transfer and crevice volume and to find out combustion characteristics of an indirect diesel engine cosidering the effect of both pressure in the main and swirl chambers. The integrated gross heat release values were close to the measured fuel energy at various full load operating conditions.

  • PDF

Fretting Wear Mechanisms of Zircaloy-4 and Inconel 600 Contact in Air

  • Kim, Tae-Hyung;Kim, Seock-Sam
    • Journal of Mechanical Science and Technology
    • /
    • 제15권9호
    • /
    • pp.1274-1280
    • /
    • 2001
  • The fretting wear behavior of the contact between Zircaloy-4 tube and Inconel 600, which are used as the fuel rod cladding and grid, respectively, in PWR nuclear power plants was investigated in air. In the study, number of cycles, slip amplitude and normal load were selected as the main factors of fretting wear. The results indicated that wear increased with load, slip amplitude and number of cycles but was affected mainly by the slip amplitude. SEM micrographs revealed the characteristics of fretting wear features on the surface of the specimens such as stick, partial slip and gross slip which depended on the slip amplitude. It was found that fretting wear was caused by the crack generation along the stick-slip boundaries due to the accumulation of plastic flow at small slip amplitudes and by abrasive wear in the entire contact area at high slip amplitudes.

  • PDF

Seismic shear strengthening of R/C beams and columns with expanded steel meshes

  • Morshed, Reza;Kazemi, Mohammad Taghi
    • Structural Engineering and Mechanics
    • /
    • 제21권3호
    • /
    • pp.333-350
    • /
    • 2005
  • This paper presents results of an experimental study to evaluate a new retrofit technique for strengthening shear deficient short concrete beams and columns. In this technique a mortar jacket reinforced with expanded steel meshes is used for retrofitting. Twelve short reinforced concrete specimens, including eight retrofitted ones, were tested. Six specimens were tested under a constant compressive axial force of 15% of column axial load capacity based on original concrete gross section, $A_g$, and the concrete compressive strength, ${f_c}^{\prime}$. Main variables were the spacing of ties in original specimens and the volume fraction of expanded metal in jackets. Original specimens failed before reaching their nominal calculated flexural strength, $M_n$, and had very poor ductility. Strengthened specimens reached their nominal flexural strength and had a ductility capacity factor of up to 8 for the beams and up to 5.5 for the columns. Based on the test results, it can be concluded that expanded steel meshes can be used effectively to strengthen shear deficient concrete members.