• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.6
• /
• pp.60-68
• /
• 2010

In this study, the conventional plane tip, double squealer tip, and various groove tip blades were tested in a linear cascade in order to measure the effect of the tip shapes on tip surface heat transfer coefficient distributions. Detailed heat transfer coefficient distributions were measured using a hue-detection based transient liquid crystals technique. Two tip gap clearances of 1.5% and 2.3% of blade span were investigated and the Reynolds number based on cascade exit velocity and chord length was $2.48{\times}10^5$. Results showed that the overall heat transfer coefficients on the tip surface with various grooved tips were lower than those with plane tip blade. The overall heat transfer coefficient on grooved along suction side tip was lower than that on the squealer tip.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.311-318
• /
• 2010

In this study, the conventional plane tip, double squealer tip, and various groove tip blades were tested in a linear cascade in order to measure the effect of the tip shapes on tip surface heat transfer coefficient distributions. Detailed heat transfer coefficient distributions were measured using a hue-detection based transient liquid crystals technique. Two tip gap clearances of 1.5% and 2.3% of blade span were investigated and the Reynolds number based on cascade exit velocity and chord length was $2.48{\times}10^5$. Results showed that the overall heat transfer coefficients on the tip surface with various grooved tips were lower than those with plane tip blade. The overall heat transfer coefficient on grooved along suction side tip was lower than that on the squealer tip.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.7
• /
• pp.1340-1347
• /
• 2002

Finite element simulations are being widely used to increase the efficiency and effectiveness of design of bulk metal forming processes. In such simulations, proper consideration of friction condition is crucial in obtaining reliable results. For this purpose, tip test based on backward extrusion was proposed recently. In this lest, a cylindrical billet is positioned in a shallow groove of a counter punch for centering purpose and formation of a radial tip is induced on the extruded end of the workpiece. In this study, the effect of centering groove on tip test was investigated. The quantitative ratio of the shear friction factors between the punch and die was numerically determined depending on the shape of centering groove. Also, surface expansion and pressure distribution along the punch and die were considered in order to better understand the reason that friction condition at the punch compared to the one of die was more severe.

• Journal of Welding and Joining
• /
• v.13 no.4
• /
• pp.122-131
• /
• 1995

An automatic welding equipment for thick plates requires the capability of the seam tracking of the weld line which often includes misalignment of the workpiece and variation of groove width. In this study, an automatic welding equipment and control algorithms based on the arc sensor were proposed for the GMA welding of thick plates which had misalignment and gap variation. The developed system being constituted with 5 axis can be automatically controlled by computer and also automnatically set the welding conditions such as welding current, and voltage. The proposed algorithms for the seam tracking in multi-pass welding of the thick plates were constituted as follows : the detection of weaving-end point for findng the variation of groove width, the control of welding velocity for acquiring a constant thickness deposition of weld metal, and the calculation of groove width and height of an arbitrary pass in the multi-pass weld. As results of the application of the system, it was revealed that the system had a good capability in seam tracking and made an excellent weld quality in V groove butt joint.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.387-387
• /
• 2012

결정 Si 및 비정질 Si 태양전지는 환경친화적이며 안정적인 물질로 전력변환 및 에너지 저장 장치에 중요하기 때문에 연구가 활발하게 진행되고 있다. 고효율 Si 태양전지를 제작하여 상용화하기에는 여러 가지 문제점이 있다. 공기와 비교하여 높은 굴절률을 갖고 있기 때문에 발생하는 반사를 줄이기 위해서 필요한 무반사 코팅층(Anti-reflective coating; ARC)은 주로 SiO2 와 SiNx 와 같은 유전체를 이용하여 사용하지만 이들 ARC 증착은 PECVD와 같은 진공장비를 사용하므로 제작 비용이 높아지는 단점이 있다. 나노선 또는 나노 팁과 같은 sub-wavelength 구조를 표면에 만들어 반사율을 줄이는 작업을 통해 ARC 공정비용을 감소하고 효율을 증진하는 연구가 활발히 진행되고 있다. CdS 양자점을 태양전지 표면에 형성함으로 ARC로 해결할 수 없는 단파장영역에 해당하는 부분을 줄이는 연구가 진행되었으며, 비정질의 경우 원기둥 형태의 태양전지 형태와 더불어 지름 방향으로의 PN 접합 나노로드 배열을 만들어 흡수면을 증가하여 효율을 증가한 연구도 진행되었다. 태양전지 표면의 형태를 V-groove 형태로 형성하여 입사하는 태양전지의 광밀도를 증가하는 이론적 결과도 발표되었다. 본 연구에서는 Si 태양전지의 표면변형에 따른 태양전지의 전력변환효율의 변화를 관찰하기 위하여 태양전지 표면의 texture 지름을 $3{\sim}15{\mu}m$, 간격을 $5{\sim}20{\mu}m$로 변화하고, 태양전지 표면의 나노 패턴을 2~10 nm 로 변화하여 반사율과 전력변환효율을 비교하였다. 나노와 마이크로 패턴은 각각 polystyrene nanosphere 와 photo mask를 이용하여 제작하였으며 PN junction Si 태양전지는 spin on dopant 방식으로 제작하여 성능을 조사하였다.