• Steel and Composite Structures
• /
• v.33 no.3
• /
• pp.433-444
• /
• 2019

Fatigue failure of a grid structure using bolt-sphere joints is liable to occur in a high-strength bolt due to the alternating and reciprocal actions of a suspension crane. In this study, variable amplitude fatigue tests were carried out on 20 40 Cr steel alloy M30 high-strength bolts using an MTS fatigue testing machine, and four cyclic stress amplitude loading patterns, Low-High, High-Low, Low-High-Low, and High-Low-High, were tested. The scanning electron microscope images of bolt fatigue failure due to variable amplitude stress were obtained, and the fractographic analysis of fatigue fractures was performed to investigate the fatigue failure mechanisms. Based on the available data from the constant amplitude fatigue tests, the variable amplitude fatigue life of an M30 high-strength bolt in a bolt-sphere joint was estimated using both Miner's rule and the Corten-Dolan model. Since both cumulative damage models gave similar predictions, Miner's rule is suggested for estimating the variable-amplitude fatigue life of M30 high-strength bolts in a grid structure with bolt-sphere joints; the S-N fatigue curve of the M30 high-strength bolts under variable amplitude loading was derived using equivalent stress amplitude as a design parameter.

• Steel and Composite Structures
• /
• v.25 no.5
• /
• pp.571-579
• /
• 2017

The grid structure with bolt-sphere joints is widely adopted by industrial plants with suspending crane. The alternating reciprocating action of the suspending crane will cause fatigue problems of the grid structure with bolt-sphere joints with respect to the rod, the cone, the sealing plate, the bolt ball and the high strength bolt; while the fatigue of the high strength bolt is the key issue of fatigue failure. Based on efficient and smooth loading equipment with the AMSLER fatigue testing machine, this paper conducted a constant amplitude fatigue test on 18 M20 and 14 M30 high strength bolts with 40Cr material, and obtained 19 valid failure points, 9 unspoiled points with more than 2 million cycles, and 4 abnormal failure points. In addition, it established the constant amplitude fatigue design method, ${[{\Delta}{\sigma}]_{{2{\times}10}}{^6=58.91MPa}$, and analyzed the stress concentration and the fatigue fracture of high strength bolts. It can be explained that the geometrical stress concentration of high-strength bolt caused by spiral burr is severe.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.4
• /
• pp.214-224
• /
• 2012

The objective of this paper is to design multichannel spherical loudspeaker array by considering various positioning methods such as Gaussian grid, Lebedev grid and packing method. For the spatial sound manipulation, which is to make desired sound field by controling multiple sound sources, the Kirchhoff- Helmholtz integral states that sound fields can be reproduced in terms of infinite control sources on the integral surface. But since we cannot control infinite number of sources for the implementation, we have to allocate finite number of sound sources which can approximately act as infinite number of sources. To manipulate sound field inside of a sphere (which is typical example of three dimensional array) by controlling sound sources on the surface, three methods of allocating sound sources, which are Gaussian grid, Lebedev grid and packing method, are reviewed. For each geometry, the performances of manipulation rendered by time-reversal operator and higher-order ambisonics are compared.

• Korean Journal of Computational Design and Engineering
• /
• v.10 no.3
• /
• pp.168-178
• /
• 2005

The Delaunay triangular net is primarily characterized by a balance of the whole by improving divided triangular patches into a regular triangle, which closely resembles an equiangular triangle. A triangular net occurring in certain, point-clustered, data is unique and can always create the same triangular net. Due to such unique characteristics, Delaunay triangulation is used in various fields., such as shape reconstruction, solid modeling and volume rendering. There are many algorithms available for Delaunay triangulation but, efficient sequential algorithms are rare. When these grids involve a set of points whose distribution are not well proportioned, the execution speed becomes slower than in a well-proportioned grid. In order to make up for this weakness, the ids are divided into sub-grids when the sets are integrated inside the grid. A method for finding a mate in an incremental construction algorithm is to first search the area with a higher possibility of forming a regular triangular net, while the existing method is to find a set of points inside the grid that includes the circumscribed sphere, increasing the radius of the circumscribed sphere to a certain extent. Therefore, due to its more efficient searching performance, it takes a shorer time to form a triangular net than general incremental algorithms.

• 한국전산유체공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.35-40
• /
• 2005

Up to recently, with the improvement of a computer power and high speed of network technology, advanced countries have researched a construction of the e-Science environment. As a major application part, a construction for environment of CFD, also, have studied together. During the research, people realize that not sharing hardware but also appropriate software development is really important to realize the environment. This paper describes about a construction of a collaborative research environment in the KISTI: Clients can connect to the computing resources through the web portal, run the Cactus simulation.: According to the computing resources, the simulation can migrate to some site to find better computing power.: Result of the calculation visualize at the web portal directly so that researchers of remote site can be share and analyze the result collaborative ways.

• Journal of computational fluids engineering
• /
• v.3 no.2
• /
• pp.17-26
• /
• 1998

The three-dimensional incompressible Navier-Stokes equations have been solved by a node-centered finite volume method with unstructured hybrid grids. The pressure-velocity coupling is handled by the artificial compressibility algorithm and convective fluxes are obtained by Roe's flux difference splitting scheme with linear reconstruction of the solutions. Euler implicit method with Jacobi matrix solver is used for the time-integration. The viscous terms are discretised in a manner to handle any kind of grids such as tetragedra, prisms, pyramids, hexahedra, or mixed-element grid. Inviscid bump flow is solved to check the accuracy of high order convective flux discretisation. And viscous flows around a circular cylinder and a sphere are studied to show the efficiency and accuracy of the solver.

• 한국전산유체공학회:학술대회논문집
• /
• 2007.04a
• /
• pp.41-44
• /
• 2007

A large eddy simulation method with unstructured mesh is presented. Two explicit filtering procedures are adopted for reducing the aliasing error of the nonlinear convective term and measuring the level of subgrid scale velocity fluctuation, respectively. The developed subgrid scale model is basically an eddy viscosity model which depends on both local velocity fluctuation level and local grid scale. As a validation problem, the flows around a sphere of several Reynolds numbers are simulated and some characteristic quantities are compared to experimental data and numerical results in the literature.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.12
• /
• pp.859-866
• /
• 2006

Grid portal services provide more flexible research environment by overcoming time and space limit of existing application-based grid services. However user's requirements such as user interfaces are not clear during development cycle and changed frequently. Therefore it is necessary to reduce the cost for creating and maintaining user interfaces of grid services. In this paper, we suggest an object-oriented user control model which allows easier development of user interfaces and increases code reusability by abstracting objects from presentation layer of web. In this model, structure of presentation pages can be described more clearly and implementation of actions is simple and easy.

• Journal of the Society of Naval Architects of Korea
• /
• v.41 no.2
• /
• pp.90-97
• /
• 2004

Flow mechanism of contractive and dilative motion is numerically investigated to obtain a propulsive force in highly viscous fluid. An axisymmetric code is developed with unstructured grid system based on cell-centered scheme. It is validated by comparing with the results of Stokes approximation for the problem of uniform flow past a sphere in low Reynolds number(R$_{n}$=1). The validated code is applied to the simulation of contractive and dilative periodic motion of body whose results are quantitatively compared with the two dimensional case. In order to investigate the grid dependency, two different grids are applied to the present computations. The present study provides key information for the development of an axisymmetric Micro-hydro-robot.t.

• Journal of Korea Multimedia Society
• /
• v.19 no.8
• /
• pp.1395-1403
• /
• 2016

In recent years, researches of security threats reported that various types of social engineering attack were frequently observed. In this paper, we propose secure keypad scheme for mobile devices. In our scheme, every edge of keypad is linked each other, and it looks like a sphere. With this keypad, users input their password using pre-selected grid pointer. Because of circulation of the keypad layout, even though the attacker snatch the user password typing motion through the human eyes or motion capture devices, attacker do not estimate the original password. Moreover, without the information of grid pointer position, the attacker do not acquire original password. Therefore, our scheme is resistant to password guessing attack.