• 한국전자통신학회논문지
• /
• 제10권2호
• /
• pp.275-282
• /
• 2015

NAND 플래쉬메모리는 전원이 꺼져도 데이터를 유지할 수 있고 저비용, 고용량의 특징을 가지기 때문에 휴대용 기기에서 많이 활용되고 있다. 플래쉬메모리에서 대용량의 데이터를 효과적으로 처리하기 위하여 색인을 필수적으로 사용해야 한다. 그러나 플래쉬메모리는 쓰기 연산의 비용이 크고 덮어쓰기 연산을 지원하지 않기 때문에 기존의 디스크기반 색인을 사용하면 성능이 저하되는 문제가 발생할 수 있다. 본 논문에서는 플래쉬메모리에서 고정그리드화일 색인을 구현하고 다양한 조건에서 성능 평가를 수행한다. 이를 위하여 질의연산과 변경 연산의 비율에 따른 평균 수행 시간을 측정한다. 그리고 디스크에서의 수행 시간과 비교한다.

• 전기학회논문지
• /
• 제62권1호
• /
• pp.21-28
• /
• 2013

The paper proposes an optimal sizing method of a customer's battery energy storage system (BESS) which aims at managing the electricity demand of the customer to minimize electricity cost under the time of use(TOU) pricing. Peak load limit of the customer and charging and discharging schedules of the BESS are optimized on annual basis to minimize annual electricity cost, which consists of peak load related basic cost and actual usage cost. The optimal scheduling is used to assess the maximum cost savings for all sets of candidate capacities of BESS. An optimal size of BESS is determined from the cost saving curves via capacity of BESS. Case study uses real data from an apartment-type factory customer and shows how the proposed method can be employed to optimally design the size of BESS for customer demand management.

• Journal of Power Electronics
• /
• 제13권3호
• /
• pp.390-399
• /
• 2013

As a result of the depletion of fossil fuels and environmental contamination, it has become important to use renewable energy. For the stable utilization of renewable energy sources, energy storage devices must be used. In addition, renewable and distributed power sources with energy storage devices must operate stably under grid-connected mode. This paper proposed dynamic response modeling for renewable power generation systems including a charger/discharger with an energy storage device in order to derive a method to guarantee stable operation while fully utilizing the energy from the energy storage device. In this paper, the principle operation and design guidelines of the proposed scheme are presented, along with a performance analysis and simulation results using MATLAB and PSIM. Finally, a hardware prototype of a 1kW power conditioning system with an energy storage device has been implemented for experimental verification of the proposed converter system.

• Journal of Electrical Engineering and Technology
• /
• 제13권3호
• /
• pp.1212-1222
• /
• 2018

This paper presents a model predictive control (MPC) method to reduce the common-mode voltage (CMV) for inverters connected in parallel, which increase the capacity of energy storage systems (ESSs). The proposed method is based on subdivided voltage vectors, and the resulting algorithm can be applied to control the inverters. Furthermore, we use more voltage vectors than the conventional MPC algorithm; consequently, the quality of grid currents is improved. Several methods were proposed in order to reduce the CMV appearing during operation and its adverse effects. However, those methods have shown to increase the total harmonic distortion of the grid currents. Our method, however, aims to both avoid this drawback and effectively reduce the CMV. By employing phase difference in the carrier signals to control each inverter, we successfully reduced the CMV for inverters connected in parallel, thus outperforming similar methods. In fact, the validity of the proposed method was verified by simulations and experimental results.

• 한국태양에너지학회 논문집
• /
• 제39권4호
• /
• pp.69-77
• /
• 2019

Among the main functions of the grid-connected photovoltaic (PV) system, the anti-islanding operation function is a very important problem. Recently, due to the improvement in power generation efficiency and the maintenance advantages in PV system, the use of string inverter has increased so that the possibility of islanding operation has been raised. Generally, when a power system faults, the PV inverter must be disconnected from power system within 10 cycles by the anti-islanding operation function. However, in the real-time of power system, the output power of the PV system within 10cycles is effected. In this paper, we analyzed the effect of grid-connected PV system on power quality in a short time within 10 cycles on fault case of power system using the Matlab Simulink program.

• KEPCO Journal on Electric Power and Energy
• /
• 제7권2호
• /
• pp.249-254
• /
• 2021

As the spreading speed of electric vehicles increases rapidly, those are expected to be able to use them as flexible resources in the power system beyond the concern for the supply of its charging power. Especially when the Renewable Energy sources (RES) which have no intrinsic control capability have replaced the synchronous generators more and more, the power system needs to secure the additional frequency control resources to ensure its stability. However, the feasibility of using electric vehicles as the frequency control resources should be analyzed from the perspective of the power system operation and it requires the existing simulation frameworks for the power system. Therefore, this paper proposes the grid connected modeling of the primary frequency control provided by electric vehicles which can be integrated into the existing power system model. In addition, the proposed model is implemented considering technical performances constrained by the characteristics of the Vehicle-Grid Integration (VGI) system so that the simulation results can be accepted by the power utilities operating the power system conservatively.

• Wind and Structures
• /
• 제34권1호
• /
• pp.151-159
• /
• 2022

The aerodynamics of blunt bodies with separation at the sharp corner of the leading edge and reattachment on the body side are particularly important in civil engineering applications. In recent years, a number of experimental and numerical studies have become available on the aerodynamics of a rectangular cylinder with chord-to-thickness ratio equal to 5 (BARC). Despite the interest in the topic, a widely accepted set of guidelines for grid generation about these blunt bodies is still missing. In this work a new, well resolved Direct Numerical Simulation (DNS) around the BARC body at Re=3000 is presented and its results compared to previous DNSs of the same case but with different numerical approaches and mesh. Despite the simulations use different numerical approaches, mesh and domain dimensions, the main discrepancies are ascribed to the different grid spacings employed. While a more rigorous analysis is envisaged, where the order of accuracy of the schemes are kept the same while grid spacings are varied alternately along each spatial direction, this represents a first attempt in the study of the influence of spatial resolution in the Direct Numerical Simulation of flows around elongated rectangular cylinders with sharp corners.

• 한국산학기술학회논문지
• /
• 제11권12호
• /
• pp.5042-5048
• /
• 2010

유비쿼터스 환경에서 다양한 센서로부터 생성되는 데이터 스트림에 대해 사용자가 요구하는 위치 기반 서비스를 효과적으로 지원하기 위해 연산자 네트워크와 공유 등을 통한 연속 질의 처리 기법이 활용되고 있다. 위치 정보 기반의 연속 질의 처리는 특정 영역을 중심으로 유사 질의가 집중적으로 발생할 수 있으므로, 본 논문에서는 유사한 조건을 갖는 공간 연산을 공유하기 위해 그리드 영역 분할을 이용한 공간 연산 공유 기법을 제안한다. 제안기법은 공간 연산을 직접 공유하지 않고 그리드 셀 별로 이동객체를 공유하기 때문에 유사한 조건을 갖는 공간 연산의 공유가 가능하여 공간 연산의 실행 빈도수를 크게 감소시켜 질의 처리 속도의 향상과 함께 메모리 이용률을 향상시킨다.

• 대한수의학회지
• /
• 제60권3호
• /
• pp.123-131
• /
• 2020

Portable blood glucose meters (PBGMs) are widely used because of their practicality. However, the accuracy of PBGMs has frequently been questioned. The objectives of this study were to evaluate factors that might interfere with measurements made using PBGMs, and to assess the clinical utility of 6 PBGMs. The glucose concentrations measured using the PBGMs were compared with those obtained using a reference method. The agreement between the measured values was assessed using Spearman correlation analysis, Passing-Bablok regression analysis, Bland-Altman plots, and consensus error grid analysis. Mann-Whitney and Kruskal-Wallis tests were performed to identify the parameters affecting glucose measurement. The results indicated that all of the PBGMs tested perform adequately for use in veterinary practice. In most cases, measurements made using PBGM corresponded well with the blood glucose values obtained using the reference method. Error grid analysis revealed that most of the PBGM values fell within zones A and B. However, some measurements of blood glucose concentrations < 80 mg/dL fell into zone C. PCV, and triglyceride and total protein concentration, significantly affected the output of some of the PBGMs. Therefore, clinicians should be aware of the characteristics of the PBGM that they use.

• 한국통신학회논문지
• /
• 제42권4호
• /
• pp.791-797
• /
• 2017

최근 에너지 사용량이 증가하면서 전력기술과 ICT 등을 활용한 효율적 에너지 관리에 관한 관심이 많아지고 있으며, 이와 관련된 기술들에 대한 연구가 활발히 이루어지고 있다. 특히 통합형 전력 관리 네트워크 모델에 관한 연구 및 사업화가 가장 주목 받고 있다. 본 논문에서는 에너지 사용 및 관리를 위한 기술들에 관한 현황 및 특징 등을 살펴본다.