• Journal of the Korea Society for Simulation
• /
• v.15 no.4
• /
• pp.107-117
• /
• 2006

Wireless Sensor Network consists of sensor nodes and sink. A sink receives and processes signals created from sensor nodes. Many studies have been performed, since sensor network allows multiple nodes to run using a limited amount of energy, Most researches have focused on using fixed sink. However, in many cases, the sink has mobility effected by man, cars, and etc. This research proposes three methods for reducing the node's energy consumption which is applied the Grid method based on mobile sink. Most routing processes handled by the mobile sink and wireless sensor area is separated and operated respectively. So, this research allows decreasing the power costs. In addition, it also proposes methods using simulation to test the quality of the performance.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.2
• /
• pp.216-220
• /
• 2008

Sensor nodes in wireless network have several limitations such as lack of energy resource and network bandwidth. There are many researches to extend lifetime of sensor network and enhance availability. However, most of the previous researches didn't consider the mobile sink node. Those researches aren't suitable in the environment having mobile sinks. In this paper. we propose a scheme that reduces communication overheads and energy consumptions and improves reliability in routing path setup. Proposed scheme has excellent scalability without degrading performance in environment where many sink nodes exist and/or the network size is huge. Proposed scheme saves the energy consumption up to 70% in comparison with the previous grid-based and cluster-based protocol. As a result, proposed scheme increases the lifetime of sensor network and enhances availability of wireless sensor network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.8A
• /
• pp.679-687
• /
• 2005

A mobile ad-hoc network (MANET) is one consisting of a set of mobile hosts capable of communicating with each other without the assistance of base stations. It is necessary to use bandwidth effectively because MANET has limited bandwidth. In this paper, we propose SMGS (source based multiple gateway selection routing protocol). In SMGS, each node estimates its expected life time (ELT) and if its ELT is larger than that of current gateway it becomes a candidate node. When a source node establishes a path, in each grid the candidate node will take the route request and be a gateway node for the each source node. The node that is expected to stay the longest time in the grid is selected so that we can reduce frequent gateway handoff, packet loss, and handoff delay.

• Journal of Korea Water Resources Association
• /
• v.33 no.1
• /
• pp.61-72
• /
• 2000

The purpose of this study is to improve the method of evaluating groundwater recharge by using grid-based soil moisture routing technique. A model which predicts temporal variation and spatial distribution of soil moisture on a daily time step was developed. The model uses ASCII-formatted map data supported by the irregular gridded map of the GRASS(Geographic Resources Analysis Support System)-GIS and can generate daily and monthly spatial distribution map of surface runoff, soil moisture content, evapotranspiration within the watershed. The model was applied to Ipyunggyo watershed($75.6\;\textrm{km}^2$) located in the upstream of Bocheongchun watershed. Seven maps; DEM(Digital Elevation Mode]), stream, flow path, soil, land use, Thiessen network and free groundwater level, were used for input data. Predicted streamflows resulting from two years (l995, 1996) daily data were compared with the observed values at the watershed outlet. The results of temporal variations and spatial distributions of soil moisture are presented by using GRASS GIS. As a final result, the monthly predicted groundwater recharge was presented.sented.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.1C
• /
• pp.45-53
• /
• 2012

In this paper, we proposed the efficient addressing scheme for improving the performance of routing algorithm by using ZigBee in Smart Grid environment. A distributed address allocation scheme used an existing algorithm that has wasted in address space. Therefore proposing x, y and z coordinate axes from divided address space of 16 bit to solve this problems. Each node was reduced not only bitwise but also multi hop using the coordinate axes while routing than $Cskip$ algorithm. I compared the performance between the standard and the proposed mechanism through the numerical analysis. Simulation verified performance about decrease averaging multi hop count that compare proposing algorithm and another. The numerical analysis results show that proposed algorithm reduced the multi hop better than ZigBee distributed address assignmen.

• Journal of Satellite, Information and Communications
• /
• v.9 no.2
• /
• pp.18-22
• /
• 2014

Satellite communications consist of communications between base stations of the ground and satellites. For efficient satellite communications, ground networks should be organically utilized. Grid networks are frequently used in and outside the country for wireless communications. The performance of wireless communications is determined by mobility, topography, and jamming signals. Therefore, continuous studies of grid networks are necessary for the utilization of next period satellite networks. Since military communications are used based on wireless systems, they can be considered as a sample of utilization of grid networks. Therefore, this paper presented the results of simulations conducted for the improvement of the performance of the grid networks used in military communications that employing the OSPF, a popular routing protocol for military applications. First we investigate the effects of changing the bit error rate (BER) and number of routers. Then we discuss the effects of maximum segment size (MSS) on network behavior and stability. In this way, we can determine the appropriate MSS for a grid network under various values of BER and number of routers. Such results can be also applied to commercial grid network evaluations.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.3
• /
• pp.440-448
• /
• 2021

This paper presents problems of network technology in smart grid and implements a blockchain-based LoRa multi-hop network to solve them. Since some smart grid applications are operated in harsh environments, it is difficult to establish communication infrastructure. We propose a LoRa network with multi-hop using the Flooding routing protocol. Smart grid environment composes an independent network using various power grid protocols depending on the application. Since this has a problem that an independent infrastructure must be established for each network, a single gateway device supports multiple power grid protocols to implement a method for network integration. Lastly, the author applied Hyperledger-based blockchain to the LoRa network to ensure the integrity of data in a smart grid environment, and strengthened security by physically distributing it. After constructing the three suggestions on the actual test bed, we confirmed that the network operates normally through experiments.

• International Union of Geodesy and Geophysics Korean Journal of Geophysical Research
• /
• v.26 no.1
• /
• pp.1-14
• /
• 1998

Various numerical methods for the two dimensional shallow water equations have been applied to the problems of flood routing, tidal circulation, storm surges, and atmospheric circulation. These methods are often based on the Alternating Direction Implicity(ADI) method. However, the ADI method results in inaccuracies for large time steps when dealing with a complex geometry or bathymetry. Since this method reduces the performance considerably, a fully implicit method developed by Wilders et al. (1998) is used to improve the accuracy for a large time step. Finite Difference Methods are defined on a rectangular grid. Two drawbacks of this type of grid are that grid refinement is not possibile locally and that the physical boundary is sometimes poorly represented by the numerical model boundary. Because of the second deficiency several purely numerical boundary effects can be involved. A boundary fitted curvilinear coordinate transformation is used to reduce these difficulties. It the curvilinear coordinate transformation is used to reduce these difficulties. If the coordinate transformation is orthogonal then the transformed shallow water equations are similar to the original equations. Therefore, an orthogonal coorinate transformation is used for defining coordinate system. A multigrid (MG) method is widely used to accelerate the convergence in the numerical methods. In this study, a technique using a MG method is proposed to reduce the computing time and to improve the accuracy for the orthogonal to reduce the computing time and to improve the accuracy for the orthogonal grid generation and the solutions of the shallow water equations.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.8
• /
• pp.1-10
• /
• 1995

We have analyzed the reliability of failure models in circuit-switched networks. These models are grid topology circuit-switched networks, and each node transmits a packet to a destination node using a Flooding routing method. We have assumed that the failure of each link and node is independent. We have considered two method to analyze reliability in these models : The Karnaugh Map method and joint probability method. In this two method, we have analyzed the reliability in a small grid topology circuit switched network by a joint probability method, and comared analytic results with simulated ones. For a large grid enormous. So, we have evaluated the reliability of the network by computer simulation techniques. As results, we have found that the analytic results are very close to simulated ones in a small grid topology circuit switched network. And, we have found that network reliability decreases exponentially, according to increment of link or node failure, and network reliability is almost linearly decreased according to increment of the number of links, by which call has passed. Finally, we have found an interesting result that nodes in a center of the network are superior to the other nodes from the reliability point of view.

• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.11
• /
• pp.385-392
• /
• 2016

Recently, Expectation Area-based Real-time Routing (EAR2) protocol has been proposed to support real-time routing in wireless sensor networks. EAR2 considers the expectation area of a mobile sink and uses flooding within the expectation area. However, flooding leads to excessive energy consumption and causes long delay against real-time routing. Moreover, since EAR2 uses single path to the expectation area, it is difficult to support reliable routing in sensor networks with high link failures. Thus, to overcome these limitation of EAR2, this paper proposes a reliable and real-time routing protocol based on virtual grids and multipath for mobile sinks. To support real-time routing, the proposed protocol considers expectation grids belonged to the expectation area. Instead of flooding within the expectation area, the proposed protocol uses multicasting to the expectation grids and single hop forwarding in an expectation grid because the multicasting can save much energy and the single hop forwarding can provide short delay. Also, the proposed protocol uses multipath to the expectation grids to deal with link failures for supporting reliable routing. Simulation results show that the proposed protocol is superior to the existing protocols.