• Journal of Korea Water Resources Association
• /
• v.42 no.9
• /
• pp.703-713
• /
• 2009

Dam has very important roles in both water use and flood control. Dam release and runoff from rainfall affect directly to the flood control at the downstream of dam during heavy storm especially. This study evaluates the applicability of a distributed model by applying the GRM (Grid based Rainfall-runoff Model) based on HyGIS (Hydro Geographic Information System) environment to runoff modeling at the downstream of dam where the discharge from dam and rainfall affect simultaneously. In order to do this, Yeoju watershed in Han River basin is selected. Rainfall data and discharge from Chungju regulation dam and Hoengseong dam are applied to runoff simulation. The modeling results are verified with Yeoju water level station, and they show good agreement with observed hydrographs. And this study shows that GRM is able to simulate appropriately the effect of dam discharge and rainfall on watershed runoff.

• KEPCO Journal on Electric Power and Energy
• /
• v.5 no.3
• /
• pp.209-213
• /
• 2019

Recently, demand for high energy density and long cycling stability of energy storage system has increased for application using with frequency regulation (F/R) in power grid. Supercapacitor have long lifetime and high charge and discharge rate, it is very adaptable to apply a frequency regulation in power grid. Supercapacitor can complement batteries to reduce the size and installation of batteries. Because their utilization in a system can potentially eliminate the need for short-term frequent replacement as required by batteries, hence, saving the resources invested in the upkeep of the whole system or extension of lifecycle of batteries in the long run of power grid. However, low energy density in supercapacitor is critical weakness to utilization for huge energy storage system of power grid. So, it is still far from being able to replace batteries and struggle in meeting the demand for a high energy density. But, today, LIC (Lithium Ion Capacitor) considered as an attractive structure to improve energy density much more than EDLC (Electric double layer capacitor) because LIC has high voltage range up to 3.8 V. But, many aspects of the electrochemical performance of LIC still need to be examined closely in order to apply for commercial use. In this study, in order to improve the capacitance of LIC related with energy density, we designed new method of pre-doping in anode electrode. The electrode in cathode were fabricated in dry room which has a relative humidity under 0.1% and constant electrode thickness over $100{\mu}m$ was manufactured for stable mechanical strength and anode doping. To minimize of contact resistance, fabricated electrode was conducted hot compression process from room temperature to $65^{\circ}C$. We designed various pre-doping method for LIC structure and analyzing the doping mechanism issues. Finally, we suggest new pre-doping method to improve the capacitance and electrochemical stability for LIC.

• Journal of Life Science
• /
• v.28 no.4
• /
• pp.408-414
• /
• 2018

Actein is the well-known active ingredient of Cimicifugae rhizoma (Black cohosh). In this study, we investigated and compared the binding affinity of tubocurarine, actein, and actein derivatives on the B&C domain of the acetylcholine binding protein through in silico computational docking studies. The three-dimensional crystallographic structure of the acetylcholine binding protein B&C domain was obtained from the PDB database (PDB ID: 2XYT). An in silico computational autodocking analysis was performed using PyRx, Autodock Vina, Discovery Studio Version 4.5, and NX-QuickPharm based on scoring functions. The actein showed an optimum binding affinity (docking energy), with the acetylcholine binding protein at -10.50 kcal/mol as compared to the tubocurarine (-9.80 kcal/mol). The interacting amino acids tryptophan 84 and tryptophan 147, in the B domain of the acetylcholine binding protein active site, significantly interacted with the actein and 27-deoxyactein, and (26R)-actein. The centroid XYZ grid position of the tubocurarine was X=38.300689, Y=112.053467, and Z=51.991022, but the actein and its derivatives showed values around X=26.4, Y=127.3, Z=43.7. These results clearly indicated that actein and its derivatives could be a more potent antagonist to the acetylcholine binding protein than tubocurarine. Therefore, the extract of Cimicifugae rhizoma or actein containing biomaterials can substitute for the botulinum toxin-mediated acetylcholine receptor regulation, and be applied to the anti-wrinkle cosmetics industry.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.8
• /
• pp.773-782
• /
• 2016

Recently, Energy Industry is in the face of such sustained Low-Growth, Energy Depletion, Climate Warming and Energy Companies bankruptcy, Various methods have been tried to break through it. In this paper, We propose Business Model of Energy New Industry in Electric Power Market after analyze background of Energy New Industry and Technology Trends. The proposed Business Model introduces Energy of Things(: EoT) Service based Advanced Metering Infrastructure, Energy Storage System(: ESS) for Frequency Regulation, Energy Prosumer using Vehicle and Grid(: VnG) and Smart City.

• Journal of Power Electronics
• /
• v.16 no.4
• /
• pp.1494-1503
• /
• 2016

Power quality promotion has received increasing attention because of the wide use of semiconductor devices in recent decades. Reactive power regulation is crucial to ensuring the stable operation of power systems. In this study, a continuous reactive power controller, which is referred to as a parallel-connected magnetic energy recovery switch (MERS), is developed to regulate voltage or power factor in power grids. First, the operating principle is introduced, and a mathematical model is built. Second, a new control method for restraining current harmonics and the peak voltages of capacitors is presented. Using the proposed method, the MERS shows a wide range in terms of reactive power compensation. Finally, the performance of the proposed controller is demonstrated through computer simulations and experiments. Unlike STATCOMs, the proposed controller entails low losses, adopts a small dc capacitor, and offers ease of use.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.3
• /
• pp.531-538
• /
• 2009

The paper deals with an operation scheme to improve the forecasting of output range and to regulate the active power output of the hybrid system consisting of a doubly fed induction generator (DFIG) and a fuel-cell. The power output of the wind turbine fluctuates as the wind speed varies and the slip power between the rotor circuit and power converter varies as the rotor speed change. The power fluctuation of a DFIG makes its operation difficult when a DFIG is connected to grid. A fuel cell system can be individually operated and adjusted output power, hence the wind turbine and fuel cell hybrid system can overcome power fluctuation by using a fuel-cell power control. In this paper, a fuel-cell is performed to regulate the active power output in comparison with the regulated active power output of a DFIG. And it also improves the forecasting of output range. Based on PSCAD/EMTDC tools, a DFIG and a proton exchange membrane fuel cell(PEMFC) is simulated and the dynamics of the output power in hybrid system are investigated.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2307-2309
• /
• 2004

This paper presents a modeling and simulation of a fuzzy controller for maximum power extraction of a grid-connected wind energy conversion system with a link of a rectifier and an inverter. It discusses the maximum power control algorithm for a wind turbine and proposes, in a graphical form, the relationships of wind turbine output, rotor speed, power coefficient, tip-speed ratio with wind speed when the wind turbine is operated under the maximum power control. The control objective is to always extract maximum power from wind and transfer the power to the utility by controlling both the pitch angle of the wind turbine blades and the inverter firing angle. Pitch control method is mechanically complicated, but the control performance is better than that of the stall regulation method. The simulation results performed on MATLAB will show the variation of generator's rotor angle and rotor speed, pitch angle, and generator output.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.2
• /
• pp.232-239
• /
• 2015

Faced with unbalanced grid operation mode, the high voltage direct current (HVDC) based on voltage source converter (VSC) can be properly controlled by a dual current control scheme. For the modular multilevel converter (MMC) controlling the AC side current is able to limit the arm current which flows along the IGBT of submodule (SM) to rated current. However the limitation of the arm current results in leaving the control range of active power at MMC confined to below the rated capacity. As a result, limiting the arm current causes the problem that the DC side voltage of the HVDC can not be controlled to the reference value since MMC HVDC adjusts the DC side voltage through the active power. In this paper, we propose the algorithm adjusting the active powers of both MMCs to resolve the problem. The back-to-back MMC HVDC applying the algorithm is modeled by PSCAD/EMTDC to verify the algorithm.

• Journal of the Korean Society of Safety
• /
• v.32 no.5
• /
• pp.103-114
• /
• 2017

The landslide disaster damage has been increased by mountain development, leading to construction of educational facilities, medical facilities, petty industrial facilities, and large housing complexes. Therefore, effective regulation is required as an effort in urban planning solutions. For suggesting specific mitigation strategies on urban landslide, this study aims to define evaluation criteria for urban planning management of debris-flow disaster. AHP (Analytic Hierarchy Process), one of the multiple criterion decision making methods, was utilized in this study. This study makes use of 16 sub-criteria under the framework of hazard, exposure, and vulnerability, and well-planned expert survey measures their weights. The weights are also applied to evaluate each grid in urban space (min $10{\times}10m$) and classify it with red, orange, yellow, or green grade so that areas at higher risk are clearly identified. This study concludes that the suggested method is useful to support a strategies for urban planning management of debris-flow disaster, particularly in a GIS base.

• Proceedings of the KIEE Conference
• /
• 2002.11b
• /
• pp.65-68
• /
• 2002

Distributed Generators (DG) are rapidly increasing and most of them are interconnected with distribution network to supply power into the network. Therefore, DG may make significant impacts on distribution system operation. protection, and control with respect to the voltage regulation, voltage flicker, harmonics, fault current levels, the losses of the network, etc. These impacts would be demerits for both of DG and distribution networks. And the operation of DG may be influenced by the abnormal grid condition such as disturbances occurred in the neighboring distribution feeders as well as the feeder directly connected with DG. This paper describes the influence of fault occurred in the interconnected power network on the DG operation and the impact of DG on the network load during the interruptions of utility power.