• Journal of Electrical Engineering and Technology
• /
• 제9권3호
• /
• pp.1112-1118
• /
• 2014

In island and backcountry areas, electrical power is usually supplied by diesel generators. It is difficult for small scale diesel generators to have an economy of scale owing to the usage of fossil fuels to produce electricity. Also, there is a problem of carbon dioxide emissions that brings some environmental pollution to the entire region of the area. For solving those, this paper proposes a design method of autonomous micro-grid to minimize the fossil fuels of diesel generator, which is composed of diesel generator, wind turbine, battery energy storage system and photovoltaic generation system. The proposed method was verified through computer simulation and micro-grid operation system.

• 한국생산제조학회지
• /
• 제7권4호
• /
• pp.14-20
• /
• 1998

This paper describes a computer-aided die design system of progressive die for making CPT grid. An approach to the development of the automatic design system is based on knowledge-based rules. The developed system is designed by considering several factors, such as grid geometry and punch profile. Grid, a key component of electronic gun, is formed through a sequence of many operations, among which the pilot piercing, beading, notching, bending, swaging and slotting etc. Using the developed system, design parameters are determined and output is generated in graphic forms. Therefore the developed system provides part drawing and the assembly drawing of die set.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.378-381
• /
• 2003

Efficient development of method on a performance evaluation for machine tools has been regarded as the most important work for accuracy and quality enhancement to every user and manufacturer. A evaluation method of accuracy for machine tools has been studied recently according to the rapid increase of interest in precision machine tools. To this point of view, the circular interpolation test of machine tools is recognized as the most useful method to distinguish a dynamic accuracy of NC machine tools by ISO and ANSI/ASME, etc. In this paper, we have studied and developed the form measurement system with grid encoder to analyse the final accuracy of NC machine tools. we have analyzed the servo system error and geometric error of NC machine tools through measuring a dynamic error signal by this system. and then we verified the experimental result and enhanced the reliability by means of comparing the characteristics of the developed system with the kinematic ball-bar system.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권6호
• /
• pp.294-302
• /
• 2005

PV system's islanding occurs when the uitilty grid is removed but local sources continue to operate and provide power to local loads. Islanding is one of the serious problems in an electric power system connected with dispersed power sources. Also, this can present safety hazards and the possibility of damage to other electric equipments. If the real and reactive power of RLC load and PV system are closely matched, islanding detection by passive methods becomes difficult. This paper shows the simulation and comparision for the previous active methods and novel islanding detection method using frequency drift is proposed for grid-connected PV system.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 추계학술대회
• /
• pp.359-360
• /
• 2010

In smart grid system which uses photovoltaic system, fuel cells and so on, a program implemented with C language is used for control and measurement. When using programs implemented with C language GUI is difficult to watch control and monitor the smart grid system. But LabVIEW is a graphical programming language and it is easy to design GUI screen and to manage many variables such as real-time output of electric power including solar cell, wind power system and fuel cell. This paper suggests LabVIEW and C-language TCP/IP communication for smart grid monitoring system i mplemented with C-language.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.304-305
• /
• 2011

이산화탄소의 배출로 인한 지구온난화와 화석연료의 고갈로 인한 에너지난은 신재생 에너지원의 필요성을 증가시켰다. 현재 국내에서는 디젤 발전기로 전력을 공급하는 울릉도 시스템을 신재생 에너지원을 계통에 연계시키는 울릉도 녹색 사업이 진행 중에 있다. 하지만 울릉도는 육지와의 거리가 멀어 계통 연계의 어렵고 신재생 에너지원의 출력 변동성으로 인한 계통운영에 어려움이 예상된다. 울릉도의 안정적인 전력 공급을 위해 Micro-Grid EMS 구축이 요구되는 상황이며 본 논문에서는 Micro-Grid EMS 구축을 위한 방안 및 방향성을 제시하고자 한다.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2003년도 가을 학술발표논문집 Vol.30 No.2 (3)
• /
• pp.370-372
• /
• 2003

초고속 네트웍을 기반으로 지리적으로 분산된 리소스들을 공유하며 강력한 컴퓨팅 파워를 낼수 있는 GRID 환경에 관한 연구가 활발히 진행되고 있다. 본 논문에서는 GRID 환경을 구축하기 위한 기술중에 어카운팅 정보의 수집에 관해서 기술한다. 특히 클러스터 형태의 시스템에서 OGSA RSU­WG의 GSAX를 기반으로 하여 시스템을 설계하였다. 설계를 바탕으로 각 노드에서 발생하는 프로세스 어카운팅 정보를 수집하고, 통합하는 모니터링 툴의 구현에 대해 상세히 설명한다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 추계학술대회 논문집
• /
• pp.321-323
• /
• 2008

This study suggests a modeling of grid-connected wind turbine generation systems and performs simulation according to increase/decrease of real wind speed. MATLAB/Simulink implemented modeling of grid-connected wind turbine generation system. Terminal voltage, grid voltage, and active/reactive power shall be observed following the performance of simulation.

• Steel and Composite Structures
• /
• 제18권2호
• /
• pp.395-408
• /
• 2015

The paper considers the free vibration analysis of FGM grid systems. Up to now, very little work has been done on this type of system and the paper aspires to fill this gap. Based on the hybrid-stress finite element formulation free vibration solutions for FGM grid systems of various aspect ratios, different types of gradations functions, and support conditions are determined. The tabulation of these results, not available thus far, should be useful to designers and researchers who may use them.

• 한국CDE학회논문집
• /
• 제1권1호
• /
• pp.56-64
• /
• 1996

A quadrilateral-triangular mixed grid method for the solution of incompressible viscous flow is presented. The solution domain near the body surface is meshed using elliptic grid geneator to acculately simulate the viscous flow. On the other hand, we used unstructured triangular grid system generated by advancing front technique of a simple automatic grid generation algorithm in the rest of the computational domain. The present method thus is capable of not only handling complex geometries but providing accurate solutions near body surface. The numerical technique adopted here is PISO type finite element method which was developed by the present author. Investigations have been made of two-dimensional unsteady flow of Re=550 past a circular cylinder. In the case of use of the unstructured grid only, there exists a considerable amount of difference with the existing results in drag coefficient and vorticity at the cylinder surface; this may be because of the lack of the grid clustering to the surface that is a inevitable requirement to resolve the viscous flow. However, numerical results on the mixed grid show good agreements with the earlier computations and experimental data.