• The Transactions of the Korean Institute of Power Electronics
• /
• v.19 no.5
• /
• pp.399-406
• /
• 2014

This study investigates the structure and operation of the ITER VS converter and proposes a sequence control method for six series-connected VS converters to reduce reactive power. The operation and the proposed sequence control method are verified through RTDS simulation. The ITER VS converter must supply voltage/current to the superconducting magnets for plasma current vertical stabilization, and the four-quadrant operation must proceed without a zero-current discontinuous section. The operation mode of the VS converter is separated into a 12- and 6-pulse circulating current and transition modes according to the size of the load current. The output voltage of the unit VS converter is limited because of the rated voltage; however, the superconducting coil must increase the operating output voltage. Thus, the VS converter must be connected in a 6-series to provide the required operating output voltage. The output voltage of the VS converters is controlled continuously; however, reactive power is limited within a minimized value of the grid. In this study, the unit converter is compared with converters connected in a 6-series to determine a suitable sequence control method. The output voltage is the same in all cases, but the maximum reactive power is reduced from 100% to 73%. This sequence control method is verified through RTDS simulation.

• Resources Recycling
• /
• v.10 no.3
• /
• pp.14-22
• /
• 2001

For the recycle of coal fly ash generated from power stations, we developed an electrocyclone system which can separate unburned carbon form coal fly ash, based on the fact that coarse fly ash particles contain higher amount of unburned carbon and unburned carbon particles are charged positively, and pure ash particles are charged negatively on contacting each other. Additionally, guide vanes were installed in the cyclone to control the cut size. Two types of electrode, stick and grid type, were designed to investigate the effect of electrode type. Results show that by introducing an electric field inside the cyclone, the yield increases by 5 to 15e1o. But the content of unburned carbon in the clean ash does not change significantly.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.1
• /
• pp.86-92
• /
• 2016

Upon detecting a frequency event in a power system, the stepwise inertial control (SIC) of a wind turbine generator (WTG) instantly increases the power output for a preset period so as to arrest the frequency drop. Afterwards, SIC rapidly reduces the WTG output to avert over-deceleration (OD). However, such a rapid output reduction may act as a power deficit in the power system, and thereby cause a second frequency dip. In this paper, a hybrid reference function for the stable SIC of a doubly-fed induction generator is proposed to prevent OD while improving the frequency nadir (FN). To achieve this objective, a reference function is separately defined prior to and after the FN. In order to improve the FN when an event is detected, the reference is instantly increased by a constant and then maintained until the FN. This constant is determined by considering the power margin and available kinetic energy. To prevent OD, the reference decays with the rotor speed after the FN. The performance of the proposed scheme was validated under various wind speed conditions and wind power penetration levels using an EMTP-RV simulator. The results clearly demonstrate that the scheme successfully prevents OD while improving the FN at different wind conditions and wind power penetration levels. Furthermore, the scheme is adaptive to the size of a frequency event.

• Journal of the Korean Academy of Clinical Electrophysiology
• /
• v.6 no.1
• /
• pp.1-15
• /
• 2008

This study was designed to investigate the effect of treadmill exercise of low-intensity and high-intensity on the functional recovery and histological change in spinal cord injury rats. Sprague-Dawley rats were experimented(n=15) for this research. Spinal cord injury was induced by the NYU drop impacter device after laminectomy. After operation, rats were test at modified Tarlov scale at 3 days, and divided into the control group(n=5), experimental group I(n=5, low-intensity treadmill) and experimental group II(n=5, high-intensity treadmill). The rats were disciplined from 7 day through 21 day. Functional recovery was evaluated by the BBB scales and the Grid Walk test for the progressive locomotor recovery at 3, 7, 14, 21 days. Histopathological studies for the muscle in order to observation the change of damage and size of the organized surface which is visible visually it executed hematoxylin & eosin stain. According to the result of 4 weeks of treadmill exercise, group II showed improvement than group I of motor behavior after spinal cord injury.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.46-48
• /
• 2008

A concern about micro grid connection system is elevated. The reason is that carbon dioxide emission is regionally restricted to prevent the drain of fossil fuel, high oil prices and global warming. The existing photovoltaic DC-DC converter is operated by the full-bridge method. However, the configuration is complicated because a phase shift method is required to raise an efficiency. A photovoltaic DC-DC converter connected with second layered half-bridge converter and boost converter is proposed in this paper. This proposed DC-DC converter is easy to control and has an advantage of reducing the size. Finally, the validity of the proposed converter is verified by the experimentation.

• Journal of Powder Materials
• /
• v.27 no.5
• /
• pp.388-393
• /
• 2020

The enamel powders used traditionally in Korea are produced by a ball-milling process. Because of their irregular shapes, enamel powders exhibit poor flowability. Therefore, polygonal enamel powders are only used for handmade cloisonné crafts. In order to industrialize or automate the process of cloisonné crafts, it is essential to control the size and shape of the powder. In this study, the flowability of the enamel powders was improved using the spheroidization process, which employs the RF plasma treatment. In addition, a simple grid structure and logo were successfully produced using the additive manufacturing process (powder bed fusion), which utilizes spherical enamel powders. The additive manufacturing technology of spherical enamel powders is expected to be widely used in the field of cloisonné crafting in the future.

• Physical Therapy Korea
• /
• v.16 no.2
• /
• pp.41-49
• /
• 2009

This study was designed to investigate the effects of treadmill exercise of low-intensity and moderate- intensity on the functional recovery and histological change in spinal cord injury (SCI) rats. SCI was induced by the spinal cord impactor dropped after laminectomy. Experimental groups were divided into the Group I (normal control), Group II (non-treatment after SCI induction), Group III (low-intensity treadmill exercise after SCI induction), Group IV (moderate-intensity treadmill exercise after SCI induction). After operation, rats were tested at modified Tarlov scale at 2 days with divided into 4 groups, and motor behavior test (BBB locomotor rating scale, Grid walk test) was examined at 3, 7, 14, and 21 days. For the observation of damage change and size of the organized surface in spinal cord, histopathological studies were performed at 21 days by H & E, and BDNF(brain-derived neutrophic factor) & Trk-b immunohistochemistry studies were performed at 1, 3, 7, 14, 21 days. According to the results, treadmill exercise can play a role in facilitating recovery of locomotion following spinal cord injury. Specially, moderate-intensity treadmill exercise after SCI induction was most improvement in functional recovery and histological change.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.73-76
• /
• 2013

This paper proposes a tongue and its direction recognition algorithm which compares and estimates pixel distribution in the mouth area. As the size of smart phones grows, facial gesture control technology for a smart phone is required. Firstly, the nose area is detected and the mouth area is detected based on the ratio of the nose to mouth. After detecting the mouth area, it is divided by a pattern of grid and the distribution of pixels having the similar color to the tongue is tested for each segment. The recognition rate was nearly 80% in the experiments performed with five researchers among our laboratory members.

• Journal of Power Electronics
• /
• v.15 no.4
• /
• pp.939-950
• /
• 2015

A single-stage AC-AC converter has been designed for a wind energy conversion system (WECS) that eliminates multistage operation and DC-link filter elements, thus resolving size, weight, and reliability issues. A simple switching strategy is used to control the switches that changes the variable-frequency AC output of an electrical generator to a constant-frequency supply to feed into a distributed electrical load/grid. In addition, a modified random sinusoidal pulse width modulation (RSPWM) technique has been developed for the designed converter to make the overall system more efficient by increasing generating power capacity and reducing the effects of inter-harmonics and sub-harmonics generated in the WECS. The technique uses carrier and reference waves of variable switching frequency to calculate the firing angles of the switches of the converter so that the three-phase output voltage of the converter is very close to a sine wave with reduced THD. A comparison of the performance of the proposed RSPWM technique with the conventional SPWM demonstrated that the power generated by a turbine in the proposed approximately increased by 5% to 10% and THD reduces by 40% both in voltage and current with respect to conventional SPWM.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.25 no.2
• /
• pp.257-263
• /
• 2011

This study was designed to investigate the effects of Hominis placenta pharmacopuncture treatment and electroacupuncture therapy on the functional recovery and histological change, protein expression in spinal cord injury(SCI) rats. Experimental groups were divided into the Group I(normal control rat), Group II(Non-treatment after spinal cord injury induction), Group III(Hominis placenta pharmacopuncture treatment after SCI induction), Group IV (Electroacupuncture therapy after SCI induction), Group V(Hominis placenta pharmacopuncture treatment and electroacupuncture therapy after SCI induction). After operation, rats were tested at modified Tarlov test at 1 to 3 days with divided into 4 groups, and motor behavior test(BBB locomotor rating scale, Grid walk test) was examined at 3, 7, 14, and 21 days. For the observation of damage change and size of the organized surface in muscle and spinal cord, histopathological studies were performed at 21 days by H & E stain, and BDNF & NT-3 protein expression studies were performed at 21 days. Acco rding to the results, Hominis placenta pharmacopuncture treatment and electroacupuncture therapy can play a role in facilitating recovery of locomotion following spinal cord injury. Specially, Hominis placenta pharmacopuncture treatment and electroacupuncture combimed therapy after SCI induction was most improvement in functional recovery, BDNF, and NT-3 protein synthesis.