• 제목/요약/키워드: Grid Size Control

검색결과 99건 처리시간 0.03초

이동 객체 정보 보호를 위한 그리드 기반 시멘틱 클로킹 기법 (Grid-based Semantic Cloaking Method for Continuous Moving Object Anonymization)

  • 장욱;신숭선;김경배;배해영
    • 한국컴퓨터정보학회논문지
    • /
    • 제18권3호
    • /
    • pp.47-57
    • /
    • 2013
  • 최근 스마트폰의 발전에 따라서 많은 위치 기반 서비스가 활용되고 있으며, 위치 정보 노출로 인한 문제점이 사회적 이슈로 대두되고 있다. 기존의 잘 알려진 위치 정보 보호를 위한 공간 클로킹 기법은 사용자가 요청한 지역에서 위치 정보를 흐릿하게 처리하였다. 하지만 계속적으로 움직이는 이동 객체의 모든 지역을 클로킹하기에는 범위공간이 무수히 넓어지는 문제를 가진다. 따라서, 본 논문에서는 이동 객체 정보 보호를 위한 그리드 기반 시멘틱 클로킹 기법을 제안한다. 제안 기법은 시멘틱 클로킹을 위하여 EMD 갱신 스키마를 확장하고 이동 객체를 위한 대표 보호지역의 클로킹을 정의하였다. 성능 평가에서는 제안 기법이 기존 기법에 비해 처리 시간과 공간 범위에서 안전성과 효율성을 높였다. 이를 통해, 성공적으로 다양한 적으로부터 지속적으로 움직이는 객체의 위치 개인 정보를 보호하여 기존의 방법을 능가하는 성능을 보인다.

동적 무선 인체 통신망의 에너지 효율과 신뢰성을 위한 토폴로지 인식 기반 패킷 크기 및 포워딩 비율 결정 방법 (Topology-aware Packet Size and Forward Rate for Energy Efficiency and Reliability in Dynamic Wireless Body Area Networks)

  • 구엔 수언 삼;김동완;안순신
    • 인터넷정보학회논문지
    • /
    • 제15권2호
    • /
    • pp.9-18
    • /
    • 2014
  • 인체에 부착된 센서들의 위치는 인간의 신체적 활동에 따라 자주 이동된다. 이에 따른 노드 위치 이동과 비가시선상의 문제들은 무선 인체 통신망에서 핫 스팟과 에너지 효율, 그리고 신뢰적인 통신 성능에 영향을 미친다. 우리는 빈번히 변화하는 네트워크 토폴로지와 채널 조건을 고려한 포워딩을 결정하는 방법을 제안하였다. 본 논문에서는 각 노드의 라우팅 레벨에서 입, 출력 링크들의 비율에 근거하여 포워딩 비율과 패킷들의 크기를 제어한다. 또한 패킷 크기와 포워딩 비율 제어를 지원하는 격자 기반의 연결을 확장함으로써 네트워크 토폴로지를 견고하게 한다. 본 논문의 시뮬레이션은 이러한 접근들이 네트워크 수명을 48.2% 증가시키는 것뿐 아니라 약 6.08%의 패킷 전달율의 증가가 있음을 증명한다. 또한 핫 스팟 문제도 본 제안을 통해 해결된다.

Control and Analysis of an Integrated Bidirectional DC/AC and DC/DC Converters for Plug-In Hybrid Electric Vehicle Applications

  • Hegazy, Omar;Van Mierlo, Joeri;Lataire, Philippe
    • Journal of Power Electronics
    • /
    • 제11권4호
    • /
    • pp.408-417
    • /
    • 2011
  • The plug-in hybrid electric vehicles (PHEVs) are specialized hybrid electric vehicles that have the potential to obtain enough energy for average daily commuting from batteries. The PHEV battery would be recharged from the power grid at home or at work and would thus allow for a reduction in the overall fuel consumption. This paper proposes an integrated power electronics interface for PHEVs, which consists of a novel Eight-Switch Inverter (ESI) and an interleaved DC/DC converter, in order to reduce the cost, the mass and the size of the power electronics unit (PEU) with high performance at any operating mode. In the proposed configuration, a novel Eight-Switch Inverter (ESI) is able to function as a bidirectional single-phase AC/DC battery charger/ vehicle to grid (V2G) and to transfer electrical energy between the DC-link (connected to the battery) and the electric traction system as DC/AC inverter. In addition, a bidirectional-interleaved DC/DC converter with dual-loop controller is proposed for interfacing the ESI to a low-voltage battery pack in order to minimize the ripple of the battery current and to improve the efficiency of the DC system with lower inductor size. To validate the performance of the proposed configuration, the indirect field-oriented control (IFOC) based on particle swarm optimization (PSO) is proposed to optimize the efficiency of the AC drive system in PHEVs. The maximum efficiency of the motor is obtained by the evaluation of optimal rotor flux at any operating point, where the PSO is applied to evaluate the optimal flux. Moreover, an improved AC/DC controller based Proportional-Resonant Control (PRC) is proposed in order to reduce the THD of the input current in charger/V2G modes. The proposed configuration is analyzed and its performance is validated using simulated results obtained in MATLAB/ SIMULINK. Furthermore, it is experimentally validated with results obtained from the prototypes that have been developed and built in the laboratory based on TMS320F2808 DSP.

적운 모수화 방안이 고해상도 집중호우 예측에 미치는 영향 (Impact of Cumulus Parameterization Schemes with Different Horizontal Grid Sizes on Prediction of Heavy Rainfall)

  • 이재복;이동규
    • 대기
    • /
    • 제21권4호
    • /
    • pp.391-404
    • /
    • 2011
  • This study investigates the impact of cumulus parameterization scheme (CPS) with different horizontal grid sizes on the simulation of the local heavy rainfall case over the Korean Peninsula. The Weather Research and Forecasting (WRF)-based real-time forecast system of the Joint Center for High-impact Weather and Climate Research (JHWC) is used. Three CPSs are used for sensitivity experiments: the BMJ (Betts-Miller-Janjic), GD (Grell-Devenyi ensemble), and KF (Kain-Fritsch) CPSs. The heavy rainfall case selected in this study is characterized by low-level jet and low-level transport of warm and moist air. In 27-km simulations (DM1), simulated precipitation is overestimated in the experiment with BMJ scheme, and it is underestimated with GD scheme. The experiment with KF scheme shows well-developed precipitation cells in the southern and the central region of the Korean Peninsula, which are similar to the observations. All schemes show wet bias and cold bias in the lower troposphere. The simulated rainfall in 27-km horizontal resolution has influence on rainfall forecast in 9-km horizontal resolution, so the statements on 27-km horizontal resolution can be applied to 9-km horizontal resolution. In the sensitivity experiments of CPS for DM3 (3-km resolution), the experiment with BMJ scheme shows better heavy rainfall forecast than the other experiments. The experiments with CPS in 3-km horizontal resolution improve rainfall forecasts compared to the experiments without CPS, especially in rainfall distribution. The experiments with CPS show lower LCL(Lifted Condensation Level) than those without CPS at the maximum rainfall point, and weaker vertical velocity is simulated in the experiments with CPS compared to the experiments without CPS. It means that CPS suppresses convective instability and influences mainly convective rainfall. Consequently, heavy rainfall simulation with BMJ CPS is better than the other CPSs, and even in 3-km horizontal resolution, CPS should be applied to control convective instability. This conclusion can be generalized by conducting more experiments for a variety of cases over the Korean Peninsula.

지하철 터널 화재시 환기시설의 용량에 따른 제연효과 I. FDS 시뮬레이션 (Smoke Control According to the Ventilation Capacity in Subway Tunnel Fire: I. FDS Simulation)

  • 박경준;이기준;;이재효;신동일
    • 한국가스학회지
    • /
    • 제15권3호
    • /
    • pp.31-38
    • /
    • 2011
  • 본 연구에서는 미국 NIST의 Fire Dynamics Simulator (FDS) ver. 5.4.8을 이용하여 지하철 터널 안의 지하철에서 화재가 발생한 경우에 터널에 설치된 환기팬의 제연효과를 검증하였다. 시뮬레이션을 위해 서울 지하철의 실측 자료를 활용하여 지하터널과 지하철을 모델링 하였다. 이를 바탕으로 환기용량을 2.0~3.0 m/s 범위에서 변화시키면서 CO와 $CO_2$의 제거 효율을 예측한 결과, 0.5 m/s의 용량 증가에 의해 평균 35 % 이상의 제거효과가 있음을 확인하였다. 또한 FDS의 결과값이 전체 그리드 개수와 크기에 영향을 받는 점을 고려하여 정확한 결과값을 얻기 위해 FDS의 그리드 민감성을 검토하였다. 그리고 그리드 크기를 변화시켜 CO와 $CO_2$ 농도 산출값과 계산에 걸리는 시간을 비교한 결과를 바탕으로 최적의 그리드를 선정하여 시뮬레이션에 적용하였다.

스마트그리드의 탭 전환 자동 전압 조정기의 다중 스위칭 제어 방법 및 활용 방안에 관한 연구 (A Study on the Utilization and Control Method of Hybrid Switching Tap Based Automatic Voltage Regulator on Smart Grid)

  • 박광윤;김정률;김병기
    • 한국컴퓨터정보학회논문지
    • /
    • 제17권12호
    • /
    • pp.31-39
    • /
    • 2012
  • 본 논문에서는 수용가의 에너지 절감과 최대수요전력 제어를 위하여 마이크로프로세서를 이용한 자동 전압 조정기(AVR)를 제안한다. 제안한 자동 전압 조정기(HS-AVR : Hybrid Switching Automatic Voltage Regulator)는 토로이달 코어에 1개의 직렬 권선과 분리된 4개의 분로 권선으로 구성되어 있는 단권변압기를 사용한다. 변압기의 전압 조정은 직렬 권선과 분로 권선의 연결 방법에 따라 감압/승압이 가능하다. 스위치는 릴레이와 트라이악을 병행하여 사용한다. 스위치의 조작 시 발생하는 권선의 여자돌입전류를 제어하기 위하여 트라이악을 이용하여 연결 상태를 변경하고, 연결 상태 유지 시에는 릴레이를 이용함으로써 스위치 소비 전력을 최소화 한다. 제어 신호는 여자 돌입 전류를 줄이기 위하여 전압 파형에 동기화 하여 제어되며 이를 위하여 소프트웨어 PLL을 사용한다. 소프트웨어 PLL은 전압 파형의 제로크로스, 전압 최고점 등의 동기화에 사용함으로써 스위치와 시스템을 최소화한다. 기존 전압 조절 스위치나 자동 전압 조정기 구조는 여자 돌입 전류로 인한 스위치 접점 손상을 막기 위하여 최대전류를 수용할 수있는 용량으로 구성함으로써 장치 크기가 매우 커지는 문제점이 있었다. 본 논문은 이런 문제를 해결하여 자동 전압 조정기의 크기를 줄이고 효율을 높이는 방법을 제안하였다.

축전지 사업장에서 공기 중 납 농도의 변화에 관한 연구 (A study on the change of air lead concentrations in lead-acid battery plants)

  • 최승현;김남수;김진호;조광성;함정오;안규동;이병국
    • 한국산업보건학회지
    • /
    • 제17권4호
    • /
    • pp.261-271
    • /
    • 2007
  • To provide necessary information for future environmental monitoring of storage batteries in Korea, authors analyzed environmental monitoring dataset of air lead concentration of 12 storage battery industries measured during 1989-2006. We calculated geometric mean and standard deviation with minimum and maximum value of each year dataset. Air lead concentration data were analyzed according to year of measurement, type of grid manufacturing method (grid casting type or expander type), size of industries and type of operation (casting, lead powder & pasting, assembly and others). The geometric mean and standard deviation of all lead industries for overall 18 years were $72{\mu}g/m^3$ and 3.65 with minimum of $6{\mu}g/m^3$ and maximum of $7,956{\mu}g/m^3$. The geometric mean air lead concentrations of years between 1989-1999 were above the Korean PEL($50{\mu}g/m^3$), whereas those of years after year 2000 were below the Korean PEL showing 50% of it. The geometric mean concentration of air lead was significantly lower in expander method battery industries than that of grid method battery industries and was lower in large sized battery industries than small & medium sized ones throughout the whole 18 years period. The distributions of over PEL($50{\mu}g/m^3$) were decreased by the years of environmental monitoring and those were lower in expander method battery industries than grid method battery industries. The significant reduction of mean air lead concentration during last 10 years may be induced partly due to more active environmental engineering control and new introduction of new operation in grid method battery industries, but may be also influenced by non-engineering method such as reduction of operation hours or reduction of exposure time during actual environmental measurement by industrial hygienist which is not concrete evidence, but just circumstantial evidence.

지리정보체계를 이용한 안산시의 오픈스페이스 분석 (An Analysis of Urban Open Space with Geographic Information Systems - A Case Study of Ansan City, Korea -)

  • 서동조;박종화
    • 대한원격탐사학회지
    • /
    • 제6권2호
    • /
    • pp.89-113
    • /
    • 1990
  • The purpose of this study is to develop means to apply GIS and remote sensing technology to the analysis of Korean urban open spaces. To achieve this objective, a framework of analysis of urban open spaces was developed, and then the framework was applied for the evaluation of the potential and suitability of open spaces of Ansan City, which is a new town developed to accomodate industries relocation from Seoul, Korea, mainly due to their pollution problems. The software used in this study are IDRISI, a grid-based GIS, and KMIPS, a remote sensing analysis system. Both packages are based on IBM PC/AT computers with Microsoft DOS. Landsat MSS and TM data were used for the land use classification, land use change detection, and analysis of transformed vegetation indices. The size of the geographic data base is 110 rows and 150 columns with the spatial resolution of 100m$\times$100m. The framework of analysis includes both quanititative and qualitative analysis of open spaces. The quantitative analysis includes size and distribution of open spaces, urban develpment of open spaces, and the degree of vegree of vegetation removal of the study area. The qualitative analysis includes evaluative criteria for primary productivity of land, park use potential, major visual resources, and urban environmental control. The findings of this study can be summarized as follows. First, the size of builtup areas increased 18.73km$^2$, while the size of forest land decreased 10.86km$^2$ during last ten years. Agricultural lands maintained its size, but shifted toward outside of the city into forest. Second, the potential of open spaces for park use is limited mainly due to their lack of accessibility and connectivity among open spaces, in spite of ample acreage and good site conditions. Third, major landscape elements and historic sites should be connected to the open space system of the city by new accesses and buffers.

An Improved SVPWM Control of Voltage Imbalance in Capacitors of a Single-Phase Multilevel Inverter

  • Ramirez, Fernando Arturo;Arjona, Marco A.
    • Journal of Power Electronics
    • /
    • 제15권5호
    • /
    • pp.1235-1243
    • /
    • 2015
  • This paper presents a modified Space Vector Pulse Width Modulation Technique (SVPWM), which solves the well-known problem of voltage imbalance in the capacitors of a single-phase multilevel inverter. The proposed solution is based on the measurement of DC voltage levels at each capacitor of the inverter DC bus. The measurements are then used to adjust the size of the active vectors within the SVPWM algorithm to keep the voltage waveform sinusoidal regardless of any voltage imbalance on the DC link capacitors. When a voltage deviation exceeds a predetermined hysteresis band, the correspondent voltage vector is restricted to restore the voltage level to an acceptable threshold. Hence, the need for external voltage regulators for the voltage capacitors is eliminated. The functionality of the proposed algorithm is successfully demonstrated through simulations and experiments on a grid tied application.

고성능 셀/패킷 스위치를 위한 고속 VOQ 관리기 설계 (Design of High-Speed VOQ Management Scheme for High Performance Cell/Packet Switch)

  • 정갑중;이범철
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
    • /
    • pp.369-372
    • /
    • 2001
  • This paper presents the design of high-speed virtual output queue(VOQ) management scheme for high performance cell/packet switch, which has a serial cross bar structure. The proposed VOQ management scheme has been designed for wire-speed routing with a pipelined buffer management. It provides the tolerance of requests and grants data transmission latency between the VOQ manager and central arbiter using a new request control method that is based on a high-speed shifter. The designed VOQ manager has been implemented in a field programmable gate array chip with a 77MHz operating frequency, a 900-pin fine ball grid array package, and 16$\times$16 switch size.

  • PDF