• Journal of Korean Society of Forest Science
• /
• v.98 no.4
• /
• pp.491-495
• /
• 2009

This study was conducted to investigate the propagation characteristics of Cephalotaxus koreana by cutting, whose plant has been known to new anticancer treatments. The treatments of plant growth regulators, cutting media temperature and growing media were investigated to know the rooting ability of cuttings. For rooting formation affected by plant growth regulators and its concentration, The application of IBA 100 mg/L was most effective in all of the characteristics including rooting rate of 88.5%. The optimum media temperature by cutting was $24^{\circ}C$ (treatment IBA 100 mg/L, rooting rate 84.6%), predicting that greenwood cutting from June to July is most effective. VPPL (vermiculite+peatmoss+perlite 1:1:1(v/v/v)) showed the highest value in all of the characteristics including rooting rate of 68.5% for the effect of growing media on rooting formation.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.15 no.2
• /
• pp.139-148
• /
• 1987

Exochorda serratifolia, broad-leaved shrub has beautiful flowers and is resistant to cold, shade and decease. New this native plant is considered to be worth being exploited as the outstanding plant for landscaping and horticulture. So this study was executed to utilize Exochorda serratifolia as the planting material for landscaping and horticulture through the survey of its habitat environment and the experimennt of its seed physiology and germination, vegetative propagation, culture and utilization, etc.. The results are as follows ; 1. The color of the flower is white, blooming in the early and middle of May and the seeds ripen late in Sep.. 2. The elevation, elevation, gradient and direction of the native habitat were 250m, 20-25$^{\circ}$and northern side respectively. 3. The soil pH of the natural habitat was 5.3 and soil fertility was poor. 4. Exochorda serratifolia appeared as indicator within P. densiflora community and its neighboring species were Q. mongolica, Q. dentata, R. mucronulatum, L. obtusiloba, E. oxyphillus, C. heterolphylla, var thunbergii, etc.. 5. The optimum temperature for seed germination was found at 20$^{\circ}C$ and the longer the stratification period at 5$^{\circ}C$ was, the lower the germination rate was. 6. The treat merits of GA and Kinetin increased the seed germination rate, especially under the dark condition but their high concentrations decreased the seed germination rate. 7. The rooted rate of the greenwood cutting was the highest at IBA 100ppm plot of vermiculite bed but its high concentration decreased the rooted rate conspicuously. 8. In the tissue culture, the each 1.0 ppd plot of NAA, Kinetin and NAA 1.0ppm + Kinetin showed the best growth. And the mixture of NAA 1.0ppm and Kinetin showed better growth than the single treatment of NAA or Kinetin did. 9. Transplanted Exochorda serratifolia showed healthy growth with shaded environmental condition(42.1% light intensity), therefore they can be cultivated as a shade tolerant landscape plant. 10. It was considered that Exochorda serratifolia was applicable to group planting at shade places or under trees in parks, homes, etc..

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.7
• /
• pp.992-1006
• /
• 2018

Beef production extends over almost half of Australia, with about 47,000 cattle producers that contribute about 20% ($A12.7 billion gross value of production) of the total value of farm production in Australia. Australia is one of the world's most efficient producers of cattle and was the world's third largest beef exporter in 2016. The Australian beef industry had 25 million head of cattle in 2016-17, with a national beef breeding herd of 11.5 million head. Australian beef production includes pasture-based cow-calf systems, a backgrounding or grow-out period on pasture, and feedlot or pasture finishing. Feedlot finishing has assumed more importance in recent years to assure the eating quality of beef entering the relatively small Australian domestic market, and to enhance the supply of higher value beef for export markets. Maintenance of Australia's preferred status as a quality assured supplier of high value beef produced under environmentally sustainable systems from 'disease-free' cattle is of highest importance. Stringent livestock and meat quality regulations and quality assurance systems, and productivity growth and efficiency across the supply chain to ensure price competiveness, are crucial for continued export market growth in the face of increasing competition. Major industry issues, that also represent research, development and adoption priorities and opportunities for the Australian beef industry have been captured within exhaustive strategic planning processes by the red meat and beef industries. At the broadest level, these issues include consumer and industry support, market growth and diversification, supply chain efficiency, productivity and profitability, environmental sustainability, and animal health and welfare. This review provides an overview of the Australian beef industry including current market trends and future prospects, and major issues and opportunities for the continued growth, development and profitability of the industry.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.7
• /
• pp.927-932
• /
• 2018

The demand for beef as a protein source is increasing worldwide, although in most countries beef accounts for considerably less than half of total meat consumption. Beef also provides a highly desirable eating experience in developed countries and, increasingly, in developing countries. The sustainability of beef production has different meanings in the various geographical and socio-economic regions of the world. Natural resources including land mass and uses, rainfall and access to livestock feed, and the robustness of the economy are major determinants of the perception of beef sustainability. In this overview of the 2016 International Symposium on "Future Beef in Asia" and this subsequent Special Edition of the Asian-Australasian Journal of Animal Sciences on "Current Situation and Future Prospects for Global Beef Production", the contributions have been grouped into the following categories: Countries in Southeast Asia; Europe; and Countries producing highly marbled beef for export and/or domestic consumption. They also include reference to Special Topics including marbled beef production, and use of "omics" technologies to enhance beef quality assurance. Among these broad categories, notable differences exist across countries in the production and marketing of beef. These reflect differences in factors including natural resource availability and climate, population size, traditional culture and degree of economic development including industrial and technological developments. We trust that the International Symposium and this Special Edition on Current Situation and Future Prospects for Global Beef Production, the contents of which that are briefly summarized in this paper, will serve as a valuable resource for the livestock industries, researchers and students with an interest in enhancing the prospects for sustainable, efficient beef production that satisfies the growing size and complexity of consumer demands and markets for beef.

• Journal of the Korean Society of Radiology
• /
• v.12 no.4
• /
• pp.491-496
• /
• 2018

The purpose of this study is to analyze the noise spectra in DWI (diffusion-weighted imaging) pulse sequences of 1.5 Tesla and 3.0 Tesla MRI, The ACR (American College of Radiology) phantom and noise spectrum were analyzed by FFT (fast Fourier transform) and TFFT (temporal frequency analysis) using WavePad sound editor version 8.13 (NCH software, Greenwood Village, CO, USA). Noise spectra, FFT and TFFT were analyzed for laboratory 1.5Tesla and 3.0Tesla DWI MR pulse sequences. The noise threshold of the frequency amplitude in the FFT and TFFT at 3.0Tesla compared to 1.5Tesla was between 1.5Tesla and -6 dB, and between 3.0Tesla and 0 dB, the DWI pulse sequence for the patient's noise reduction was appropriately MR examination needs to be applied.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.34 no.3 s.116
• /
• pp.79-90
• /
• 2006

Tamarix chinenis blooms twice a you and its flowers, branches and leaves make the adjustment of tree shape. Propagation methods and growth characteristics of T. chinensis were studied in order to ascertain its potential use as one of vegetation resources for coast forestation and landscaping. The study results indicated that 1 or 2 you old hard wood cuttings showed higher rooting ratio than greenwood or semi hard wood cuttings. One to one mixture between vermiculite and pearlite appeared to be the best for bed soil, and sea sand and silt(loess) mixture was the next. Sea sand and granitic soil followed after. In terms of seasonal differences, spring cuttings showed the best rooting ratio, root number, and root length. Fall cuttings followed after spring cutting, and summer cuttings showed worst results regarding rooting ratio, root number, and root length. The best rooting promotion effects of growth regulators were observed with sea sand bed soils. There was no significant difference among growth regulators in terms of rooting and shoot growth. Low concentration below 100 ppm of growth regulators was enough for rooting promotion effect. In general, the number and mean length of roots and shoots were showed the excellent records in the sites with high rooting ratio. The study result strongly showed that T. chinensis can be considered as a suitable tree for coast forestation and landscaping because of its easy cutting propagation and rapid growth on saline lands.

• Journal of the Semiconductor & Display Technology
• /
• v.9 no.1
• /
• pp.5-10
• /
• 2010

Among a variety of cleaning processes, the cryogenic carbon dioxide ($CO_2$) cleaning has merits because it is highly efficient in removing very fine particles, innoxious to humans and does not produce residuals after the cleaning, which enables us to extend its area of coverage in the semi-conductor fabrication society. However, the cryogenic carbon dioxide cleaning method has some technical research issues in aspect to particles' adhesion and removal. To resolve these issues, performing an analysis for the identification of particle adhesion mechanism is needed. In this study, a research was performed by a theoretical approach. To this end, we extended the G-T (Greenwood-Tripp) model by applying the JKR (Johnson-Kendall-Roberts) and Lennard-Jones potential theories and the statistical characteristics of rough surface to investigate and identify the contact, adhesion and deformation mechanisms of soft or hard particles on the rough substrate. The statistical characteristics of the rough surface were taken into account through the employment of the normal probability distribution function of the asperity peaks on the substrate surface. The effects of surface roughness on the pull-off force for these particles were examined and discussed.

• Tribology and Lubricants
• /
• v.32 no.4
• /
• pp.132-139
• /
• 2016

The piston of a marine diesel engine works under severe conditions, including a combustion pressure of over 180 bar, high thermal load, and high speed. Therefore, the analyses of the fatigue strength, thermal load, clamping (bolting) system and lubrication performance are important in achieving a robust piston design. Designing the surface profile and the skirt ovality carefully is important to prevent severe wear and reduce frictional loss for engine efficiency. This study performs flexible multi-body dynamic and elasto-hydrodynamic (EHD) analyses using AVL/EXCITE/PU are performed to evaluate tribological characteristics. The numerical techniques employed to perform the EHD analysis are as follows: (1) averaged Reynolds equation considering the surface roughness; (2) Greenwood_Tripp model considering the solid_to_solid contact using the statistical values of the summit roughness; and (3) flow factor considering the surface topology. This study also compares two cases of skirt shapes with minimum oil film thickness, peak oil film pressure, asperity contact pressure, wear rate using the Archard model and friction power loss (i.e., frictional loss mean effective pressure (FMEP)). Accordingly, the study compares the calculated wear pattern with the field test result of the piston operating for 12,000h to verify the quantitative integrity of the numerical analysis. The results show that the selected profile and the piston skirt ovality reduce friction power loss and peak oil film pressure by 7% and 57%, respectively. They also increase the minimum oil film thickness by 34%.

• Tribology and Lubricants
• /
• v.34 no.1
• /
• pp.23-32
• /
• 2018

Coupling is a mechanical component that transmits rotational force by connecting two shafts. Curvic coupling is widely used in high-performance systems because of its excellent power transmission efficiency and easy machining. However, coupling applications change dynamic behavior by reducing the stiffness of an entire system. Contact surface stiffness is an important parameter that determines the dynamic behavior of a system. In addition, the roughness profile of a contact surface is the most important parameter for obtaining contact stiffness. In this study, we theoretically establish the process of contact and bending stiffness analysis by considering the rough surface contact at Curvic coupling. Surface roughness parameters are obtained from Nayak's random process, and the normal contact stiffness of a contact surface is calculated using the Greenwood and Williamson model in the elastic region and the Jackson and Green model in the elastic-plastic region. The shape of the Curvic coupling contact surface is obtained by modeling a machined shape through an actual machining tool. Based on this modeling, we find the maximum number of gear teeth that can be machined according to the contact angle. Curvic coupling stiffness is calculated by considering the contact angle, and the calculation process is divided into stick and slip conditions. Based on this process, we investigate the stiffness characteristics according to the contact angle.

• The Korean Journal of Nuclear Medicine
• /
• v.6 no.2
• /
• pp.41-47
• /
• 1972

The radioimmunoassay of human thyrotropin was performed in various thyroid states, utilizing the anti-h-T.S.H. antibody and purified human thyrotropin supplied from National Institute of Arthritis and Metabolic Diseases, Bethesda, Ma., U.S.A., and human thyrotropin standard-A obtained from National Institute for Biologic Standards, Mill Hill, London, England. $^{131}I$ labelled h-TSH was prepared after the Chloramine-T method of Greenwood et al. This double antibody system had a assay sensitivity of about $1.0{\mu}U/ml$ of plasma HTS-A and could detect the plasma h-TSH level in the euthyroid patients. Plasma h-TSH level of the normal 26 Korean was $1.1{\pm}0.83{\mu}U/ml$, and that of the 8 hypothyroidisms were 8.3 to $67.5{\mu}U/ml$. In hyperthyroidisms, no cases showed the plasma h-TSH levels over $1.0{\mu}U/ml$. Between the hypothyroidism and euthyroidsm, no overlap is noticed on plasma h-TSH levels. A case of transient hypothyroid state identified by determination of plasma h-TSH level is presented. These results revealed that the radioimmunoassay of h-TSH in plasma could be a sensitive method to diagnose the hypothyroidsm, if not caused by a pituitary disease.