• Journal of Climate Change Research
• /
• v.7 no.3
• /
• pp.289-297
• /
• 2016

In this study, we researched the emission source category and it was calculated emissions estimates from existing research or literature review related to port. In addition, we have created the basis for a policy that can reduce greenhouse gas emissions calculation based on the results of the harbor. Greenhouse gas emissions estimation results, we proposed a method for allocating the GIS space. In this study, we confirmed based on the calculated greenhouse gas emissions by sources resulting in the GIS Map Port result of the expression construct for space allocation. Based on these results, it tries to provide the basic data that can be used when you want to create a local government measures to reduce scenario in the future.

• Journal of Environmental Science International
• /
• v.22 no.9
• /
• pp.1105-1113
• /
• 2013

This paper attempted to estimate the emissions of HFC-134a from scrap truck as a result of measuring the residual quantities of HFC-134a in air conditioner of scrap truck. We measured the residual amounts in the scrap truck of 138 by applying commercial recover for refrigerants. The average residual rate(disposal-phase emission factor) is reported to be $44.3{\pm}3.3%$ within a confidence interval of 95%. Recent year model trucks exhibit the higher residual rates. Little variation, however, is observed in regard to vehicle size. The HFC-134a emission quantity from scrap truck in 2011 is estimated to be 55,908 $tCO_2$-eq that demonstrates 21.4% increase to compare with that in 2007. As the numbers of truck have increased dramatically during the last two decades, the emissions of HFC-134a from scrap truck would increase sharply in the next coming years. HFC-134a is a very high GWP greenhouse gas. therefore have to reduce the emissions from the scrap truck and need to find ways to recycle. The chemical compositions of refrigerants from scrap truck are quite similar to those of new refrigerants, suggesting that the refrigerants from scrap truck could be reused as refrigerant.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.16 no.4
• /
• pp.336-342
• /
• 2014

This study was conducted to estimate of the greenhouse gas inventory on forest land at provincial level. The greenhouse gas emissions are calculated according to the K-MRV guidance. We collected activity data from statistical yearbook of forestry and used default emission factors. The annual total $CO_2$ emission in forest land was -58,711Gg $CO_2eq.$ and the annual $CO_2$ emission in loss such as fellings, fuelwood and fire was 19,896Gg $CO_2eq.$ in 2011. The results showed the removals of carbon dioxide in the forest land, it's amount was -38,815Gg $CO_2eq.$ in 2011. Annual net $CO_2$ removal of local forest was highest in Kangwon province in 2011. Our study did not use the many statistics due to exclusion of double counting. There are need complementary activity data and emission factors, and then we will find a way to calculate the greenhouse gas emissions/removals in the near future.

• Journal of Climate Change Research
• /
• v.9 no.1
• /
• pp.69-74
• /
• 2018

The purpose of this study is to suggest the methodology of $CO_2$ Emission Factor Verification and Quantitative Assessment in Ethylene Product Processes. At first, this study compare the IPCC (Intergovernmental Panel on Climate Change) 1996 Guideline and 2006 Guideline. And analyse methodology for estimating $CO_2$ emission and $CO_2$ emission factor in Ethylene product process. Also analyse cases of estimating $CO_2$ emission factor based on material balance. Methodology of $CO_2$ Emission Factor Verification and Quantitative Assessment are following the categories proposed by GIR (Greenhouse Gas Inventory and Research Center). There are total 12 factors in 8 categories and give 5 or 10 points according to their importance. Also this study suggests necessary data of document to meet the conditions. The result would help estimate accuracy Greenhouse Gas Inventory. Also contribute to establish policy on environmental assessment, air conservation, etc.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.1
• /
• pp.108-117
• /
• 2016

In this paper, a portal system compatible with MRV regulation was designed to monitoring, reporting and verifying $CO_2$ emission and fuel consumption data from an international ship. A portal system supports monitoring and reporting task of international shipping companies and calculates national greenhouse gas inventory. EU MRV law, MRV discussions of IMO, responses of international shipping companies to ship energy efficiency and greenhouse gas regulation, and greenhouse gas statistics on international shipping were analyzed to drive portal system requirements. For ship energy efficiency and $CO_2$ emitted monitoring, a data collection module was designed based on on-board equipment, energy efficiency measuring device and navigation report. Data transfer module with easy management and minimized usage to transfer ship data to shore was designed. A portal system was designed to convert the collected data into the standard reporting format, perform monitoring, statical analysis, verification and auto report generation, and support national greenhouse gas inventory.

• Journal of Korean Society of Transportation
• /
• v.32 no.6
• /
• pp.694-702
• /
• 2014

Since Greenhouse Gas Inventory & Research Center (GIR) of Korea was founded in 2010, the annual greenhouse gas inventory reports, one of the collections of GIR's major affairs, have been published from 2012. In the reports many items related to greenhouse gas emission quantities are included, but among them uncertainty values are replaced to basic values which IPCC guideline suggests. Even though IPCC guideline suggests the equations of each Tier level in details, the guideline recommends developing nation's own methodology on uncertainty which is closely related to statistical problems such as the estimation of a probability density function or Monte carlo methods. In the road transportation sector the emissions have been calculated by Tier 1 but the uncertainties have not been reported. This study introduce a bootstrap technique and Monte carlo method to estimates annual emission quantity and uncertainty, given activity data and emission factors such as annual traveled distances, fuel efficiencies and emission coefficients.

• Journal of Korean Society of Forest Science
• /
• v.112 no.4
• /
• pp.515-522
• /
• 2023

The aim of this study was to quantitatively evaluate a new stem volume table for estimating the growth, carbon storage, and greenhouse gas (GHG) absorption in Cryptomeria japonica and Chamaecyparis obtusa stands and to provide suggestions for improving the domestic GHG inventory. Carbon storage and GHG absorption were estimated using growing stock data obtained from invariable sub-sample plots between the 6^th and 7^th national forest inventories. We assessed changes in growing stock using the parameters employed by Kozak (1988) and Versions 1 and 2 of the stem volume table. Version 2 has new stem tables for 16 species, including Cryptomeria japonica, which were unavailable in Version 1. Version 2 also includes new data for trees with diameters at breast height equal to or greater than 30 cm. We found greater growing stock values using Version 2 than Version 1 for both stands, and the differences were statistically significant (p<0.001). Applying the new stem volume table increased GHG absorption by 22% for the Cryptomeria japonica stand and 13% for the Chamaecyparis obtusa stand. The growing stock estimation method used in this study should therefore be applied to re-estimate GHG absorptions in the forestry sector to produce accurate statistics for the IPCC guidelines.

• Journal of Climate Change Research
• /
• v.4 no.2
• /
• pp.159-175
• /
• 2013

Emission reduction targets to respond to climate change have been discussed and set locally, nationally and globally. After Korean government set the national target in 2009, 16 metropolitan cities established voluntary emission reduction targets by 2020. This study review and compare historical greenhouse gas emissions, reduction target by 2020 and strategies in 16 metropolitan cities. Most cities chose a consumption-based inventory approach. Some cities set the reduction target excluding land use change and forestry (LUCF) at 30% against business-as-usual by 2020, while others set the absolute reduction target against past year including LUCF. The stringency of reduction target in metropolitan cities was evaluated differently according to the comparative indicators such as the targets against BAU or past year and per capita emission, etc. Key mitigation sectors were different across metropolitan cities. It is suggested that national government share detailed raw data for metropolitan cities' emission inventory with the local government. Using advanced mitigation model and two types' target based on BAU and historical year and integrating local government's climate change plan with its energy plan are also required.

• Journal of Climate Change Research
• /
• v.3 no.4
• /
• pp.235-243
• /
• 2012

Mobile sources are one of the most significant contributors to the inventory of greenhouse gas (GHG). The administration in Korea has set a goal of cutting GHG emissions of vehicles by 34.3% compared to Business As Usual (BAU) by 2020. To achieve this goal, GHG emission standards for vehicles have been applied since 2012, and now light-duty trucks are under consideration to be included to the vehicle types that will be regulated in the new version of GHG emission standards. Therefore, this study focuses on analyzing characteristics of exhaust GHGs (CO2, CH4, and N2O) emissions of diesel light-duty trucks according to their various driving modes. GHGs emissions of diesel light-duty trucks reduced in inverse proportion to the speed of the vehicles. GHGs emissions from the combined mode were 8% and 14% lower than those from the CVS- 75 and NEDC modes, respectively.

• Transactions of the Korean hydrogen and new energy society
• /
• v.20 no.2
• /
• pp.168-178
• /
• 2009

To check feasibility of SEWGS(Sorption Enhanced Water Gas Shift) system, conceptual design and sensitivity analysis of operating variables have been investigated based on a design program of two-interconnected fluidized bed. Based on the conceptual design results, the optimum configuration for SEWGS was considered. Among three configurations, bubbling beds system was selected as the best configuration. Process design results indicate that the SEWGS system is compact and feasible. Based on the selected operating conditions, the effects of variables such as pressure, $CO_2$ capture capacity, solid inventory, CO conversion and $CO_2$ capture efficiency have been investigated as well.