• Environmental and Resource Economics Review
• /
• v.9 no.5
• /
• pp.973-997
• /
• 2000

The carbon tax is one of several measures to reduce the green-house gases emitted from burning the fossil fuels, which has been much discussed internationally. The analyses of the effects of a carbon tax on individual countries have been carried out by applying the computable general equilibrium(CGE) models, especially models with the assumption of non-existence of scale economies. However, the introduction of scale economies to CGE models changes the simulation results drastically. In this paper, two CGE models are used to compute and compare the economic and $CO_2$ reduction effects of a carbon tax, one of with is the model with scale economies and the other is without scale economies. One of main results is that the analysis using the CGE model without scale economies may underestimate the effects of a carbon tax on GDP and reducing the emission of $CO_2$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1529-1530
• /
• 2007

The manganese co-doped $Ca_8Mg_1(SiO_4)_4Cl_2:Eu^{2+}$,$Mn^{2+}$ phosphor was synthesized by solid-state reaction and its photoluminescence characteristics were investigated. The synthesized phosphor show two emission spetrums: green band of 512nm and yellow band of 550nm. White light-emitting diodes (LEDs) were fabricated through combination of a 405nm-emitting InGaN chip and a synthesis phosphor in a single package. Under 20mA current, its CIE chromaticity coordinates are x=0.40 and y=0.45 and a color temperature of 4053K.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1440-1442
• /
• 2007

In this work, we have modeled and fabricated microcavity-enhanced OLED using the 1-dimensional distributed Bragg reflector model (DBR). Results show that simulated spectrum intensity of microcavity OLED increased more than 30% compared to the conventional OLED, by use of DBR with $TiO_2$ and $SiO_2$. Spectral change of green and blue emission was expected to give the deeper color. The experimental design and characterization as well as the matching with simulated properties were performed for microcavity OLED for actual application.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.957-960
• /
• 2002

Electroluminescence(EL) from conjugated polymers has recently received great attention because polymer light-emitting diodes(LEDs) clealy have potential for applications such as large-area displays. The operation of polymer LEDs is based on double injection of electrons and holes from the elextrodes, followed by formation of excitons whose radiative decay results in light emission at wavelength characteristic to the material. In this paper, we fabricated the single layer EL device using $Alq_3$ as emitting material. According as turn on voltage could know about 5.5V in voltage-current characteristics and voltage rise, current could see that increase as non-linear. Current and ruminance can see that express similar relativity in voltage, and could know that ruminance is expressing current relativity.

• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.2 no.2
• /
• pp.137-142
• /
• 2016

We have successfully synthesized of 4-cyano-1-(2,4-dichlorophenyl)-5-(4-[$^{11}C$]methoxyphenyl)-N-(piperidin-1-yl)-1H-pyrazole-3-carboxzmide ([$^{11}C$]OMAR), which has been shown a progressing candidate to human brain PET study, from fully automated loop method using ethanol as the only solvent for the entire manufacturing process. The radiochemical yield of [$^{11}C$]OMAR was observed in $4.1{\pm}0.2%$ with $4990{\pm}384Ci/mmol$ of the specific activity and total synthesis time was about 45 minutes after HPLC purification (n = 3, decay corrected) from ethanolic loop system, which was exhibited to better results compared with conventional methods. Ethanolic loop chemistry is favorable and efficient method by simplifies manufacturing procedures as well as satisfied suitable for human administration.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.625-628
• /
• 2006

It is known that cement production not only consumes large amount of energy but also contributes substantially to the green house gas emission. Therefore, there is a demand to develope a new technology to produce energy efficient and environmental conscious cements. The most recent, wood wool ceramic board is being applied in various building material field, for example thermal insulating and acoustic absorption material. This paper focused on improvement of alumino-silicate binder's physical properties for wood wool ceramic board. As the result of this experiment, what we could obtain best fitted alumino-silicate binder's properties such as initial setting time, flow and compressive strength of 3 days aged, was 58min, 110% and 66.0Mpa. This result can be applicable to commercial wood wool ceramic board.

• Journal of the Korea Institute of Building Construction
• /
• v.12 no.3
• /
• pp.266-274
• /
• 2012

The annual expenditure on diesel oil and heavy oil in the construction sector is the second largest among all industrial sectors. To meet the government's greenhouse gas reduction targets, the construction sector has until 2020 to cut its emissions by 7.1%. Unlike other high-tech industrial sectors, the construction sector has a fairly limited scope for technological improvements, which hampers its capacity to achieve the reduction target. To reduce emissions, it is necessary to establish an energy and emissions strategy at the project planning stage, and energy use and the resulting emissions must be estimated. This research aims to establish an estimation methodology for greenhouse gas emissions at the planning stage of construction projects. To estimate the project-related emissions, this research indentified the relationship among the types of emissions in a cross-sectional matrix form, and then provided a set of calculation methods for total project related emissions.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.363-367
• /
• 2006

We synthesized new blue and bluish green emitting materials by using fully substituted ethylene moieties. Multi-layered EL devices were fabricated with synthesized materials and evaluated in terms of emission color and luminescence efficiency. BPBAPE[EML 4] having high $T_g$ of $155^{\circ}C$ showed luminance and power efficiency of 10.33cd/A and 4.0 lm/W without any doping agent. BTBPPA[EML 5] exhibited 5cd/A and 1.67lm/W efficiency with blue CIE value of (0.165, 0.195).

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.480-484
• /
• 2006

We propose a new PDP cell structure named DIDE (Dual Ignition Discharge Electrodes) structure with a long electrode gap to realize a high luminous efficacy. Suggested DIDE structure basically has a long electrode gap $(200{\mu}m{\sim}400{\mu}m)$, nevertheless, because of auxiliary electrodes formed on the front panel, can be driven at relatively low voltage. The discharge characteristic of DIDE structure was much different from that of conventional structure, which was analyzed by IR emission images using IICCD (Image Intensified Charge Coupled Device). The study can explain some particular characteristics of DIDE structure. As a result, the long electrode gap and low voltage effect can be expected in DIDE structure, and a very high luminous efficacy of 7.5 lm/W has been achieved in monochrome green test panel adopting the new cell structure with Ne-Xe (12%) mixture at 400 torr.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1587-1590
• /
• 2006

Through the engineering of recombination region and energy transfer in organic light emitting device, blue and red light emitting device with good color stability has been successfully obtained. A Color control layer (CCL), which emits green light through the energy transfer from the emission layers, has been introduced into the blue and red light emitting device for RGB white OLED. The RGB white OLED showed the current efficiency of 13 cd/A and the CIE coordinates of (0.33, 0.38) at $1000\;cd/m^2$. The device exhibited very stable spectrum with respect to operating current density and the CIE coordinates varied from (0.34, 0.38) to (0.31, 0.37) for $100-22000\;cd/m^2$.