• 제목/요약/키워드: Green design

검색결과 1,916건 처리시간 0.03초

경기도 북부지역 군용 사격장 토양에 존재하는 화약물질 분포 및 이동 특성 조사 (Distribution and Migration Characteristics of Explosive Compounds in Soil at Military Shooting Ranges in Gyeonggi Province)

  • 배범한;박지은
    • 한국지반환경공학회 논문집
    • /
    • 제15권6호
    • /
    • pp.17-29
    • /
    • 2014
  • 경기도 ${\bigcirc}{\bigcirc}$지역 군 사격장에서 환경으로 유출되는 화약물질 현장저감시설의 설계 자료 확보를 위해 토양오염조사를 실시하였다. 설계에 필요한 자료는 (i) 주 오염 화약물질 종류 파악, (ii) 배출/이동 경로, (iii) 토양 입경별 화약물질 농도조사 및 침강특성이다. 현장 조사 및 분석결과, TNT와 RDX가 사격장 토양에서의 주 오염물질이지만, 군 훈련 종류와 사격장 지형에 따라 오염도는 변화하였다. 화약물질은 표토이외의 심토와 인근 개울에서도 검출되어, 피탄지에서 하천으로의 유출이 있음을 확인하였다. 피탄지에 화약물질 농도가 높은 hot spot이 다수 존재하였으나, 전반적으로 오염농도가 20 mg/kg을 넘지는 않았다. 피탄지 토양 내 점토 함량은 대조군 12 %에 비해 현저히 낮은 5 % 미만이며, 이는 사격으로 인해 식피가 제거되어 강우 시 토사의 표면유출이 증가하였기 때문이라 판단된다. 토양 입경별 화약물질 분포 분석 결과, 토양 입경 0.075 mm 미만의 세립토에는 화약물질 총량의 약 10 % 이하만이 존재하였다. 침강관 실험결과, 유출수 내 액상으로 유출되는 화약물질량이 고상에 있는 화약물질량보다 많았다. 그러므로 사격장에서 표면 유출되는 강수 내 입자상 물질을 간단한 침전지로 처리하고, 다음으로 정화식물을 식재한 인공습지로 액상 내 화약물질을 처리하는 방안이 자립적이며 지속적으로 유지 가능한 녹색 정화방법이 될 것이다.

쪽 염료 니람으로부터 Comamonas sp.와 Microbacterium sp.의 분리 및 특성분석 (Isolation and Characterization of Comamonase sp. and Microbacterium sp. from Deep Blue Sediment Dye of Polygoum tinctoria, Niram)

  • 장성은;이남근;이유리;최미성;정용섭
    • KSBB Journal
    • /
    • 제28권1호
    • /
    • pp.60-64
    • /
    • 2013
  • Two strains were isolated from the traditional Deep Blue Sediment Dye of Polygoum tinctoria, Niram, and temporarily named Niram A and Niram B, respectively. The phylogenetic analysis revealed that strain Niram A and B were closely related to the members of the genus Comamonas and Microbacterium, respectively. Strain Niram A exhibited the highest 16S rRNA gene sequence similarity to C. aquatica LMG $2370^T$ (98.06%). Strain Niram B showed 100% homology with M. oxydans DSM 20578T and M. maritypicum DSM $12512^T$. The growth of the strain Niram A and B was not inhibited in Niram medium containing high calcium concentration without free sugar as carbon source. The reducing Niram is greenish. Therefore, the reducing ability on the Niram of the strains Niram A and B were determined with the color difference of the $a^*$ values of Niram fermented-fluids. The $a^*$ value indicates the level of redness (positive value) or greenness (negative value). The green color is increasing towards the negative value. In all samples fermented for 10 days, the $a^*$ values among samples were no significant difference. However, samples fermented for 15 days have an appreciable change. After fermentation for 15 days, the control Niram sample had $-3.96{\pm}0.02$ of the $a^*$ value. On the other hand, the Niram samples fermented with the strain Niram A and B showed $-4.20{\pm}0.02$ of the $a^*$ value and $-7.86{\pm}0.03$ of the $a^*$ value, respectively. In the reducing ability on the Niram, the strain Niram B was significantly better than the strain Niram A.

폴리비닐클로라이드 해양광생물반응기와 고밀도 폴리에틸렌 해양광생물반응기에서 미세조류, Tetraselmis sp. KCTC12236BP의 생산성 비교 (Comparison of Biomass Productivity of the Microalgae, Tetraselmis sp. KCTC12236BP, in Polyvinyl Chloride Marine Photobioreactor and High Density Polyethylene Marine Photobioreactor)

  • 정성균;김수권;변문섭;조용희;신동우;김지훈;임상민;이철균
    • 한국해양바이오학회지
    • /
    • 제8권1호
    • /
    • pp.18-23
    • /
    • 2016
  • It is important to design photobioreactor by cheap material for economical microalgal biomass production. In this study, two types of marine photobioreactors (MPBR), made by either polyvinyl chloride (MPBR-PVC) or high density poly ethylene (MPBR-HDPE), are used and performance of these were compared. Tetraselmis sp. KCTC 12236BP is a green marine alga that isolated from Ganghwa Island, Korea, and the strain was used for marine cultivations using MPBR-PVC and MPBR-HDPE. The cultivations were performed three times in the spring season of 2012 using MPBR-PVC and of 2013 using MPBR-HDPE in the coastal area of Young Heung Island. As the results, MPBR-PVC shows higher biomass productivities than MPBR-HDPE, due to its high light transmittance. In the cultivations using MPBR-PVC, the average sea water temperature was $11.5^{\circ}C$ during the first experiment and $16.5^{\circ}C$ during the second and third experiments. Average light intensities during three times for experiments were 407.5, 268.1 and $273.0{\mu}{\cdot}E{\cdot}m^{-2}{\cdot}s^{-1}$, respectively. The maximum fresh cell weight and average biomass productivity were $1.2g{\cdot}L^{-1}$ and $0.12g{\cdot}L^{-1}{\cdot}day^{-1}$. These results showed that Tetraselmis sp. KCTC12236BP were adapted well with the environmental conditions from ocean, and grow in the MPBR-PVC and MPBR-HDPE.

에너지성능지표(EPI)를 대상으로 한 개방형BIM기반 건축인허가 개선방향 제시 (Improvement of Open BIM-based Building Permission Process Using EPI(Energy Performance Index))

  • 김인한;김민찬;최중식
    • 한국건설관리학회논문집
    • /
    • 제16권6호
    • /
    • pp.124-135
    • /
    • 2015
  • 세계적으로 환경오염문제가 대두되면서 국내에서도 정부와 민간차원에서 친환경건축을 위한 노력이 활발히 진행 중이다. 하지만 건축물의 친환경 성능 및 친환경 관련 법규 및 기준 등에 대한 평가환경은 2차원기반의 수작업을 통한 평가로 진행되기 때문에 시간, 비용, 노동력 등이 많이 소요되며 평가의 정확성 및 효율성을 확보하기 어렵다. 따라서 본 논문에서는 개방형BIM기반으로 친환경건축 관련 인허가 업무의 개선을 목적으로 친환경건축 관련 인허가 조건 중 에너지성능지표 평가항목과 IFC포맷의 데이터와 연계를 통한 평가방안 모색하고 발생하는 문제점에 대한 대안을 제시하며 이를 반영한 평가프로그램의 활용으로 평가 프로세스를 제시함으로써 개방형BIM기반으로 에너지성능지표의 평가를 자동화하는 방안을 제시한다. 본 연구에서 제시된 방안을 친환경건축 관련 인허가 업무에 적용함으로써 업무절차의 간소화와 자동화를 통한 시간, 비용, 노동력의 절감을 기대할 수 있으며 설계변경 시 요구되는 절차가 단순화되어 업무의 생산성과 효율성이 향상되며 검토과정과 결과 값의 투명성과 검토의 정확성과 신뢰도를 확보 할 수 있을 것으로 기대한다.

초저온 냉각튜브 내 수소기체의 액체수소로의 상변환 분석 (Analysis of Gas-to-Liquid Phase Transformation of Hydrogen in Cryogenic Cooling Tube)

  • 이대원;홍하이응우엔;소명기;나인욱;박동화;김교선
    • Korean Chemical Engineering Research
    • /
    • 제56권1호
    • /
    • pp.49-55
    • /
    • 2018
  • 에너지 위기 시대를 맞이하여 수소에너지가 가장 가능성 있는 대체에너지 중의 하나로 고려되고 있다. 액체수소는 기체수소와 비교하여 단위 부피당 에너지 밀도가 월등히 높으며 수소에너지의 탁월한 저장 방법으로 간주되고 있다. 본 연구에서는 2 상 모델에 기초를 둔 Navier-Stokes 식을 전산유체역학 프로그램을 이용하여 풀었으며, 초저온 냉각 튜브를 통과하면서 기체수소가 액화되는 과정을 분석하였다. 열전도율이 높은 구리관을 초저온 냉각을 위한 관의 재질로 가정하였다. 기체수소의 유입속도를 5 cm/s, 10 cm/s, 20 cm/s로 변화시키면서 냉각튜브 내 유체 온도분포, 축방향 및 반경방향 유체 속도, 기체 및 액체 수소 부피분율 분포를 각각 분석하였다. 본 연구 결과는 향후 액체수소 제조를 위한 기체수소 초저온 냉각기의 설계 및 제작을 위한 기초자료로 활용이 될 것으로 기대된다.

소형 계수용 및 영상용 감마프로브 시스템의 설계와 성능평가 (Design and Performance Evaluation of Small Size Counting and Imaging Gamma Probe System)

  • 양묘근;곽철은;심용걸;김희중;최용;정준기;이명철;고창순
    • 대한의용생체공학회:의공학회지
    • /
    • 제18권3호
    • /
    • pp.291-299
    • /
    • 1997
  • As a microimaging device detecting gamma rays emitted from small lesions or tumors during operation, the intraoperative surgical probe has been proposed and is now under development. We have designed a multipurpose portable gamma prove system and evaluated the performance both for the absolute counting purpose of residual radioactivities and for the localizing capability of gamma events using the NaI(Tl) crystal and two types of photomultiplier tubes(PMTs). Counting efficiencies in the range of routine clinical use of radiation dose were measured using the assembly of single channel PMTs and 0.5 inch thick NaI(Tl) crystal of 1 inch diameter. The positioning of gamma events for imaging purpose requires the multiple channel PMTs with appropriate positioning electronics. We have designed a simple and reliable positioning circuit based on the concept of modified Anger. In preliminary experiments using the multiple channel PMT of 3 inch diameter and the dim lighth source, we were able to trace and localize the correct position with reduced positioning error by the use of two multiplier/divider chipset and simplified peripherals. The energy resolutions for the counting gamma probe measured as full width at half maximum(FWHM) for Cs-137, F-18, Tc-99m were 12%, 13%, and 36%, respectively. The spatial resolution for the imaging gamma probe measured as FWHM for green LED was 2.9 mm. The results indicate that the currently developing probe is very promising and could be very useful for many applications in nuclear medicine. Future studies will include developing collimators, improving interface hardwares, and evaluating the system with clinical data.

  • PDF

온실 환경 데이터의 효과적인 모바일 모니터링 시스템 구현 (Implementation of Efficient Mobile Monitoring System of the GreenHouse Environment Data)

  • 서정희;박흥복
    • 한국정보통신학회논문지
    • /
    • 제13권3호
    • /
    • pp.572-579
    • /
    • 2009
  • 모니터링 시스템은 데이터 모니터링을 위한 장치들의 증가와 다양한 서비스를 지원하기 위해 많은 파라메타를 요구한다. 특히 무선 모바일 환경에서 장치의 상태 모니터링은 제한된 스크린 사이즈에 다량의 정보를 디스플레이 해야 하는 어려움과 네트워크상에 장치 상태 데이터의 전송은 네트워크 트래픽과 많은 관련을 가진다. 본 논문은 온실 환경 시스템의 효과적인 관리를 위하여 데이터 수집을 위한 컨트롤 보드를 설계하고, 무선 모바일과 웹 기반의 다중 인터페이스를 구현하여 장치, 그리고 환경 데이터 모니터링, 각 장치의 제어를 적응적으로 수행하는데 있다. 그러므로 사용자의 상황에 따른 효율적인 모니터링 및 제어를 위해서 분산 클라이언트가 컴퓨터인 경우는 서버 또는 지역 제어 모듈에 LabVIEW 웹 서버를 통해서 웹브라우저로 모니터링 및 제어권을 획득하고, 클라이언트가 PDA인 경우는 디스플레이의 크기와 데이터 처리 능력을 고려한 무선 모바일의 어플리케이션을 연동하였다. 실험결과, 사용자의 환경에 따른 적응성과 이동성을 제공함으로써 인간 중심적인 설계 관점에서 만족할만한 결과를 확인할 수 있었다.

책임형 CM사 경쟁력 확보 및 선진화를 위한 미국 건설사의 시공이전단계 서비스 벤치마킹 연구 (Benchmarking of US General Contractor's Pre-construction Services for a CM at Risk Project to Improve Contractor's Competitiveness)

  • 이창재;이상효;안용한
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제21권3호
    • /
    • pp.9-18
    • /
    • 2017
  • 책임형 CM(CM at Risk)은 CM회사가 최대공사비보증을 통해 프로젝트를 제공하는 프로젝트 발주 방식 중 하나이다. 종합건설업체는 리스크를 줄이고 프로젝트의 성과를 향상시키기 위해 초기 설계 단계부터 시공단계까지 책임형 CM을 적용할 수 있다. 책임형 CM의 주요 장점 중 하나는 종합건설업체가 견적, 도면 및 시방서 검토, 시공성 검토, 가치공학, 친환경, BIM 등을 포함하는 포괄적인 시공이전단계의 서비스를 제공한다는 것이다. 그러나 국내에서는 책임형 CM 프로젝트가 거의 수행되지 않아 경험이 부족한 국내 종합건설업체는 현재 한정적인 시공이전단계 서비스만을 제공하고 있다. 본 연구에서는 해외 선진 종합건설업체는 프로젝트에서 책임형 CM을 어떻게 활용하고 있는지, 특히 시공이전단계 프로세스와 그에 대한 목적, 성공적인 수행을 위한 각 참여자들의 역할과 책임에 대해 벤치마킹 연구를 통해 중요한 정보를 제공한다. 이를 통해, 건설 사업 경쟁력을 높이기 위해 책임형 CM을 프로젝트에 도입하려는 국내 건설업체들에게 가이드 자료로 활용될 수 있을 것이다.

Color Change and Consumer Preferences towards Color of Heat-Treated Korean White Pine and Royal Paulownia Woods

  • Hidayat, Wahyu;Qi, Yue;Jang, Jae Hyuk;Park, Byung Ho;Banuwa, Irwan Sukri;Febrianto, Fauzi;Kim, Nam Hun
    • Journal of the Korean Wood Science and Technology
    • /
    • 제45권2호
    • /
    • pp.213-222
    • /
    • 2017
  • Heat treatment of wood is an attractive alternative environmentally-friendly treatment to add value of less valuable woods by improving color, dimensional stability, and natural durability. To improve the color properties of Korean white pine (Pinus koraiensis) and royal paulownia (Pauwlonia tomentosa), we treated the woods at $160^{\circ}C$, $180^{\circ}C$, $200^{\circ}C$, and $220^{\circ}C$ for 2 hours. Color change after heat treatment was evaluated using the CIE-Lab color system and survey was conducted to determine the consumer preferences towards color of heat-treated wood. Lightness ($L^*$) decreased with increasing temperature and the higher degree of change was obtained in royal paulownia. The red/green chromaticity ($a^*$) in both wood decreased after heat treatment at $160^{\circ}C$, and constantly increased after heat treatment at $180^{\circ}C$ to $220^{\circ}C$. Yellow/blue chromaticity ($b^*$) in Korean white pine tended to increase after heat treatment at $160^{\circ}C$, then decreased gradually afterwards. In royal paulownia, $b^*$ values linearly increased with increasing temperature. Overall color change (${\Delta}E^*$) increased with increasing temperature with higher degree obtained in royal paulownia. Samples with the clamps in both wood species showed lower degree of the change in $L^*$, $a^*$, b and ${\Delta}E^*$. The results of the consumer preferences test showed that the darker colors of heat-treated woods were more preferred by consumers compared to the lighter colors of untreated woods. Consequently, heat treatment could enhance the color properties of Korean white pine and royal paulownia woods for value added products.

다차원척도법(MDS)을 활용한 지하철 역세권과 TOD계획요소의 연관성에 따른 유형분류 (The Classification according to the Correlation between TOD Planning Factors and the Seoul Metropolitan Subway Influential Area by Using MDS Analysis)

  • 김성은;원유호
    • 토지주택연구
    • /
    • 제4권2호
    • /
    • pp.167-176
    • /
    • 2013
  • 최근 뉴어바니즘으로 기원된 압축복합도시개발, 대중교통지향개발(TOD)이 국내에서도 역시 트렌드로 자리잡고 있다. 이러한 새로운 도시개발의 패러다임은 기존의 자동차를 이용한 도시공간구조를 대중교통 중심으로 변화시키고 있다. 또한 녹색성장과 에너지절약 등의 친환경효과를 가지는 대중 교통지향형 개발은 지속가능성으로 각광받고 있다. 이렇듯 국내 대표적인 대도시 서울도 역시 대중교통을 중심으로 역세권 개발이 활성화 되고 있으나, 이에 대한 영향요인에 대한 실증연구는 미흡한 실정이다. 따라서 본 연구는 대도시의 광범위한 접근성을 고려하여 역세권을 기존보다 광범위하게 1km로 설정하고 토지이용 연면적, 접근성, 복합성, 도시설계요소 등의 세부지표를 요인분석을 통해 7개로 통합 및 유형화 하였다. 또한 다차원척도법을 이용하여 통합 유형화한 요인과 지하철 역세권의 연관성에 근거해 유형을 구분해본 결과 (1)'대중교통의 국지적 접근성', (2)'주변개발 수준','보행친화형 환승시설', (3)'대중교통의 광역적 접근성', (4)'중심지 토지이용용도', '역세권의 복합적 이용', '대중교통의 상호보완'과 같은 구분으로 4가지 차원으로 201개의 지하철역이 각 요인과 연관성을 나타내며 구분되었다.