• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.26 no.1
• /
• pp.24-39
• /
• 2000

Various methods and graft materials have been used to fill in the defect adjacent to the implants and considered as clinically acceptable. But it is not clear whether the regenerated bone increases the implant-bone contact and supports the implant. The purpose of this study is to evaluate regenerated bone surrounding implants using bone morphogenetic protein(BMP) and demineralized freeze-dried bone(DFDB), and the interfaces between implants and regenerated bone. bBMP was extracted and partially purified from the bovine bone matrix using heparine chromatography. Demineralized freeze-dried bone was made from the dog. Inactive insoluble collagenous bone matrix(IBM) of dog was used as carrier of bBMP. Interfaces of titanium coated epoxy resin implants were processed for demineralized section for transmission electron microscopy(TEM) and those of screw type implants were for nondemineralized section for light and fluoromicroscopic examination. Implants were inserted in the inferior border of mandible of adult dogs and artificial bony defects($3{\times}3{\times}4mm$) were made at the mesial and distal side of implants. Defects were filled with BMP(BMP group) and DFDB(DFDB group). For the fluoromicroscopic examination, the fluorescent dyes(oxytetracycline, calcein green, alizarin red) were injected 2, 4, 6, 8, 12 weeks after implantation. The experimental animals were sacrificed at the 6th and the 12th week and their mandible were extirpated and processed for examination with light microscopy, fluoromicroscopy and TEM. The obtained results were as follows : 1. By the light microscopic findings, the defects were filled with woven bone at the 6th week and compact bone at the 12th week, and the osseointegrations were seen in both groups. There was no histological difference between them. 2. On the basis of the histomorphometric analysis, BMP group(6th week: 40.25%, 12th week: 56.04%) had higher bony contact ratio than DFDB group(38.37%, 42.63%). There was significant difference between two groups at the 12th week(p<0.05). 3. The amount of bone formation in BMP group was more prominent than in DFDB group. Significant difference was noted among two groups at the 6th and the 8th week(p<0.05). 4. By the transmission electron microscopic findings, $0.4-2{\mu}m$ soft tissue layer was found in adjacent to the interfaces and over the collagen fibrils of bone at the 6th week. However, about 100nm amorphous layer was noted at the interface or collagen fibrils directly extended to the titanium surface at the 12th week. There was no significant difference between two groups. 5. These results suggest that BMP and DFDB can be used as good graft materials in the regeneration of bone adjacent to implant, and BMP is more valuable as a bone inducer than DFDB.

• Korean Journal of Plant Resources
• /
• v.12 no.2
• /
• pp.107-119
• /
• 1999

In this study, the induction regeneration of callus from immature embryo in trifoliata orange (Poncirus trifoliata RAFIN.) were accomplished. The embryogenic calli were induced from the immature embryo derived from seed when the calli were irradiated for 16hr at about 2,000 Lux in $\frac{1}{2}$ MS medium supplemented with 3% sucrose, and 44.4$\mu$M BA. Regeneration to whole plants was the most successful in MS medium containing 5.0$\mu$M BA. The yellowish callus was developed at 2 to 3 weeks of culture and the callus was changed from yellow to green at 5 to 6 weeks culture. In vitro regeneration was directly induced from embryogenic callus in MS medium containing 3% sucrose and 5.0$\mu$M BA. Multishoot was formed at 16 weeks culture. Moreover, when the root-formed plantlet was transplanted to soil, they grew to a whole plant. The compact cultured-cells were observed by light microscope after 4 weeks of cultivation and the embryogenic clumps were formed about the 5 weeks. At the same time, the neighboring cells were liquefied. In addition, differentiation of leaf and stem from the callus was observed after 12 weeks. The developed oil sacs and the profacicular cambium of the immature leaf were observed after 18 weeks. Therefore, we can see the considerable changes of cell arrangements according to the developmental stages of calli from trifoliata orange.

• Journal of Bio-Environment Control
• /
• v.17 no.4
• /
• pp.283-287
• /
• 2008

To investigate the effects of different wavelengths of photosynthetically active radiation on the morphology and leaf color changes of a single tomato (Lycopersicon esculentum) seedling, we stored the seedling at $10{\pm}0.5^{\circ}C$ under eight different wavelengths (peak wavelengths; 405, 450, 505, 545, 600, 645, 680, and 700 nm) with a constant photosynthetic photon flux of $3{\mu}mol\;m^{-2}s^{-l}$ for 28 d. Under the 405, 450, and 505 nm wavelength conditions, the leaves of the seedlings showed vigorous shape with an upright morphology. Rachis elongation was suppressed and hence compact appearance was observed under the 450 and 505 urn conditions. Although the difference in leaf color between before storage and on 28 days after storage was observed under all wavelength conditions, the 405 and 700 um irradiations changed the leaf color to light green. Application of light-emitting diode (LED) light irradiated from around 450 to 545 nm can contribute to vigorous shape with an upright morphology of tomato seedlings during low light irradiation-low temperature storage.

• Land and Housing Review
• /
• v.4 no.2
• /
• pp.167-176
• /
• 2013

The City Complex Development and TOD originated from the Compact City are entrenched domestically. The New Urban Development such as these changes Structure of Urban space from the Automobile to the Public Transportation. Also, Transit-Oriented Development is drawing attention as sustainability because it has effects of Environment as Green growth. However, An empirical Study is insufficient about Influence Factors of Transit Oriented Development. Therefore This study sets up the Density spaced 1000m apart of Transit Oriented than the existing and did 7 Types considered of Accessibility, Complexity and Design Element according to the Factorial analysis. As a result, this study drew that (1) 'intraregional accessibility of public transit', (2) 'degree of development', 'pedestrian-friendly facility', (3) 'interzonal accessibility of public transit', (4) 'land-use of the city centre', 'complex using of rail station area', 'complementary public transit' are related 201 in number of the Subway stations according to the Multi-dimensional scaling.

• Journal of the HCI Society of Korea
• /
• v.14 no.2
• /
• pp.41-47
• /
• 2019

In this study, a smart assistive device is designed to recognize pedestrian signal and to provide audio instructions for visually impaired people in crossing streets safely. Walking alone is one of the biggest challenges to the visually impaired and it deteriorates their life quality. The proposed device has a camera attached on a pair of glasses which can detect traffic lights, recognize pedestrian signals in real-time using a machine learning algorithm on GPU board and provide audio instructions to the user. For the portability, the dimension of the device is designed to be compact and light but with sufficient battery life. The embedded processor of device is wired to the small camera which is attached on a pair of glasses. Also, on inner part of the leg of the glasses, a bone-conduction speaker is installed which can give audio instructions without blocking external sounds for safety reason. The performance of the proposed device was validated with experiments and it showed 87.0% recall and 100% precision for detecting pedestrian green light, and 94.4% recall and 97.1% precision for detecting pedestrian red light.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_1
• /
• pp.1029-1042
• /
• 2021

As part of the next-generation Compact Advanced Satellite 500 (CAS500) project, CAS500-4 is scheduled to be launched in 2025 focusing on the remote sensing of agriculture and forestry. To obtain quantitative information on vegetation from satellite images, it is necessary to acquire surface reflectance through atmospheric correction. Thus, it is essential to develop an atmospheric correction method suitable for CAS500-4. Since the absorption and scattering characteristics in the atmosphere vary depending on the wavelength, it is needed to analyze the sensitivity of atmospheric correction parameters such as aerosol optical depth (AOD) and water vapor (WV) considering the wavelengths of CAS500-4. In addition, as CAS500-4 has only five channels (blue, green, red, red edge, and near-infrared), making it difficult to directly calculate key parameters for atmospheric correction, external parameter data should be used. Therefore, thisstudy performed a sensitivity analysis of the key parameters (AOD, WV, and O₃) using the simulated images based on Sentinel-2 satellite data, which has similar wavelength specifications to CAS500-4, and examined the possibility of using the products of GEO-KOMPSAT-2A (GK2A) as atmospheric parameters. The sensitivity analysisshowed that AOD wasthe most important parameter with greater sensitivity in visible channels than in the near-infrared region. In particular, since AOD change of 20% causes about a 100% error rate in the blue channel surface reflectance in forests, a highly reliable AOD is needed to obtain accurate surface reflectance. The atmospherically corrected surface reflectance based on the GK2A AOD and WV was compared with the Sentinel-2 L2A reflectance data through the separability index of the known land cover pixels. The result showed that two corrected surface reflectance had similar Seperability index (SI) values, the atmospheric corrected surface reflectance based on the GK2A AOD showed higher SI than the Sentinel-2 L2A reflectance data in short-wavelength channels. Thus, it is judged that the parameters provided by GK2A can be fully utilized for atmospheric correction of the CAS500-4. The research findings will provide a basis for atmospheric correction of the CAS500-4 in the future.

• Journal of Bio-Environment Control
• /
• v.20 no.4
• /
• pp.352-356
• /
• 2011

It is true that the industrial development has usually been accompanied with urbanization or centralization of population that has inevitably led to high-rise buildings and densely built-up living area in the cities. While it is badly needed to acquire as much green land within the city limits as possible to compensate for reduced space for recreational purpose in parallel with increasingly urbanized area, the living conditions of plants have become seriously devastated due to shortage of sun light walled-off by high-rise buildings and contaminated environment and air. The shade that is generated by high-rise and compact buildings hinders growth of plants, which makes it urgent to develop native ground cover plant that is strongly viable in the shade. For this purpose, Ligularia stenocephala, best known as greens for Ssam (rice and condiments wrapped in leaves) was cultivated under the 30%, 50%, and 80% shadings and observed to see if there would be any changes in soil conditions, growth of plants and chlorophyll contents depending on the shading rate. The leaf number was 10.8 pieces under the 50% shading and 8.4 under the 30%-shading, 7.7 pieces more than that cultivated under lighting. The leaf width turned out to be excellent from cultivation under the 50%- shading, an evidence indicating its possibility of being cultivated as native ground cover plant in the shade. The live weight of the plants cultivated under the shading increased to 31.63 g, 43.39 g and 19.40 g, respectively, compared to 90.43 g of those in the untreated control plot. The increase in growth of roots was particularly significant with 48.48 g in comparison to 12.33 g under 30% shading cultivation. The chlorophyll synthesis amounted to 46.2 under the 50% shading, showing an increase compared to 41.9 under lighting. The chlorophyll synthesis rather shrank under other shading conditions. The cultivation of Ligularia stenocephala under the 50% shading showed the best condition in growth as native ground cover plant.

• Korean Journal of Breeding Science
• /
• v.41 no.4
• /
• pp.630-634
• /
• 2009

"Hyedang", a new covered cultivar derived from the crosses between "Suwon300" and "Haganemugi//CI08397/Haganemugi" developed at the Honam Agricultural Research Institute (HARI), NICS, RDA in 2007. The origin of "Hyedang" is "Iksan 407" (SB951033-B-B-B-72). The initial cross was made in 1995 and the selected line showed a high yield and good quality characteristics under yield trial test in 2004. "Iksan407" consistently performed well for three years (2005-2007) from the four locations of regional yield trial (RYT) in Korea and released as "Hyedang". The characteristics of "Hyedang" were the following: rate III growth habit, green leaf and stem, compact spike and with long rough awns. The heading date was April 25 in upland and April 17 in paddy field, which was 2 and 3 days earlier than that of check cultivar, "Olbori". The culm length was 80 cm which was 8 cm shorter than those of check cultivar. It showed spike length of 4.3 cm and 696 spikes per $m^2$, 51 grains per spike, 35.0 g of 1,000 grain weight and 704 g of test weight. It showed stronger winter hardiness and higher resistance to barley yellow mosaic virus (BaYMV) than those with check cultivar. It showed similar protein content and higher whiteness than those of the check cultivar and diastatic power was higher than that of Olbori. The average yield of the pearled grain in the RYT was $4.17ton\;ha^{-1}$ in upland and $4.27ton\;ha^{-1}$ in paddy field, which was 23% and 9% higher than that of the check cultivar, respectively. This cultivar would be suitable for the area above the daily minimum mean temperature of $-8^{\circ}C$ in January in Korean peninsula.