• Applied Chemistry for Engineering
• /
• v.22 no.6
• /
• pp.594-598
• /
• 2011

We study on the preparation of green emitting materials for organic light emitting device. 3-chromonealdehyde derivatives possessing a conjugated structure, which were composed of electron acceptor of 3-chromonealdehydes and electron donor of diamines, were synthesized by dehydration-condensation process. The structural properties of reaction products were analyzed FT-IR and $^1H-NMR$ spectroscopy. The thermal stabilities and reactivities were measured by melting points and yields. The UV-visibles and PL properties can be determined by excitation spectra and emission spectra, respectively.

• Journal of the Microelectronics and Packaging Society
• /
• v.13 no.1 s.38
• /
• pp.51-55
• /
• 2006

The green emitting high performance OLEDs using the $Alq_3$-C545T fluorescent system have been fabricated and characterized. In the device fabrication, 2-TNATA [4,4',4'-tris(2-naphthylphenyl-phenylamino)-triphenylamine] as a hole injection material and NPB [N,N'-bis(1-naphthyl)-N,N'-diphenyl-1,1'-biphenyl-4,4'-diamine] as a hole transport material were deposited on the ITO(indium thin oxide)/glass substrate by vacuum evaporation. And then, green color emission layer was deposited using $Alq_3$ as a host material and C-545T[10-(2-benzothiazolyl)-1,1,7,7- tetramethyl-2,3,6,7-tetrahydro-1H,5H,11H-[1]/benzopyrano[6,7,8-ij]-quinolizin-11-one] as a dopant. Finally, small molecule OLEDs with structure of ITO/2-TNATA/NPB/$Alq_3$:C545T/$Alq_3$/LiF/Al were obtained by in-situ deposition of $Alq_3$, LiF and Al as the electron transport material, electron injection material and cathode, respectively. Green OLEDs fabricated in our experiments showed the color coordinate of CIE(0.29, 0.65) and the maximum power efficiency of 7.3 lm/W at 12 V with the peak emission wavelength of 521 nm.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.181-185
• /
• 2006

The flexible 2-inch AMOLED with $176{\times}144$ pixels has been demonstrated using top emission OLED driven by organic thin film transistors (OTFTs). For the development of AMOLED display on plastic substrate, we have developed several integration and unit process technologies. Through the optimization of the process based on plastic substrate, OTFT backplane with 2 transistors and 1 capacitor in a pixel has been fabricated and integrated with top emission OLED. The active addressing by OTFT driving circuit has been achieved and green light with 15 $cd/m^2$ at 15V has been observed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1511-1514
• /
• 2009

Organic light emitting layer in OLED device was formed by gravure printing process in this work. Organic surface coated by gravure printing typically showed relatively bad uniformity. Thickness and roughness control was characterized by applying various mixed solvents in this work. Poly (N-vinyl carbazole) (PVK) and fact-tris(2-phenylpyridine)iridium($Ir(ppy)_3$) are host dopant system materials. PVK was used as a host and Ir(ppy)3 as green-emitting dopant. To luminance efficiency of the plasma treatment on etched ITO glass and then PEDOT:PSS spin coated. The device layer structure of OLED devices is as follow Glass/ITO/PEDOT:PSS/PVK+Ir(ppy)3-Active layer /LiF/Al. It was printed by gravure printing technology for polymer light emitting diode (PLED). To control the thickness multi-printing technique was applied. As the number of the printing was increased the thickness enhancement was increased. To control the roughness of organic layer film, thermal annealing process was applied. The annealing temperature was varied from room temperature, $40^{\circ}C$, $80^{\circ}C$, to $120^{\circ}C$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.11
• /
• pp.943-949
• /
• 2000

In this paper, the single and double heterostructure organic light-emitting devices(OLEDs) were fabricated. The single heterostructure OLED(TYPE 1) is consisted of TPD as a HTL(hole transfer layer) and Alq$_3$as an EML(emitting layer). The double heterostructure OLED(TYPE 2) is consisted of TPD as a HTL, Alq$_3$as an EML and PBD as an ETL(electron transfer layer). The another double heterostructure OLED(TYPE 3) is consisted of TPD as a HTL, PBD as an EML and Alq$_3$as an ETL. We obtained a strong green emission device with maximum EL emission wavelength 500nm in TYPE 3. When the applied voltage was 12V, the emission luminescence was 120.9cd/㎡. The chromaticity index of TYPE 3 was x=0.29, y=0.50. In the characteristic plot of current-voltage, TYPE 3 device was turned on at 6.9V. This voltage was a fairly low turn-on voltage. TYPE 1 and 2 device were turned on at 10V and 8.9V respectively. These types showed no good properties over that of TYPE 3.

• Journal of IKEEE
• /
• v.28 no.3
• /
• pp.329-336
• /
• 2024

Organic light emitting diode(OLED) is distributed in layers with different refractive index, which leads to total internal reflection and low light extraction efficiency. As a result, light extraction technologies have been investigated that include structures such as MLA. However, technologies such as MLA are using petroleum-based polymers, which cause environmental problems during disposal. Therefore, this study investigates the use of eco-friendly polymers hydroxyethyl cellulose(HEC) and tannic acid(TA) to produce external light extraction films. HEC is biodegradable and has high transparency, making it suitable for eco-friend external light extraction films. The TA used as an additive is a polyphenolic molecule, which is expected to form strong hydrogen bonds with HEC. In addition, TA can protect OLED from damage by UV light through its phenolic groups. HECTA MLA films were produced by dissolving HEC and TA in water without using additional solvents and then imprinting them on MLA mould. When the HECTA MLA film was attached to the outside of the OLED and analysed, it showed a high Haze of more than 80%, and the external quantum efficiency and current efficiency of the OLED were improved by 38% and 39%, respectively, compared to the reference.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1587-1590
• /
• 2006

Through the engineering of recombination region and energy transfer in organic light emitting device, blue and red light emitting device with good color stability has been successfully obtained. A Color control layer (CCL), which emits green light through the energy transfer from the emission layers, has been introduced into the blue and red light emitting device for RGB white OLED. The RGB white OLED showed the current efficiency of 13 cd/A and the CIE coordinates of (0.33, 0.38) at $1000\;cd/m^2$. The device exhibited very stable spectrum with respect to operating current density and the CIE coordinates varied from (0.34, 0.38) to (0.31, 0.37) for $100-22000\;cd/m^2$.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.1
• /
• pp.15-21
• /
• 2012

In this study, the characteristics of the 2-wavelength white organic light-emitting diod (WOLED) with two colors of yellow and blue were compared and analyzed with 3-wavelength WOLED with three colors of red, green, and blue. The results indicated that the power efficiency of the 2-wavelength WOLED was 1.6 times higher than 3-wavelength WOLED. In addition, the colot coordinate of the 2-wavelenth WOLED which was (0.34, 0.39) was found closer to the optimal color coordinate for the white-lighting application when compared with that of the 3-wavelength WOLED.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.431-434
• /
• 2007

Rapid progress has been made in the development of commercially viable Light Emitting Polymer (LEP) materials for display and lighting applications. This presentation will focus on: ${\bullet}$ Degradation studies that have led to the design of new and improved materials ${\bullet}$ Recent lifetime and efficiency results for red, green, blue, and white polymers ${\bullet}$ Challenges of formulating inks that can be used in a production environment

• Ceramist
• /
• v.21 no.1
• /
• pp.55-63
• /
• 2018

Recently, display technology has been focused in regard with with color reproduction, contrast ratio, image resolution and color bit. Among these technologies, the color reproducibliity of White, Red, Green, and Blue is associated with the TV plaform and is expressed as a major technology. Major TV platforms are divided into three categories since 2015, including LCD-based phosphor coverted LED BLU technology, QD sheet technology using nano-sized quantum dots, and OLED technology. In this paper, we describe the color reproducibility definition and background, luminescent materials with wide color gamut, color reproducibility of TV display performance, and discuss about next luminescent materials.