• 환경기술인
• /
• 통권54호
• /
• pp.40-41
• /
• 1991

• 폴리머
• /
• 제37권4호
• /
• pp.518-525
• /
• 2013

폴리프로필렌(PP)을 매트릭스로, 황산처리된 녹조류(SGA)를 보강재로 사용한 바이오복합재료(biocomposites)의 기계적 특성을 향상시키기 위해 그래핀(GNP)의 평균입자크기와 첨가량에 따른 SGA/GNP/PP 복합재료를 제조하고 그 특성을 분석하였다. GNP의 첨가량에 의해 굴곡강도 및 충격강도는 점차 감소하는 경향을 나타내었다. 반면에, SGA와 GNP의 영향으로 인해 굴곡탄성률 및 저장탄성률은 크게 증가하였다. 평균입자크기가 $5{\mu}m$(GNP5)인 크기가 작은 GNP를 보강재로 사용하였을 경우 평균입자크기가 $15{\mu}m$(GNP15)인 GNP를 보강재로 사용한 복합재료와 비교하여 상대적으로 우수한 기계적 특성을 보였다. 이는 상대적으로 GNP5의 효과적인 분산에 기인한 것이다. 반면에, GNP5를 보강재로 사용한 복합재료의 열팽창에 대한 저항 특성은 GNP15와 비교하여 상대적으로 감소한 결과를 나타내었으며, 이는 열전도 특성이 우수한 GNP5가 상대적으로 넓고 고르게 분포되어있기 때문에 복합재료 전체에 열이 쉽게 전달되었기 때문으로 해석할 수 있었다. 결과적으로 SGA/GNP/PP 복합소재는 굴곡저항, 저장탄성률, 댐핑특성 등은 충분히 향상되어 범용 바이오컴포지트로 적용가능하였다.

• 한국환경과학회지
• /
• 제6권3호
• /
• pp.195-203
• /
• 1997

Pusan has experienced some different paths of urbanization and industrialization compared to other cities. and has faced the problem of over-saturation In enoronmental capacity. Pusan needs to fond out sustainable development strategies based on Agenda 21 by UNCED In 1992 to secure urban renewal. Therefore. Pusan's sustainable development strategies focus on the 1)research on envlronmental capacity and reasonable population accommodation 2)supp1y of basic enoronmental facilities for the human settlement 3)protection and efficient management of environmental pollution 4)saving and control of energy and other resources S)independent and stable euecution of plan based on biological relation 6)harmony between nature and urban spatial organization. In addition. these policies can be suggested along with the conclusions; First, ostablishment of green plan-muddle and long term environmental goals Included In the urban planning to reduce enoronmental deterioration and pollution. Second, computation of sustalnability Indeu the Index Is necessary to sustainable urban development, which is related with green GNP of the national level. Third, capacity estimation of nature and social environment-estimation of enoronmental capacity to the civilized area is required become an ecopolis, and is required to focus on the western area of Pusan which has high decree of potentiality.

• 전기화학회지
• /
• 제10권1호
• /
• pp.7-13
• /
• 2007

Glycine Nitrate Process(GNP)를 이용하여 $La_{0.75}Sr_{0.25}FeO_3$를 합성하였다. 이때, GNP의 글리신의 함량은 화학양론식으로 계산하여 3.17mol을 첨가하였다. ICP-AES분석으로 각각의 조성 함량을 조사하고, XRD, SEM분석으로 합성된 분말의 결정성과 입자크기를 분석하였다. 이렇게 분석한 분말은 일축가압 성형으로 펠렛을 제조하였으며, 이 시편은 $1200^{\circ}C$에서 소결하였다. 소결된 시편은 아르키메데스 법을 이용하여 소결밀도를 측정히였다. 전기화학적 성능을 평가하기 위해 AC impedance spectroscopy로 측정하였으며, GNP 법으로 합성된 LSF가 기존의 LSM 보다 낮은 Ohmic resistance및 Polarization resistance를 보임을 확인하였다. 또한 합성된 LSF를 양극으로 사용하여 연료극 지지체식 고체산화물 연료전지의 단위전지를 제작하였으며, 그 성능은 $750^{\circ}C$에서 $342mW/cm^2(0.7V,\;488mA/cm^2)$을 나타내었다. 마지막으로 임피던스 분석에 의하여 단위전지의 전기화학적 분극저항을 평가하였다.

• 한국재료학회지
• /
• 제9권1호
• /
• pp.51-56
• /
• 1999

The $BaTiO_3$ powders were synthesized by GNP (Glycine-Nitrate process). The powders were prepared using carbonate and alkoxide as starting materials and nitric acid was used as a solvent for starting materials as well as an oxidant for combustion. the effects of aggregates in $BaTiO_3$ powders on green densities, sintering and dielectric characteristics were investigated. When the glycine/cation molar ratio was 1.2, reactivity of self-combustion was most intensive and the degree of aggregates after calcination was low. On sintering at $1400^{\circ}C$, maximum theoretical relative density(94.99%%0 was obtained in case of 1.2 molar ratio of glycine/cation. The dielectric constant of this sintered $BaTiO_3$ was 1919.

• Corrosion Science and Technology
• /
• 제10권2호
• /
• pp.52-59
• /
• 2011

Corrosion of metallic materials occurs by the reaction with corrosive environment such as atmosphere, marine, soil, urban, high temperature etc. In general, reduction of thickness and cracking and degradation are resulted from corrosion. Corrosion in all industrial facilities and infrastructure causes large economic losses as well as a large number of accidents. Economic loss by corrosion has been reported to be nearly 1-6% of GNP or GDP. In order to reduce corrosion damage of industrial facilities, corrosion map as well as a systematic investigation of the loss of corrosion in each industrial sector is needed. The Corrosion Science Society of Korea in collaboration with 15 universities and institutes has started to survey on the cost of corrosion and corrosion map of Korea since 2005. This work presents the results of the survey on cost of corrosion by Uhlig, Hoar, and input-output methods, and the evaluation of atmospheric corrosion rate of carbon steel, weathering steel, galvanized steel, copper, and aluminum in Korea. The total corrosion cost was estimated in terms of the percentage of the GDP of industry sectors and the total GDP of Korea. According to the result of Input/output method, corrosion cost of Korea was calculated as 2.9% to GDP (2005). Time of wetness was shown to be categories 3 to 4 in all exposure areas. A definite seasonal difference was observed in Korea. In summer and fall, time of wetness was higher than in other seasons. Because of short exposure period (12 months), significant corrosion trends depending upon materials and exposure corrosion environments were not revealed even though increased mass loss and decreased corrosion rate by exposure time.

• 한국자원식물학회지
• /
• 제36권3호
• /
• pp.225-236
• /
• 2023

Stomatal traits such as stomata density (SD), aperture length (APL) and width (APW), guard cell length (GCL) and width (GCW), and distance between stomata (DIS) were investigated to identify correlation with agronomic traits for 35 Korean wheat cultivars. Flag leaf width (FLW) of Korean wheat cultivars was the widest in Ol-mil, and the narrowest in Keumkang. SD tended to be higher on the adaxial side than on the abaxial side in Korean wheat cultivars. SD of adaxial and abaxial sides was classified into a cultivar with a significantly different or not. In APL, 18 wheat cultivars showed significant differences according to leaf side, and APL of adaxial was longer than APL of abaxial in 13 wheat cultivars. In APW, 15 wheat cultivars showed a significant difference, and APW of abaxial was wider than APW of adaxial among them. In GCL, 14 wheat cultivars showed a significant difference, and the GCL of abaxial was longer than the GCL of adaxial in 10 wheat cultivars. In GCW, 10 wheat cultivars showed a significant difference, GCW of adaxial was wider than GCW of abaxial and in 6 wheat cultivars. FLW of adaxial and abaxial showed a negative correlation with GCL and a positive correlation with grain number per panicle. FLW of only abaxial showed a positive correlation with DIS. The SD of the adaxial showed a negative correlation with GCL, while the SD of the abaxial showed a negative correlation with APL. APL of both sides of the leaf showed a positive correlation with GCL, and APW of only abaxial showed a negative correlation with GLC. DIS of adaxial showed a negative correlation with tiller number (TN), while DIS of abaxial showed a positive correlation with GNP.

• 한국수소및신에너지학회논문집
• /
• 제24권1호
• /
• pp.29-35
• /
• 2013

A dense mixed ionic and electronic conducting ceramic membrane is one of the most promising materials because it can be used for separation of oxygen from the mixture gas. The $ABO_3$ perovskite structure shows high chemical stability at high temperatures under reduction and oxidation atmospheres. $BaCo_{1-x-y}Fe_xZr_yO_{3-{\delta}}$ (BCFZ) was well-known material as high mechanical strength, low thermal conductivity and stability in the high valence state. Glycine Nitrate Process (GNP) is rapid and effective method for powder synthesis using glycine as a fuel and show higher product crystallinity compared to solid state reaction and citrate-EDTA method. BCFZ was fabricated by modified glycine nitrate process. In order to control the burn-up reaction, $NH_4NO_3$ was used as extra nitrate. According to X-Ray Diffraction (XRD) results, BCFZ was single phase regardless of Zr dopants from y=0.1 to 0.3 on B sites. The green compacts were sintered at $1200^{\circ}C$ for 2 hours. Oxygen permeability, methane partial oxidation rate and hydrogen production ability of the membranes were characterized by using Micro Gas Chromatography (Micro GC) under various condition. The high oxygen permeation flux of BCFZ 1-451 was about $1ml{\cdot}cm^{-2}s^{-1}$. Using the humidified Argon gas, BCFZ 1-433 produced hydrogen about $1ml{\cdot}cm^{-2}s^{-1}$.