• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.3
• /
• pp.110-119
• /
• 2017

This study develops a passive traffic signal priority control algorithm for emergency vehicles. The passive priority control estimates and applies signal times for each signalized intersection on the emergency vehicle's route when an emergency call is received. As signals are controlled before the emergency vehicle leaves for its destination, it is possible to clear the queues at each intersection more effectively. Most of the previous studies applied preemption, which ends green time of cross streets when the emergency vehicle arrives at each intersection. This study applies green extension and early green in order not to shift the order of phases, and guarantees minimum green time for each phase. Simulation results show that the delay of emergency vehicles decreases when the signals are controlled. It is expected that delays can be decreased further by integrating the active priority control with the passive priority control algorithm presented in this study.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.3
• /
• pp.239-246
• /
• 2015

Enforced environmental regulations call for extending the domain of manufacturers' responsibility to the entire product life cycle. To comply with the environmental regulations, manufacturers have constructed reverse logistics networks to re-collect their leftover waste for recycling consumed resources. However, the operational activities associated with storage, loading and transportation processes within the networks inevitably impose environmental burdens. Particularly, the transportation process largely influences environmental performance due to perpetual uses of transportation vehicles. Therefore, there is a need to develop an environmentally-conscious transportation model that can efficiently manage the uses of transportation vehicles. Additionally, it is vital to analyze its significances of environmental performance to compare quantitatively it with existing models. This paper proposes a transportation model for improving environmental performance in a reverse logistics network. This paper also presents a case study to perform its comparative analysis using Life Cycle Assessment that evaluates potential environmental impacts of a product system.

• Journal of Fashion Business
• /
• v.23 no.2
• /
• pp.62-76
• /
• 2019

The importance of color is increasing in modern life and we call such present age that is 'color age'. These day that all areas of life are being getting fashionize, ordinary people as well as design specialist are required of culture and knowledge about color. Color design education is important curriculum at liberal arts course and in special design trainning course. Color expresses by hue, value and chroma in Munsell color system. But design spot is using mainly hue and tone color system. Therefore it is very important that educate tone concept in color design education. When think influence that increase of color, we must develop hue and tone color system in suitable for color design education. This research designed usable 'Hue and Tone 313 Colot System' for efficeint sensual color education. Also I designed 313 color papers with attached the Munsell notation which could reappear the spare color paper when needed. The 10 hues classification of this system are Red, Yellow Red, Yellow, Green Yellow, Green, Blue Green, Blue, Purple Blue, Purple, Red Purple. The 19 tones classification of this system are vivid, light, standard, deep, pale, soft, dull, dark, very pale, light grayish, medium grayish, dark grayish, very dark, off White, off Pale, off Light Gray, off Medium Gray, off Dark Gray, off Black. The special colors of this system are gold, silver and copper.

• The Korean Journal of Applied Statistics
• /
• v.10 no.1
• /
• pp.15-27
• /
• 1997

Randomized block design (RBD) with three replication is very frequently adopted in agricultural experiments of the Rural Development Administration of Korea. Even though it works well in field trials of traditional crops, it may not accomodate trial site conditions and/or experimental environment. In this research report, we deal with two such cases. The first case is for a crop experiment in green houses. In house conditions, RBD may not be appropriate since it cannot reflect two directions of the yield gradient. So, a Latin square design is suggested as an alternative. The second case is for local field experiments of the newly-inbred rice. RBD with three replications is used without doubt for decades, even though the site layout is not appropriately shaped for the design. In this case, we suggest the RBD in two blocks with multiple replicates for control varieties as an alternative. To improve the quality of statistical experimental designs in over one-thousand agricultural trials performed annually in the Rural Development Administration, we need to re-train agricultural researchers on the design and analysis of experiments and call for concerns of Korean statisticians.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.42 no.2
• /
• pp.89-95
• /
• 2022

This experiment was conducted to investigate the change in the productivity of Italian ryegrass seeds according to the inter-row spacing in the southern region of the Korean Peninsula. Italian ryegrass (Lolium multiflorum Lam.) 'Green Call' variety was sown in Jinju, Gyeongnam in the fall of 2020 with three inter-row spacings (20, 30 and 40 cm). The experiment was arranged a randomized block design with three replications. The ryegrass was sown on October 17, 2020, and the harvest was on May 31, about 60 days from the first heading stage. There was no difference among treatments with an average of April 27^th in heading stage. Plant height was significantly longer at 30 cm seeding interval and the shortest in 20 cm treatment. The length of the spike was the longest in the 40 cm seeding interval, and the number of seeds per spike was the highest in the 20cm seeding interval, but there was no significant difference among treatments. The seed yield was the highest at the 20 cm sowing interval (2,180 kg/ha), and decreased as the spacing increased. The dry matter content of seeds and straw was found to be 44.90% and 45.51% on average, and there was no significant difference among treatments. The amount of remaining straw after harvesting was found to be 7,506 kg/ha on average on DM basis, and was high at the 20 cm seeding interval. In view of the above results, it was found that it is most advantageous to sow at intervals of 20 cm when producing Italian ryegrass seeds through autumn sowing in the southern region.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.42 no.1
• /
• pp.41-46
• /
• 2022

To investigate the domestic seed production potential of Italian ryegrass, it was sown in autumn in the southern region and harvested in the spring of the following year to investigate the productivity and quality of seeds and straw. Italian ryegrass (Lolium multiflorum Lam.) 'GreenCall' variety was sown in Jinju, Gyeongnam in the fall of 2020 with three seeding rates (20, 30 and 40 kg/ha). The experiment was arranged consisted of a randomized block design with three replications. The ryegrass was sown on October 17, 2020, and the harvest was on May 31, about 60 days from the heading stage. The heading stage of Italian ryegrass was April 28, and there was no difference among treatments. Plant height was significantly shorter in the 40 kg/ha seeding treatment group, and there was no significant difference in the remaining treatments. The resistance of lodging, disease, and cold did not show significant differences among treatments. Spike length and number of seeds per spike were highest at 20 kg/ha seeding amount, and there was no difference in the remaining treatments. The seed yield was the highest at 1,956 kg/ha in the 20 kg/ha seeding rate, and there was no difference in the 30 and 40 kg/ha seeding rates. The dry matter content of seeds and straws was 45.60 and 41.83% on average, and there was no significant difference among treatments. The amount of remaining straw after seed harvesting was found to be 7,689 kg/ha on average on a dry basis, and it was high in the 40 kg/ha sowing area, but there was no significant difference among treatments. According to the above results, it was found that it is most advantageous to sow at 20 kg/ha when producing Italian ryegrass seeds through autumn sowing in the southern region.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.44 no.2
• /
• pp.64-70
• /
• 2024

The experiment was conducted to determine the changes in seed productivity of Italian ryegrass (Lolium multiflorum Lam.) according to nitrogen fertilization levels in the southern region of Korea. Italian ryegrass (IRG) variety 'Green Call' was sown in the fall of 2021 in Jinju, Gyeongsangnam-do. The experiment consisted of three nitrogen fertilizer levels (100, 120, and 140 N kg/ha) with three replications using a randomized complete block design. Harvesting was done approximately 30 days after heading on May 18th. There was no difference in heading date among treatments, which occurred on April 18th. The longest IRG was observed in the 140 N kg/ha treatment, but there was no significant difference. No significant differences were observed in lodging, disease resistance, and cold tolerance among treatments, but lodging was severe in all treatments. The length of the spike averaged 44.95 cm, with no difference among treatments, and the number of seeds per spike was highest in the 120 N kg/ha treatment. Seed yield increased with increasing nitrogen fertilizer levels, averaging 3,707 kg/ha (as-fed basis). DM content of seed and straw averaged 76.95% and 62.19%, respectively, with no significant differences among treatments. The remaining straw after harvesting averaged 6,525 kg/ha on a dry matter basis, with the highest value observed in the 140 N kg/ha treatment. Overall, considering the results, the optimal nitrogen fertilizer application rate for seed production of Italian ryegrass in the southern region when sown in autumn was found to be 120 N kg/ha.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.4
• /
• pp.268-275
• /
• 2005

Early predictions of crop yields call provide information to producers to take advantages of opportunities into market places, to assess national food security, and to provide early food shortage warning. The objectives of this study were to identify the most useful parameters for estimating yields and to compare two model selection methods for finding the 'best' model developed by multiple linear regression. This research was conducted in two 65ha corn/soybean rotation fields located in east central South Dakota. Data used to develop models were small temporal variability information (STVI: elevation, apparent electrical conductivity $(EC_a)$, slope), large temporal variability information (LTVI : inorganic N, Olsen P, soil moisture), and remote sensing information (green, red, and NIR bands and normalized difference vegetation index (NDVI), green normalized difference vegetation index (GDVI)). Second order Akaike's Information Criterion (AICc) and Stepwise multiple regression were used to develop the best-fitting equations in each system (information groups). The models with $\Delta_i\leq2$ were selected and 22 and 37 models were selected at Moody and Brookings, respectively. Based on the results, the most useful variables to estimate corn yield were different in each field. Elevation and $EC_a$ were consistently the most useful variables in both fields and most of the systems. Model selection was different in each field. Different number of variables were selected in different fields. These results might be contributed to different landscapes and management histories of the study fields. The most common variables selected by AICc and Stepwise were different. In validation, Stepwise was slightly better than AICc at Moody and at Brookings AICc was slightly better than Stepwise. Results suggest that the Alec approach can be used to identify the most useful information and select the 'best' yield models for production fields.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.127-130
• /
• 2005

Internal cities such as gray level been enclosed to building forest are paying a lot of efforts and expenses to change to green city that park and street tree get put together. By the example, 'GREEN CITY of PUSAN 21' progress to decorate army facilities like the park, and to plant street trees in several places of city plan in Pusan. And urban environment that big cities of advanced nation are agreeable is making in the large park and road street trees at several places in downtown. Because price of tree for the park is very expensive, tree management system was all-important. In this paper, Motes deliver the sensor information in each tree through radio sensor network by server side. This information can use in state grasping of tree, harmful insects courtesy call etc and this system design was suggested to inform to mode of life administration scholars.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2005.10a
• /
• pp.217-220
• /
• 2005

Internal cities such as gray level been enclosed to building forest are paying a lot of efforts and expenses to change to green city toot park and street tree get put together. By the example, 'GREEN CITY of PUSAN 21' progress to decorate army facilities like the park, and to plant street trees in several places of city plan in Pusan. And urban environment that big citys of advanced nation are agreeable is making in the large park and road street trees at several places in downtown. Because price of tree for the park is very expensive, tree management system was all-important. In this paper, Motes deliver the sensor information in each tree through radio sensor network by server side. This information can use in state grasping of tree, harmful insects courtesy call etc and this system design was suggested to inform to mode of life administration scholars.