• Journal of the Korean Institute of Landscape Architecture
• /
• v.50 no.1
• /
• pp.68-77
• /
• 2022

The human thermal environment in an apartment complex located in Seoul was quantitatively analyzed to devise methods to modify human heat-related stresses in landscape and urban planning. Microclimatic data (air temperature, relative humidity, wind speed, and short- and long-wave radiation) were collected at 6 locations [Apt-center, roof (cement), roof (grass), ground, playground, and a tree-lined road] in the late spring and summer, and the data were used to estimate the human thermal sensation, physiological equivalent temperature (PET) and universal thermal climate index (UTCI). As a result, the playground location had the highest thermal environment, and the roof (grass) location had the lowest. The mean difference between the two locations was 0.8-1.1℃ in air temperature, 1.8-4.0% in relative humidity, and 7.5-8.0℃ in mean radiant temperature. In open space locations, the wind speed was 0.4-0.5 ms-1 higher than others. Also, a wind tunnel effect happened at the Apt-center location during the afternoon. For the human thermal sensation, PET and UTCI, the mean differences between the playground and roof (grass) locations were: 5.2℃ (Max. 11.7℃) in late spring and 5.4℃ (Max. 18.1℃) in summer in PET; and 3.0℃ (Max. 6.1℃) in late spring and 2.6℃ (Max. 9.8℃) in summer in UTCI. The mean differences indicated a level change in PET and 1/2 level in UTCI, and the maximum differences showed greater changes, 2-3 levels in PET, and 1-1.5 levels in UTCI. Moreover, the roof (grass) location gave 4.6℃ PET reduction and a 2.5℃ UTCI reduction in late spring, and a 4.4℃ PET reduction and a 2.0℃ UTCI reduction in the summer when compared with the roof (cement) location, which results in a 2/3 level change in PET and a 1/3 level in UTCI. Green infrastructure locations [roof (grass), ground, and a tree-lined road] were not statistically significant in the reduction of PET and UTCI in thermal environment modifying effects. The implementation of green infrastructure, such as rooftop gardens, grass pavement, and street tree planting, should be adopted in landscape planning and be employed for human thermal environment modification.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.5
• /
• pp.82-92
• /
• 2018

The purpose of this study is to develop a model for the density management of planting sites and an additional model for new planting sites. In the Dongtan New Town of Hwaseong, there are buffer green spaces, with widths between 8m and 15m, between roads and apartment complexes. A total 38 survey plots were set to examine the planting patterns and the density of landscape trees. The Crown Overlapping Index (COI) was developed to assess the level of overcrowding as far as tree growth and development effectively. Pinus strobus recorded the most serious level of overcrowding growth and development. Its average density and average COI were very high at $0.3trees/m^2$ and 35.6%, respectively. There were many areas in which its COI was above 45%. The criteria for density management were set by standardizing the COI into three levels, which were above 45% (Type A), 30~45% (Type B), and under 30% (Type C). A model was proposed to manage poorly growing trees and to develop a model to select and manage trees of similar specification based on the planting patterns. The trees of density management areas were reviewed in terms of tree types and the ease of transplanting to establish an application system for the management plans according to the possibility of transplanting, thinning, and pruning. In new buffer green spaces, the planting density of Pinus strobus was lowered to $0.20{\sim}0.25trees/m^2$, with that of shrubs being reduced to $1.5{\sim}2.0trees/m^2$, leading to a planting design model to cover the lower parts in at least 30~40%.

• Environmental and Resource Economics Review
• /
• v.27 no.1
• /
• pp.105-138
• /
• 2018

This paper reports novel empirical results of a choice experiment that elicited the economic values that residents in the Seoul metropolitan area place on the amenity services realized from the landscape views and accessibilities to urban green spaces (i.e., mountains, rivers and urban parks). The 1,000 respondents in the sample were divided into two residential of housing types (apartments vs. houses) and occupancy types (owners vs. tenants). Residents living in apartments are willing to pay an average of 28% (5.0 million KRW per year) above the current housing prices per household for a mountain view, compared to an apartment view from their living room. Their willingness to pay values are about 22% (4.0 million KRW per year) and 10% (1.8 million KRW per year) respectively for a river view and a urban park view. Economic benefits of having access (i.e., a 10 minutes working distance) to mountains, rivers and urban parks are estimated to be an average of 16% (2.9 million KRW per year), 20% (3.6 million KRW per year) and 18% (3.2 million KRW per year), respectively, above the current housing prices per household. On the other hand, access benefits for those residing in houses are 18% (4.7 million KRW per year), 16% (4.1 million KRW per year) and 22% (5.6 million KRW per year) per household, respectively. They are also willing to pay an average of 35% (8.9 million KRW per year) above the current housing prices for keeping or having a garden or vegetation bed. Furthermore, a strong "greenspace premium" is centered around the three Gangnam districts for house-dwellers, whereas it is areas of "new real estate boom" for apartment dwellers.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.4
• /
• pp.357-366
• /
• 2014

Based on fundamental properties and machining characteristics of Yellow poplar (Liriodendron tulipifera L.), it has well performance on machinability or workability, drying, and fine surface. Additionally, yellow poplar is light weight and has bright color with high performance of bending processing, so it could be used for furniture or artworks materials and wood-based panel materials. Recently, public attention has been focused on indoor air quality, and Ministry of environment drift more tight regulation on indoor air quality for an apartment house and public facility with the times. Construction materials has been assessed emission of volatile organic compounds (VOCs) and formaldehyde according to law (No.10789), so yellow poplar is also needed to assess these emission characteristics. Emission of VOC and aldehyde compounds from dry and green wood condition of yellow poplar were investigated with KS M 1998:2009. Based on results, more than 30 compounds were detected from yellow poplar, and lower NVOC (natural VOC) were emitted than AVOC (Anthropogenic VOC) and OVOC (other VOC). Formaldehyde emission was lower than $5{\mu}g/m^3$ and acetaldehyde, ketone, and propionaldehyde were detected from yellow poplar. From dry yellow poplar, m-Tolualdehyde ($33.6{\mu}g/m^3$) was additionally detected while no detection of propionaldehyde. After drying process, amount of ketone emission increased significantly. The unique smell of yellow poplar may not only come from emission of acetaldehyde and propionaldehyde.

• Korean Journal of Environment and Ecology
• /
• v.12 no.3
• /
• pp.253-258
• /
• 1998

It is common in foreign countries to make a compensative plan for environmental destruction which is caused by development action even in where development is permitted. But, in Korea, environmental plan was regarded as just meeting the legal standard of green area in site development. This study focused on the case of university project, LG village plan, is to evaluate the environment of the site using Hemeroby and suggested restoration plan in compensation for the destructive. The site was a huge development area of apartment located in Suwon. First of all, we evaluated the site using Hemeroby and compared this with LG village plan. Then, we made a compensative plan for the environmental destruction which was not compensated in LG village plan. The results were as follows; $\beta$-/$\alpha$-euhemeroby of the Site was 80.1% before the development and, after the development, $\beta$-/$\alpha$-euhemeroby of the site dropped to 43.7％ and meta-hemeroby increased from 56.3% to 17％. Therefore, we could accept the buildings of LG village development plan and suggested a compensative plan with which we could raise $\beta$-/$\alpha$-euhemeroby like restoring the river, greening parking-lots and rooftops, revegetating cut slope.

• Journal of Korean Society of Transportation
• /
• v.27 no.4
• /
• pp.91-100
• /
• 2009

The purpose of this study is to introduce the Levying Garage Option on Car Buyers which has become operative firstly in Korea, and to suggest the way to activate the system, hearing the view of Jeju residents with positive and negative function of parking. Levying Garage Option on Car Buyer is the system to apply a law for establishing garages to all of vehicles. Especially this is proposed to correct the disorder of Local street night parking, to improve the fine view of street, and to recover the original function of street to residents. To make this system successful there should be separate solutions at the densely built up area as a result of survey. This study conduct the Logistic Regression Analysis for and against the system. If the more residents approve the system, we should concern about the several solutions such as easing the distance between the garage and street, regulating, and special plan for an apartment house, etc. The suggestions are as follows. First, the policy needs to ease the distance between the garage and street gradually. Second, the Jeju government need to offer the residents the incentive such as reduce or exempt the tax and make them establish the private parking lot with supplying the low interest loan. Third, there should be connected with the project to break up the fences of their houses.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.275-284
• /
• 2017

As the 3D Greenery system is known to improve the urban environment, it works as new alternative for eco-friendly building and warrants further study for application to the domestic field. This study aimed to apply the design components for eco-friendly composition by investigating the spatial characteristics of the 3D Greenery System reflected in interior and exterior of buildings and to analyze the organization and design elements of domestic and foreign cases. The results showed that instances of the Greenery System tended to be a large scale and high-density development in order to expand various exterior spaces. Although its early forms were often found in such public facilities as exhibition and education purpose, cases of multi-unit dwelling have been growing. Allowing apartment residents to prefer intimate space by providing various such spaces for residential units and offering independent green spaces would induce diverse residents' lifestyles rather than monotonous design. The analysis also indicated that community space composed of various outdoor spaces and atmosphere would change life patterns of multi-housing and establish a real neighborhood through social interaction. Moreover, further investigation of the design patterns of outdoor space arrangement is needed since the Greenery system actively reflects the environmental characteristics of building sites and clearly shows a tendency to utilize natural terrain and slope in building shapes.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.52 no.2
• /
• pp.51-63
• /
• 2024

While the government policy to fully adopt BIM in the construction sector is being implemented, the construction and utilization of landscape BIM models are facing challenges due to problems such as limitations in BIM authoring tools, difficulties in modeling natural materials, and a shortage in BIM content including libraries. In particular, plants, fundamental design elements in the field of landscape architecture, must be included in BIM models, yet they are often omitted during the modeling process, or necessary information is not included, which further compromises the quality of the BIM data. This study aimed to contribute to the construction and utilization of landscape BIM models by developing a plant library that complies with BIM standards and is applicable to the landscape industry. The plant library of trees and shrubs was developed in Revit by modeling 3D shapes and collecting attribute items. The geometric information is simplified to express the unique characteristics of each plant species at LOD200, LOD300, and LOD350 levels. The attribute information includes properties on plant species identification, such as species name, specifications, and quantity estimation, as well as ecological attributes and environmental performance information, totaling 24 items. The names of the files were given so that the hierarchy of an object in the landscape field could be revealed and the object name could classify the plant itself. Its usability was examined by building a landscape BIM model of an apartment complex. The result showed that the plant library facilitated the construction process of the landscape BIM model. It was also confirmed that the library was properly operated in the basic utilization of the BIM model, such as 2D documentation, quantity takeoff, and design review. However, the library lacked ground cover, and had limitations in those variables such as the environmental performance of plants because various databases for some materials have not yet been established. Further efforts are needed to develop BIM modeling tools, techniques, and various databases for natural materials. Moreover, entities and systems responsible for creating, managing, distributing, and disseminating BIM libraries must be established.