• Title/Summary/Keyword: Great jar

Search Result 7, Processing Time 0.03 seconds

A Study on the Bonding Materials used for the Great Jar of the Proto-Three Kingdoms Period from Daechuri Site, Pyeongtaek (평택 대추리 유적 출토 원삼국시대 대형옹(甕)에 사용된 접착재료 연구)

  • Cho, Nam-Chul;Kim, Soo-Chul;Kim, Woo-Hyun;Shin, Yeun-Sik
    • Journal of Conservation Science
    • /
    • v.26 no.4
    • /
    • pp.371-376
    • /
    • 2010
  • The great jar estimated in Proto-Three Kingdoms period was found at the site from Pyeongtaek Daechuri and the bonding traces from pieces destroyed when they were excavated are observed. Therefore this study would figure out the components of bonding material used in great jars by optical microscope, FT-IR, py-GC/MS and the kind of textile attaching to great jar by transmitted light microscope. As a result of optical microscope for the cross-section, black material is uniformly applied between a piece of jar and the part of bonding and the textile line are observed. Black bonding material is resulted in korean rhus lacquer by FT-IR and py-GC/MS and the kind of textile is identified as hemp by transmitted light microscope. Materials for repairing archaeological objects are hardly known causing little information, but this study proves that the bonding material had used lacquer for great jars before Proto-Three Kingdoms period. Therefore if ancient bonding materials are systematically analysed in the further studies, it would be significant help for studying bonding and restoration materials of ancient objects.

A Study on Aircraft Fuel Requirements (항공기 연료탑재 기준에 관한 연구)

  • Noh, K.S.;Choi, Y.C.;Yoo, K.E.
    • Journal of the Korean Society for Aviation and Aeronautics
    • /
    • v.13 no.1
    • /
    • pp.9-19
    • /
    • 2005
  • Airplane fuel takes large portion of airline operation cost and recently it has been grown up to about 25% of operating cost. So airlines are making efforts to reduce fuel consumption continuously and also aircraft manufacturers are making efforts to develop less fuel-consuming engines but it takes great expenses and times to develop such engines. In this study, fuel requirements of FAR and JAR, especially contingency fuel requirements, are compared and the effectiveness of each method is analyzed.

  • PDF

How to Insert Acupuncture Needles into the Subacromial Space through LI15

  • Lee, Kwang Ho
    • Journal of Acupuncture Research
    • /
    • v.38 no.3
    • /
    • pp.242-244
    • /
    • 2021
  • LI15 is an important acupuncture point to treat shoulder pain. There are 4 needling methods for LI15 in the textbook; 1 method requires the insertion of the needle horizontally between the acromion and the great tuberosity of the humerus with the arm lowered for supraspinatus tendonitis. This method is also applicable for all conditions of rotator cuff disease, but it has not previously been described in detail. Providing X-ray scans and describing needle direction and depth of insertion will provide evidence for needling with the arm down as an effective stimulation of the subacromial space. Firstly, for this technique, with the arm raised, a concave point is located between the front edge of the acromion and the humerus, and the lower upper arm. Secondly, the acupuncture needle is inserted slightly posteriorly towards the supraspinous fossa, in the direction of the supraspinatus tendon and to a depth of 30-40 mm.

Clay Source Interpretation and Making Characteristics of Proto-Three Kingdoms Period Potteries from Cheonan and Asan in Korea: Focusing on the Bakjimeure Site (천안-아산지역 원삼국시대 토기의 제작특성과 원료산지 해석: 밖지므레 유적을 중심으로)

  • Kim, Ran Hee;Jung, Jewon;Lee, Chan Hee
    • Journal of Conservation Science
    • /
    • v.29 no.2
    • /
    • pp.171-185
    • /
    • 2013
  • The purpose of this study were to interpret making characteristics and clay sources for Proto-Three Kingdoms period potteries which were excavated from Bakjimeure site in Tangjeong, Asan, Korea, on the basis of shape types. The pottery samples of the studied included deep bowl pottery, cylinder shaped pottery, duck shaped pottery and rounded based jar with short neck. And the last jar was dominant among them. This is supported in nearby Yongduri Jinter site, Galmaeri site and Baekseokdong site. They vary in terms of color of clay, absorption ratio and mineral classification. Based on the fact that their absorption ratio range was 4.50 to 25.19% and firing temperature range was 850 to $1,150^{\circ}C$, they were thought to be widely used. The equivalence of cylinder shaped pottery, duck shaped pottery and deep bowl pottery was high in terms of material characteristics and their firing temperature range was 850 to $950^{\circ}C$. However, the deep bowl pottery, compared to other pottery shapes, contained great amount of coarse grained quartz and feldspar, and was different from others in terms of function. For soil sample collected from relative plains (area 3) in the southernmost part of the site, their mineralogical and geochemical characteristics were the most similar to those of the potteries excavated from the Bakjimeure site and even most of the potteries collected from different sites.

Characteristics of DOC Removal by Coagulation Process in the Water Treatment of Nakdong River (낙동강 수계에 대한 정수처리공정에서 응집공정의 DOC 제거 특성)

  • Hwang, Deok-Heung;Kim, Dong-Young
    • Journal of Korean Society of Water and Wastewater
    • /
    • v.13 no.2
    • /
    • pp.66-73
    • /
    • 1999
  • This study was carried out to derive the removal characteristics of target materials(DOC and turbidity) during the coagulation process after the injection of coagulants(PACl and FeCl3). Used apparatus were a jar test and a pilot plant. A great portion of DOC among the total removed DOC was achieved at the slow mixing process among the coagulation process. The ranges of removed DOC and optimum pH for each coagulant were 0.45~1.47mg/l and 6.0~6.5 by PACl, and 0.97~2.61mg/l. and 5.0~5.5 by FeCl3, respectively. Both of coagulants showed little increase of DOC removal above coagulant dosage 20mg/l Molecular weight distribution(MWD) of removed DOC was measured by get filtration(GF) technique. The MWD variation by gel filtrationin(GF) for removed DOC in the coagulation process were as follows; for raw water, the percentages of each MWD for total area were < MW 6,500 25.5%, MW 6,500~66,000 67.1%, and > MW 66,000 7.4%. For the same coagulant dosage(12mg/l), the percentages of each MWD for total area by PACl were < MW 6,500 20.5%, MW 6,500~66,000 48.7%, and > MW 66,000 9.1%, and those of FeCl3 were MW 66,000 18.2%. For each coagulant, the removal percentage of MW 6,500~66,000 occurred a little, but at a part of

  • PDF

Illustrations of the Nine Types of Needles based on Huangdi's Internal Classic Ling-shu

  • Kim, Hyo Jin;Lee, Kwang Ho;Yang, Gi Young
    • Journal of Acupuncture Research
    • /
    • v.36 no.1
    • /
    • pp.38-44
    • /
    • 2019
  • Background: The phrase "Nine Needles" refers to the 9 types of acupuncture needles describing their shapes, sizes, and uses in Huangdi's Internal Classic Ling-shu. The aim of this study was to present 3D illustrations of the "Nine Types of Needles" based on Huangdi's Internal classic Ling-shu, taking into consideration the conformation and application of the Nine Needles. Methods: Sketches of the "Nine Needles" were based on references to those needles cited in Huangdi's Internal Classic Ling-shu, the Great Compendium of Acupuncture and Moxibustion, and the Golden Mirror of Medicine. The computer programs Creo 3.0, Keyshot 5, Adobe Photoshop CS5, and Adobe Illustrator CS5 were used for 3D modelling and visualization. Results: Based on a review of Huangdi's Internal Classic Ling-shu, illustrations of the Spade needle, Round-Pointed needle, Pressure needle, Sharp-Edged needle, Sword-Shaped needle, Round-Sharp needle, Fine needle, Long needle, and Large needle, 3D models were created. The Spade needle had a sharp, large head, the Round-Pointed needle had an egg-shaped tip, and the Pressure needle had a blunt head like a grain of millet. The Sharp-Edged needle had a sharp blade with a triangular edge for bloodletting. The Sword-Shaped needle resembled a sword. The Round-Sharp needle resembled a horse's tail. The Fine needle and the Long needle had sharp points and thin bodies. The Large needle had a cylindrical shaft and rounded tip. Conclusion: This study demonstrated that 3D illustrations could be generated for the Nine Needles according to the descriptions and figures provided in the ancient literature.

Comparative Study on the Dancheong(丹靑) of Buddhist Temples in Jeolla Region focused on the Dancheong of the main building of Mihwangsa Buddhist Temple at Haenam(海南) (전라도지역 사찰단청(寺刹丹靑)의 비교 연구 해남 미황사(美黃寺) 대웅전(大雄殿) 단청을 중심으로)

  • Lee, Su Yee
    • Korean Journal of Heritage: History & Science
    • /
    • v.42 no.4
    • /
    • pp.152-171
    • /
    • 2009
  • The Dancheong(丹靑) of the main building of Mihwangsa Buddhist Temple(美黃寺) in Haenam(海南) is the leading work of the Jeolla Dancheong style, which was created in the 18th century and has been passed down to the early modern days, and boasts its excellence and originality. On the outside, one can only see the traces of the Dancheong due to the colors that fell off and deteriorated severely. On the inside, however, the general Dancheong pattern is accompanied by the painting of 1,000 Buddhas(千佛圖), which is hardly found in other Buddhist temples, and the Arahan painting, which is truly magnificent in technique and can pass as an independent painting. The Dancheong also has unique methodological characteristics that can't be found in other Dancheong works such as the painting and attaching technique. The Dancheong inside is estimated to have been created in 1754 considering the records of "Dalmasan Mihwangsasa Daebeopdang Jungsusangryangmun(達摩山美黃寺大法堂重修上樑文)", the calligraphical writings of "Mudeungsanindanhwakya(無等山人丹?也)"and "Geonryungshipgu(乾隆十九)" left in the Jungryang, and the style characteristics reflected in the Dancheong patterns and the painting of 1,000 Buddhas. The fact that there are no traces of re-Dancheong also supports the estimation that the Dancheong was created in the absolute age of 1754. The absolute age will be the reference of deciding the chronological years of Dancheong patterns and be helpful in examining the characteristics and changes by the periods. There were certain style characteristics in Dancheong by the periods and regions. The Dancheong of Jeolla region also had its own style, which includes the tendency of finishing with two- or three-fold green belts without giving meokdanggi to the meoricho and the huge jar decoration of huigol. Treating the baetbadak of all materials, whether it's Geumdancheong or morodancheong, with lines of certain thickness and colors is another style of Jeolla Dancheong from the 18th to the 20th century. The Dancheong of the Geukrakbojeon(極樂寶殿) of Cheoneunsa Buddhist Temple and Daewoongbojeon(大雄寶殿) of Naesosa Buddhist Temple in Jeolla is especially noteworthy in that it bears similar patterns and techniques to that of the main building of Mihwangsa Buddhist Temple in addition to the characteristics mentioned above. The Dancheong of Mihwangsa Buddhist Temple must have exerted so great influences on that of the two temples that it's called "the style of Mihwangsa Buddhist Temple."When adopting a broader point of view, it can be classified as one of the Dancheong styles of Jeolla. The common icons and techniques found in the Dancheong of Mihwangsa, Cheoneunsa, and Naesosa Buddhist Temple provide some clues about the influential relationships among painters of the days. They may have been created by the painters of the same school or the painters affected by those who created the Dancheong of Mihwangsa Buddhist Temple.