• 치과방사선
• /
• 제22권2호
• /
• pp.273-282
• /
• 1992

The purpose of this study was to propose the utility which was evaluated the digital image processing and clinical application of the videodensitomery. The experiments were performed with IBM-PC/16bit-AT compatible, video camera(CCdtr55, Sony Co., Japan), an color monitor(MultiSync 3D, NEC, Japan) providing the resolution of 512×480 and 64 levels of gray. Sylvia Image Capture Board for the ADC(analog to digital converter) was used, composed of digitized image from digital signal and the radiographic density was measured by 256 level of gray. The periapical radiograph(Ektaspeed EP-21, Kodak Co., U. S. A) which was radiographed dried human mandible by exposure condition of 70 kVp and 48 impulses, was used for primary X-ray detector. And them evaluated for digitzed image by low and high pass filtering, correlations between aluminum equivalent values and the thickness of aluminum step wedge, aluminum equivalent values of sound enamel, dentin, and alveolar bone, the range of diffuse density for gray level ranging from 0 to 255. The obtained results were as follows: 1. The edge between aluminum steps of digitized image were somewhat blurred by low pass filtering, but edge enhancement could be resulted by high pass filtering. Expecially, edge enhancement between distal root of lower left 2nd molar and alveolar lamina dura was observed. 2. The correlation between aluminum equivalent values and the thickness of aluminum step wedge was intimated, yielding the coefficient of correlation r=0.9997(p<0.00l), the regression line was described by Y=0.9699X+0.456, and coefficient of variation amounting to 1.5%. 3. The aluminum equivalent values of sound enamel, dentin, and alvolar bone were 15.41㎜, 12.48㎜, 10.35㎜, respectively. 4. The range of diffuse density for gray level ranging from 0 to 255 was wider enough than that of photodenstiometer to be within the range of 1-4.9.

• Journal of Welding and Joining
• /
• 제22권6호
• /
• pp.43-49
• /
• 2004

In this study, a visual sensor system which can detect I-butt weld joint with height variation and includes a seam tracking algorithm was investigated. Three-dimensional position of an object can be acquired by using the method of distance measurement, i.e., an optical trigonometry which results from the spatial relations between the camera, the object and the structured light by a visible laser. Effects of laser intensity and iris number for the image quality as well as object material were investigated for the optical system design. For the image processing, a region of interest is defined from the whole image and a line image of laser is drew by using the gray level difference in the image. From the drew laser line, the weld joint can be recognized in searching the biggest point position calculated from the central difference method. Through a series of welding experiments, a good tracking performance was confirmed under GMA welding.

• Current Optics and Photonics
• /
• 제7권4호
• /
• pp.387-397
• /
• 2023

Tooth surface shape error is an important parameter in gear accuracy evaluation. When tooth surface shape error is measured by laser interferometry, the gear interferogram is highly distorted and the gray level distribution is not uniform. Therefore, it is important for gear interferometry to extract the foreground region from the gear interference fringe image directly and accurately. This paper presents an approach for foreground extraction in gear interference images by leveraging the sinusoidal variation characteristics shown by the interference fringes. A gray level mask with an adaptive threshold is established to capture the relevant features, while a local variance evaluation function is employed to analyze the fluctuation state of the interference image and derive a repair mask. By combining these masks, the foreground region is directly extracted. Comparative evaluations using qualitative and quantitative assessment methods are performed to compare the proposed algorithm with both reference results and traditional approaches. The experimental findings reveal a remarkable degree of matching between the algorithm and the reference results. As a result, this method shows great potential for widespread application in the foreground extraction of gear interference images.

• 한국가정과학회지
• /
• 제1권2호
• /
• pp.113-118
• /
• 1998

Clothing shape is principally described in seven factors that are composed of clothing design, clothing material, clothing size, pattern design, sewing method and body motion etc.. The aims of this study was to measurement out-line space-shape variation of clothing fitness with somato type by using the image processing. The subjects for direct anthropometric measurements were 248 female college students aged from 19 to 22. The data were statistically analyzed by principal analysis and cluster analysis. The results were obtained three somato type. Also I made skirts in order to analyzed to the out-line space-shape variation of clothing fitness with body. The effect of somato type on the shape of flare skirts was determined by the out-line space-shape variation of clothing fitness with body. The out-line space-shape variation of clothing fitness with body was observed between the node number and amplitudes of clothing wave form and node number was determined at the maxim of space-shape amplitude, and the space-shape amplitudes have related with aspect ratio of cross-sectional shape. Results for flare skirts show changes in amplitude and mean with fabrics, somato type. therefore gray-level histogram are correlated with changes out-line space-shape, differences in drape spacing and related fabric properties and their somato type. (Korean J Human Ecology 1(2):113∼110 1998)

• 한국임상수의학회지
• /
• 제39권3호
• /
• pp.114-120
• /
• 2022

The purpose of this study is to examine the status of quality control using multipurpose phantom of ultrasound equipment used in hospital of veterinary college in South Korea by using ATS-539 multipurpose phantom so as to examine quantitative and objective new image evaluation method. Specialists discussed and analyzed multipurpose phantom images acquired by using convex transducer of 10 ultrasound imaging devices, currently used in 9 veterinary colleges, at 4.0-6.0 MHz. Total 8 items that can be measured with ATS-539 multipurpose phantom including dead zone, vertical and horizontal measurement, axial/lateral resolution, sensitivity, focal zone, functional resolution and gray scale/dynamic range were evaluated. For qualitative evaluation, valid decisions were made based on dead zone, axial/lateral resolution, and gray scale/dynamic range which are resolution index, and coefficient of variation (COV) and blind referenceless image spatial quality evaluator (BRISQUE) were found to increase objectivity. As a result of experiment, all the targeted ultrasonic devices were found appropriate from qualitative evaluation items of dead zone, axial/lateral resolution, and gray scale/dynamic range. In other evaluation items, they were found to be appropriate from focal zone and vertical measurement of quantitative evaluation while inappropriate from horizontal measurement, sensitivity, and functional resolution. COV value was 0.12 ± 0.04, and BRISQUE value was 47.77 ± 2.77, both analysis results show that the noise level of all ultrasonic devices was located within tolerance range. Upon image examination using ATS-539 multipurpose phantom, they were 100% appropriate with inspection standards of dead zone, axial/lateral resolution, and gray scale/dynamic range, and besides, focal zone and functional resolution can be used as evaluation items. In the field of veterinary medicine, 8 standard items using ATS-539 multipurpose phantom and image evaluation items using COV and BRISQUE can be used as standards for quality control of ultrasonography machine.

• Journal of Welding and Joining
• /
• 제13권1호
• /
• pp.115-126
• /
• 1995

Vision sensors using the optical triangulation have been widely used for automatic welding systems in various ways, but their reliability is seriously affected by presence of the arc noise. The reliability of vision sensors was analyzed with variation of the arc noise by considering the reflectance of the base metal. first, the properties of the base metal's reflection were modelled by using the Bidirectional Reflectance-Distribution Function(BRDF), and then the variation of the reflected arc intensity was formulated for various configurations of the torch, base metal, and sensor. The experimental data of the gray level of the reflected arc light were obtained for two materials, mild steel and stainless steel. It was found that the results calculated from the proposed model were in good agreement with the experimental data.

• 한국작물학회지
• /
• 제68권3호
• /
• pp.147-166
• /
• 2023

Seed color is controlled by several genes and is a key trait in determining the metabolite content and biological activities of legume genotypes. In this study, 296 adzuki bean accessions, including 159 grey, 99 red, and 38 white adzuki beans, were grown in Korea. Variations in total phenolic content (TPC), total saponin content (TSC), DPPH^• scavenging activity, ABTS^•+ scavenging activity, and ferric reducing antioxidant power (FRAP) were assessed and were reported to be in the ranges of 1.52-8.24 mg GAE/g, 14.36-114.22 mg DE/g, 0.23-12.84 mg AAE/g, 1.05-17.66 mg TE/g, and 0.59-13.14 mg AAE/g, respectively, with a wide variation across adzuki beans. Except for DPPH^• scavenging activity, the average values declined in the order gray > red > white adzuki beans, each demonstrating a significant variation (p < 0.05). White adzuki beans, which showed low metabolite content and antioxidant activity, were clearly separated from the gray and red genotypes using principal component and hierarchical cluster analyses. Moreover, TPC, TSC, and antioxidant activities were strongly correlated, regardless of seed color. Overall, the diversity of the TPC, TSC, and antioxidant activity in a broad population of adzuki bean genotypes was determined. Furthermore, this study found that seed color variation in adzuki beans had a significant effect on the metabolite content and antioxidant activity. Superior accessions with high levels of TPC, TSC, and antioxidant activity were also discovered and could be used for functional plant breeding and human consumption. The findings of this study may be useful for understanding the relationship between seed coat color and metabolite concentration in adzuki beans, paving the way for molecular-level analyses.

• 대한전자공학회논문지SD
• /
• 제44권3호
• /
• pp.65-71
• /
• 2007

본 논문에서는 지문센서의 주변환경 변화에 따른 획득 이미지의 왜곡을 보상하기 위한 픽셀 수준의 자동보상회로를 설계하고 $0.35{\mu}m$ CMOS공정을 적용하여 칩으로 구현하였다. 적용된 센서는 $48\times48$ 픽셀의 용량형 센서로서 센서의 출력 전압과 기준 전압을 비교하여 이진의 영상을 출력하게 된다. 기준전압을 제어하여 왜곡된 이미지를 보상하기 위한 알고리즘을 제안하였으며 기준전압제어를 위하여 기존의 DAC와 같은 복잡한 회로 대신 비휘발성 메모리에 적용되는 승압회로를 픽셀별로 적용하였다. 본 논문에서는 승압회로에 의한 이미지보상효과를 얻을 수 있었으며 아울러 16단계의 회색 이미지를 얻음으로써 지문의 인증율을 높일 수 있었다.

• Journal of Microbiology and Biotechnology
• /
• 제8권5호
• /
• pp.490-496
• /
• 1998

Random amplified polymorphic DNA (RAPD) markers were used to survey genetic variability among 34 Botrytis cinerea isolates from nine different host plants in Korea. For RAPD analysis, 115 arbitrary decamer primers were initially screened for polymorphic major DNA bands with 11 representative B. cinerea isolates. Eleven primers that initially detected polymorphisms were tested a second time with additional 23 isolates of B. cinerea as well as one isolate of Botrytis squamosa as an outgroup. The RAPD analyses revealed that all isolates except one showed different molecular phenotypes. Dendrograms obtained from dissimilarity matrices using the unweighted paired group method of arithmetic means (UPGMA) showed the 36.4% to 90.0% similarity among all B. cinerea isolates. The B. squamosa isolate showed the least similarity to all B. cinerea isolates. The cluster analyses indicated no correlation among all the characteristics examined including molecular phenotypes, host and geographic origins, year of isolation, or pathogenicity. The RAPD data suggest that a high level of genetic variation exists among Korean populations of B. cinerea and it seems to be caused by heterokaryosis among preexisting molecular phenotypes.

• 한국통신학회논문지
• /
• 제27권3A호
• /
• pp.258-267
• /
• 2002

본 논문에서는 저자 등이 질감특징으로 제안한 바 있는 BDIP(block difference of inverse probabilities) 모멘트 특징과 새로이 질감특징으로 제안하는 BVLC(block variation of local correlation coefficient) 모멘트 특징을 기존의 웨이브렛 모멘트 질감특징과 융합하여 칼라영상을 대상으로 검색하는 내용기반 검색법을 제시하였다. 효율적인 융합을 위해 각 특징벡터들에 대한 가중치는 전체 DB에서 각 특징벡터의 성분이 가지는 표준편차와 각 특징벡터가 가지는 차원과의 곱의 역수로 하였다. 시험영상으로는 Corel Draw Photo DB와 Vistex 질감영상 DB를 사용하였다. 실험결과, 제안한 검색기법은 일반영상뿐만 아니라 질감영상에서도 웨이브렛 모멘트 특징보다 7%정도 성능이 향상됨을 확인할 수 있었다.